|
| 1 | Taking down chowkats with shutter (without taking off shutter from the frame) n exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 2 | All as per item No 01 above but exc 1.5 sqm but n exc 4.0 sqm each. |
| 3 | Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed. |
| 4 | All as per item No 03 but exc 1.0 sqm but n exc 2.0 sqm each. |
| 5 | S&F for Pressed steel frames of size 105 x 60mm for doors , windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded aggregate) filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 6 | S&F for Pressed steel frames of size 125 x 60mm for doors , windows and ventilators etc, with one or more rebates including PCC 1:2:4 type B0 (12.5mm graded aggregate) filling in hollow frame section and necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 7 | Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 8 | S&F for 35mm thick 2nd class hardwood Plain, framed panelled shutters(any No of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers fixed to chowkats complete all as specified and directed. |
| 9 | S&F for 30mm thick 2nd class hardwood for glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as per SSR-Part-I Section-8, Clause 8.24 (a) etc complete all as specified and directed. |
| 10 | All as per item No 09 above but 25mm thick for window, ventilatators etc. |
| 11 | S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 12 | Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M>S frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site as per complete all as specified and directed. |
| 13 | S&F Butt hinges 100 mm long aluminium alloy anodised and fixed complete all as specified and directed. |
| 14 | All as per item No 13 above but 75mm |
| 15 | Supply and fixing 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 16 | S&F 125mm aluminium extruded alloy handles fabricated type complete all as specified and directed. |
| 17 | All as per item No 16 above but 100mm |
| 18 | S&F 100 mm alumunium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 19 | All as per item No 18 above but 125mm |
| 20 | S&F 250 mm long aluminium alloy anodised, sliding door bolt with hasp ,staple(bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed. |
| 21 | S&F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 22 | Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each complete all as specified and directed. |
| 23 | S&F 3mm thick sheet glass, ordinary quality and glazing fixed with beading complete all as specified and directed. |
| 24 | S&F 5.5 mm thick ordinary quality ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each pane complete all as specified and directed. |
| 25 | S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 26 | All as per item No 25 above but fixed in repair |
| 27 | Supply and fixing in repairs Harrison rails 20 mm dia mild steel chromium plated curtain rail fixing with brackets stops complete all as specified and directed. |
| 28 | S&F Aluminium extruded body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 29 | S&F in repair Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws complete all as specified. |
| 30 | S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 31 | M&L fixed in repair 12mm thick prelaminated particle board, exterior grade , prelaminated both side with decorative choice lamination fixed to aluminium frame works and similar work complete all as specified and directed. |
| 32 | S&F in repair 18/19mm thick prelaminated particle board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber with lipping complete all as specified and directed. |
| 33 | S&F for mild steel work for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc complete all as specified and directed. |
| 34 | S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coatd and section of shutter 47x20mm, mulion section 72x50mm ( Based steel as per IS 513 \\"D\\" qualilty galvanised as per IS 277 with zinc of 120 gms/sqm) glazed and gauged or wire gauge shutter prepare to receive wire mesh to the shutter (double bars powder coated fixed to window frame with screws including necessary fitttings and all builders harware such as alldles, tower bolts and stays etc compelete all as specified and as directed. Note : Glass and wiremesh shall be measured and paid separately under respectibve tiems. |
| 35 | S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, sheets etc. complete, drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and directed. |
| 36 | M&L for preparation of new surfaces of wooden any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint over coat of primer complete all as specified and directed. |
| 37 | M&L for preparation of new steel surfaces in any description not other wise described over 10cm width or girth and applying two coat of synthetic enamel paint in any colours over coat of red oxide zinc chrome primer complete all as specified and directed. |
| 38 | Dismantling of plain or corrugated steel sheeting, any type and any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 39 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 40 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 41 | Supply and fixing anodised aluminium door shutters, aluminium section weighting 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 42 | Supply and fixing for anodised aluminium window and ventilator shutters with aluminium grill, side hund type without sash bars aluminium section weighing 0.55Kg/RM including necessary hointing cleats, glazing clips, rubber packing anodised aluminium snap beading, screws anodised aluminium fitting such as peg stay 150mm long (01no) hinges type B21, 100mm long (02 Nos) suitable handle (01 No) complete all as specified and directed. |
| 43 | Supply and fixing for anodised aluminium partition fixed type/with out sash bars aluminium section weighing 0.55kg/RM incl necessary jointing cleats, glazing clips rubber packing anodised aluminium snap beading, screw etc complete all as specified and directed. |
| 44 | Supply and fixing anodised aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and as directed. |
| 45 | Supply and fixing ordinary quality sheet glass 5 mm thick in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified n exc 0.5 sqm complete all as specified and directed. |
| 46 | S&Fsteel ventilator with top hung shutter including hinges,steel peg stay etc complete all as specified and directed. |
| 47 | Supply and fixing in repairs continuous (piano) hinges mild steel bright finish or electrogalvanised 30mm flaps complete all as specified and directed. |
| 48 | Supply and fixing for double action floor spring hydraulically regulated made ou of minium 1.25mm thick aluminium allooy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of MS heavy duty and fixed complete all as specified and directed. |
| 49 | Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 50 | M&L for rendering 10mm thick in CM 1:4 on concrete surfaces on roof finishing even and smooth without using extra cement and using water proofing complete all as specified and directed.Note :-WPC shall be measured & paid for separately. |
