|
| 1 | DETAILS ESTIMATE FOR CONSTRUCTION OF NEW PUMP HOUSE OF MAJHLIDANGA MAJOR RLI SCHEME UNDER HURA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION under PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. : Please see the details in Sheet PH (A) |
| 2 | DETAILS ESTIMATE FOR ELECTRICAL CONNECTION TO MOTOR & INTERNAL WIRING IN THE PUMP HOUSE OF MAJHLIDANGA MAJOR RLI SCHEME UNDER HURA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION under PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. : Please see the details in Sheet IW (B) Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: EXECUTIVE ENGINEER (AGRI-MECH)PURULIA (A-M) DIVISION Name of Work: DETAILS ESTIMATE FOR CONSTRUCTION OF NEW PUMP HOUSE OF MAJHLIDANGA MAJOR RLI SCHEME UNDER HURA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION under PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. Tender Reference No : WBWRDD/EEAM/PUR/eNIT-2( Sl No 1 to 5 )/NP/2026-27, (Sl No.- 3) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) SL No Description of Item Unit Qty. Rate Amount(Rs.) CONSTRUCTION OF NEW PUMP HOUSE OF MAJHLIDANGA MAJOR RLI SCHEME UNDER HURA BLOCK, DIST-PURULIA |
| 3 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 ma) In ground floor including roof. |
| 4 | Dismantling of R.C. floor, roof beam etc, including cutting rods and removing rubbish as directed within a lead of 75 m, including stacking of steel bars,a) In ground floor including roof. |
| 5 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils, within a lead of 75 m as directed.The item includes necessary trimming the sides of trenches, levelling,dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1500 mm. |
| 6 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidated the same by through saturation with water ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 7 | Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 8 | Ordinary Cement concrete (Mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(d) with local hard black stone verity chips (Pakur Variety) |
| 9 | Ordinary Cement concrete (Mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(d) with local hard black stone verity chips (Pakur Variety) |
| 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 metre using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm. to 30 mm. thick wooden shuttering. For PUMP HOUSE |
| 11 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor / upto 4m.(i) Tor steel/Mild Steel II. JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL |
| 12 | 250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)a) In foundation & plinth. b) In superstructure ground floor M3 16.28 4236.0 68962.08 68962.08 |
| 13 | (a) 125 mm. thick Flyash brick work as per IS 12894:2002 in cement mortar (1:4) in ground floor. |
| 14 | 25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone a gregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency] |
| 15 | Plaster (to wall, floor, ceiling etc.) with (1:6) sand and cement mortar including rounding off or chamfering corners, as directedand racking out joints or roughening of concrete surface including throating. Nosing and drip course as necessary at ground floor. (a) 15 mm thick (1:6) proportion. |
| 16 | Neat cement punning about 1.5 mm. thick in wall dado, floor, drain, door and window sill etc. complete. |
| 17 | Supplying, fitting, fixing approved quality asbestos cement quality down pipe in positin with necessary clamps, nails including making holes in wall, floor etc. and cutting trenches in any soil or through masonry, concrete structures etc. if necessary and mending good damages including jointing materials complete.(i) 76.2 mm Dia. |
| 18 | Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm. Including watering and ramming etc. layer by layer complete with earth obtained from excavation of foundation. |
| 19 | Supplying fitting approved type ventilator in position after cutting holes in walls, setting in cement mortar, mending damages to wall and plaster two coats of paint of approved brand sand shade. Payment of mending good damages of wall & plaster and painting to be mase seperately.b) RCC ventilator of 20 mm thick upto 0.10 sqm area. |
| 20 | (a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I.Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rollingshutter in the room, painting two coats of approved aluminium paintover a coat of red lead primer complete. |
| 21 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 22 | Priming one coat on steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 23 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white |
| 24 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.Two Coats 1. Total of Item No. 1 to 22 385135.55 367463.63 2. Extra @4% carriage on Item 4 to 22 except Item no. 16 14698.55 14698.5452 3. Sub Total (On Sl No.1+ On Sl.No.2) 399834.1 4. Add GST @ 18 % (On Sl No.3) 71970.14 5. Sub Total (On Sl No.3+ On Sl.No.4) 471804.24 6. Add Labour Cess @ 1 % (On Sl No. 5) 4718.04 7. Sub Total (On Sl No.5+On Sl.No.6+Sl No.7) 476522.28 Say Total 476522.0 Rupees Four Lakh Seventy Six Thousand Five Hundred & Twenty Two only Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: EXECUTIVE ENGINEER (AGRI-MECH)PURULIA (A-M) DIVISION Name of Work: DETAILS ESTIMATE FOR ELECTRICAL CONNECTION TO MOTOR & INTERNAL WIRING IN THE PUMP HOUSE OF MAJHLIDANGA MAJOR RLI SCHEME UNDER HURA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION under PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. Tender Reference No : WBWRDD/EEAM/PUR/eNIT-2( Sl No 1 to 5 )/NP/2026-27, (Sl No.- 3) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) SL No Description of Item Unit Qty. Rate Amount(Rs.) 1 φ Wiring ( For Lighting Load ) |
| 25 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection Lagrand Double Pole 32 A. |
| 26 | Wiring from MCB SS Enclosure to Busbar by the following size of 1.1KV grade single core stranded 'FR' PVC insulated and unsheathed copper wire (Brand Approved by EIC) in 25 mm PVC casing-capping (Precision make) including necessary PVC clips fittings etc. as required.b) 2X 22/0.3 (1.5 Sq mm) + 1 X 22/0.3(1.5 Sq mm) ECC |
| 27 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips fittings etc. to light/fan point with piano key type switch (Anchor Make ) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necessary connections and making earthing attachment and mending good damages to building works. [PVC casing capping and Switch board both on surface] (c) Avg Run 8 run meter |
| 28 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips fittings etc. with S & F 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on PVC switch board on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] (a) Onboard |
| 29 | Supplying and fixing of 6 -32 Amp Single Pole MCB on Switch Board as per direction of E.I.C. |
| 30 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. 3 φ Wiring ( Motor Wiring ) |
| 31 | Fixing only of 200 A, 415 V sheet steel TPN main switch on Angle iron Frame on wall. |
| 32 | Fixing only of 4 Bars 200 A, 415 V M.S. sheet metal busbar chamber on angle iron frame on wall . |
| 33 | Fixing only of 63 A, 415 V sheet steel TP main switch on Angle iron Frame on wall . |
| 34 | Fitting & fixing of Starter (Direct on Line or Star-Delta/Auto- Transformer) with Nuts & Bolts fixed on Angle iron frame on wall and making necessary connection with the electrical cables. iii) Star-Delta 1Auto-Transformer Starter (Above 15 HP upto 25 HP) |
| 35 | Meter loop connection with 1.1 K.V. Gr. 3½ core / 4 core 50 Sqmm P.V.C./ XLPE insulated & sheathed and armoured Aluminium Cable from Meter to incomming TPN Main Switch / Terminal. (Brand: Gloster/Havells/Finolex) d) For MAJOR RLI Schemei) 50 Sqmm 3% Core Aluminium Cable |
| 36 | Supplying and Drawing with 1.1 KV, PVC flexible 'FR' cables copper conductor conforming to IS 694 in suitable size with fitting and fixing on wall , including making necessary connection to the pre-fixed devices with all necessary accessories like saddle, screw, clips, gland, socket etc. conforming to IEE regulation and as per direction of EIC.(Brand: Gloster/Havells/Finolex). [a] For Major RLI (i) 4Cx 25 sqmm Copper cable conforming to IS 694 in [100/200 A TPN switch to Bus-bar] Meter 1.5 1561.53 2342.3 (ii) 3C X 16 sqmm copper cable conforming to IS 694 [Busbar to 63 A, TP Main switch and 63 A TP switch to Motor starter] Meter 5.0 793.96 3969.8 (iii) 2 X 3C X 10 sqmm copper cable conforming to IS 694 in 32 mm GI conduit (ISI-Medium quality)[ Star-Delta Motor starter to Motor] Meter 12.0 926.92 11123.04 |
| 37 | Suppling & fixing of EI danger Board 20 cm x 30 cm (8\\"x12\\") in two distinguishing position . As per IEE regulation. |
| 38 | Excavation of soil for installation of Earth Electrode and filling& ramming (b) For Morrum Soil |
| 39 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 40 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 41 | Earthing with 50 mm dia Galvanized iron pipe 3.64 mm thick X 3.04 mtr. long and 1X4 SWG G.I.(Hot Dip) Wire (4 mtr. Long ) 13 mm dia X 80 mm long G.I. Bolts, double nuts and double washer including S&F 15 mm dia G.I. Pipe protection (1 mtr) long to be fitted with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.56 mtr. below the ground level. a) By TATA-Medium G.I. Pipe. |
| 42 | (b) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 43 | Connecting the equipments to earth busbar including supplying and fixing G.I. (hot dip) Wire on wall/floor with stapples burried inside floor/wall as required and making connection to equipments with bolts, nuts, washers, cable, lugs etc. as required and mending good all the damages. (a) Solid GI wire(i) No. 4 SWG |
| 44 | Fitting, fixing of wooden pannel board of size 6'X4'X1\\" on M.S clamp on wall. |
| 45 | Supply of wooden pannel board of size 6ft. X 4 ft. X 1 inch. With 6 nos M.S. Clam for Pump House wall mounting (As per relevant IS Code) 1. Total of Item No. 1 to 21 38154.84 2. Add GST @ 18 % (On Sl No.1) 6867.87 3. Sub Total (On Sl No.1+ On Sl.No.2) 45022.71 4. Add Labour Cess @ 1 % (On Sl No. 3) 450.23 5. Sub Total (On Sl No.3+On Sl.No.4) 45472.94 Say Total 45473.0 Rupees Forty Five Thousand Four Hundred & Seventy Three only Please Enable Macros to View BoQ information |