| 51 | Supply only water proofing compound complete all as specified and directed. |
| 52 | Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed. |
| 53 | Material and labour for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening preparatory to distempering on surfaces of walls. |
| 54 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm, single or double rebated, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 55 | S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain wiremesh/skelton door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately. |
| 56 | S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately. |
| 57 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 58 | Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and directed. |
| 59 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 60 | M&L for 15 mm thick rendering using ready mix plaster bags on brick / concrete surface of external/internal surfaces of walls finished fair and even, complete all as specified and directred. Make : Ultratech, Readyplast, Birla Acrocem & Trimurti. Note :- Contractor is required to deposite readymix bags for 100% CA quantity to Engr -in-Charge. |
| 61 | Supply only integral water proofing compound. |
| 62 | M&L for preparation of old treated plastered or concrete surfaces of wall and applying two coats of weather coat/exterior emulsion complete all as specified and directed. |
| 63 | Removing/cleaning of sand/silt, mud,etc under culvert and in the drain of any width and length in soft/loose soil including depositing of removed material from site at a distance exc 900 m and n exc 1000 m deposited where directed by Engr-in-Charge. |
| 64 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 65 | M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed. |
| 66 | M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate 40 mm thick finish by using extra cement as in flooring complete all as specified and directed. |
| 67 | Demolition of cement concrete of any description and in any position not otherwise specificially provided for |
| 68 | M & L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping/Benching incl necessary from work and finishing of exposed surface complete all as specified and directed. |
| 69 | Demolition of reinforced cement concrete of any descrption and in any position not otherwise specifically provided for complete all as specified and directed. |
| 70 | M&L for 35 mm thick precast ( 1:2:4 type B-0 using 12.50 mm gradded stone aggregate ) cement concree jalli including all mouldings set in cement mortar 1 :4 complete |
| 71 | Providing precast cement concrete (1:2:4 type B-1 with using 20mm graded stone agg) as in landings, cover slabs (for manholes etc). Chulah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed. |
| 72 | M & L mild steel TMT bars 8 mm to 10 mm dia cut to length bent to shape required incl cracking bending spirally, hooking and binding with & incl MS wire 0.9 mm dia etc complete all as specified and directed. |
| 73 | M&L for 75 mm thick cement concrete, 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in floors, paving etc, finishing the surface even and smooth with using extra cement and including use and waste of form work complete all as specified and directed. |
| 74 | M&L for 60 mm thick precast cement concrete coloured interlocking tiles of grade M-35 any shape and size confirming to IS 15658-2006 with grey cement and pigment in floors / pavements incl 30 mm thick sand cushioning complete all as specified and directed. |
| 75 | M&L for coloured Chequered cement concrete glazed/glossy finisjed tiles 300x300x25 mm thick, with white cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed. |
| 76 | Dismantling of mild steel work of any description including barbed wire complete all as specified and directed. |
| 77 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 78 | Dismantling posts or struts of angle iron any section, including taking out embedded portion in Concrete, brick work, masonry, etc, complete all as specified and directed. |
| 79 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 80 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in for fixing angle iron and coping including necessary form work, complete all as specified and directed. |
| 81 | S&F MS work as in post and strutt and fencing, drilled and countersunk for balusters running bars for doors balusters,noising to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts,posts and struts in fencing including cutting tops to shape as directed drilling hoes nothcing for wire etc flat iron fillets ( for securing wire mesh ) including all necessary drilling bolting or riveting etc. and similar work conforming to Fe - 290 Gde E - 165 complete all as specified and directed. |
| 82 | M&L for providing and fixing concentrina spiral coil fencing with punched tape concentrina coil 600 mm dia and 6 m max openable length, upto 3 m height of wall with angle iron Y shaped with 9 horizontal RBT reinforced barbed wire studied with GI staples and GI clips to retain horizontal incl necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of EIC, with reinforced barbed wire tape (RBT)/spring core (2.5 mm thick) wire of tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.47 gm/m including taking down of old unserviceable concertina coil complete all as specified and directed. |
| 83 | S&F in repair two strand galvanised steel barbed wire 2.24mm dia barbed with 2mm dia bars @ 75mm spaciang and fixed to any type started rails strained bolts incl securing or tying at closing with and provn of galvanised mild steel wire staples or steel pins, complete all as specified and directed. |
| 84 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed. |
| 85 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 86 | M&L in applying two coats of synthetic enamel paint over a coat of red oxide primer to new steel and iron surfaces over 10cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 87 | M&L for Precast cement concrete PCC 1:2:4 type B-1 block for road side curb stone as per sample approved by GE for road side curb stone and for laying and setting in CM 1:4 including demolition of old PCC curb stone complete all as specified and directed. |
| 88 | M&L for preparation of new or previously untreated plsatered or concrete surfaces and applying two coats of weather coat over a coat of primer complete all as specified and directed. |
| 89 | Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 90 | M&L for Glazed ceramic coloured/printed tiles in vertical surface of size 450x300x7-8mm thick as in skirting and dado set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 91 | Material and labour for non skid coloured ceramic dark tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm (400x400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cm 1:6 complete all as specified and as directed. Please Enable Macros to View BoQ information |
