|
| 1 | DETAILS ESTIMATE FOR REPAIRING OF PUMP HOUSE OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION under PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. : Please see the details in Sheet PH (A) |
| 2 | DETAILS ESTIMATE FOR INTERNAL WIRING IN THE PUMP HOUSE OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION UNDER PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. : Please see the details in Sheet IW (B) |
| 3 | DETAILS ESTIMATE FOR REPAIRING AND MAINTENANCE OF WATER TRANSMISSION ARRANGEMENT OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB-DIVISION UNDER PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. : Please see the details in Sheet IW (B) Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: EXECUTIVE ENGINEER (AGRI-MECH)PURULIA (A-M) DIVISION Name of Work: DETAILS ESTIMATE FOR REPAIRING OF PUMP HOUSE OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION under PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. Tender Reference No : WBWRDD/EEAM/PUR/eNIT-2(Sl No.-01 - 05)/NP/2026-27, (Sl No.- 1) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) SL No Description of Item Unit Qty. Rate Amount(Rs.) REPAIRING OF PUMP HOUSE OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA BLOCK, DIST-PURULIA |
| 4 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 5 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 ma) In ground floor including roof. |
| 6 | Dismantling of all types of plain concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m, In ground floor including roof(a) upto 150 mm thick |
| 7 | Dismantling of R.C. floor, roof beam etc, including cutting rods and removing rubbish as directed within a lead of 75 m, including stacking of steel bars,a) In ground floor including roof. |
| 8 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.a) In ground floor including roof. |
| 9 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety |
| 10 | 250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)a) In foundation & plinth. b) In superstructure ground floor Cum 6.11 4236.0 25881.96 |
| 11 | Hire and labour charges for shuttering with centering and necessary staging upto 4 metre using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work |
| 12 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 13 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction (i) Tor steel/Mild Steel. II) JSW/JSPL/SHYAM/SRMB/BMASL/ ELECROSTEEL/SSL |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster |
| 15 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 16 | Supplying fitting approved type ventilator in position after cutting holes in walls, setting in cement mortar, mending damages to wall and plaster two coats of paint of approved brand sand shade. Payment of mending good damages of wall & plaster and painting to be mase seperately.b) RCC ventilator of 20 mm thick upto 0.10 sqm area |
| 17 | a) Supplying, fitting and fixing steel rolling shutterprofile type with 18 B.G . of approved type steel latchesection 75mm wide, fitted with coil wire spring tonecessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete withlocking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primercomplete. |
| 18 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 19 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 20 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 21 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc on the surface, if necessary. (b) On steel or other metal surface :(iv) Two coats (with any shade except white)(b) On steel surface (Normal gloss).(iv)Two coats (with any shade except white). |
| 22 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: b) Two Coats |
| 23 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion. 1. Total of Item No. 1 to 22 179131.43 2. Extra @4% carriage on Item 6 to 20. 6566.51 3. Sub Total (On Sl No.1+ On Sl.No.2) 185697.94 4. Add GST @ 18 % (On Sl No.3) 33425.63 5. Sub Total (On Sl No.3+ On Sl.No.4) 219123.57 6. Add Labour Cess @ 1 % (On Sl No. 5) 2191.24 7. Sub Total (On Sl No.5+On Sl.No.6+Sl No.7) 221314.81 Say Total 221315.0 Rupees Two Lakh Twenty One Thousand Three Hundred & Fifteen only Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: EXECUTIVE ENGINEER (AGRI-MECH)PURULIA (A-M) DIVISION Name of Work: DETAILS ESTIMATE FOR INTERNAL WIRING IN THE PUMP HOUSE OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB- DIVISION UNDER PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. Tender Reference No : WBWRDD/EEAM/PUR/eNIT-2(Sl No.-01 - 05)/NP/2026-27, (Sl No.- 1) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) SL No Description of Item Unit Qty. Rate Amount(Rs.) 1 φ Wiring ( For Lighting Load ) |
| 24 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2 Way |
| 25 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection Lagrand Double Pole 32 A. |
| 26 | Wiring from MCB SS Enclosure to Busbar by the following size of 1.1KV grade single core stranded 'FR' PVC insulated and unsheathed copper wire (Brand Approved by EIC) in 25 mm PVC casing-capping (Precision make) including necessary PVC clips fittings etc. as required.b) 2X 22/0.3 (1.5 Sq mm) + 1 X 22/0.3(1.5 Sq mm) ECC |
| 27 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips fittings etc. to light/fan point with piano key type switch (Anchor Make ) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necessary connections and making earthing attachment and mending good damages to building works. [PVC casing capping and Switch board both on surface] (c) Avg Run 8 run meter |
| 28 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips fittings etc. with S & F 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on PVC switch board on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] (a) Onboard |
| 29 | Supplying and fixing of 6 -32 Amp Single Pole MCB on Switch Board as per direction of E.I.C. |
| 30 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. |
| 31 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set. 3 φ Wiring ( Motor Wiring ) |
| 32 | Fixing only of 200 A, 415 V sheet steel TPN main switch on Angle iron Frame on wall. |
| 33 | Fixing only of 4 Bars 200 A, 415 V M.S. sheet metal busbar chamber on angle iron frame on wall . |
| 34 | Fixing only of 63 A, 415 V sheet steel TP main switch on Angle iron Frame on wall . |
| 35 | Fitting & fixing of Starter (Direct on Line or Star-Delta/Auto- Transformer) with Nuts & Bolts fixed on Angle iron frame on wall and making necessary connection with the electrical cables. iii) Star-Delta 1Auto-Transformer Starter (Above 15 HP upto 25 HP) |
| 36 | Fixing only Voltmeter/Ammeter with screws & other fixing materials incl.making necessary holes and connections. |
| 37 | Fixing and connection Capacitor bank with suitable cable and others necessary materials to the system on a suitable place as per direction of E.I.C. |
| 38 | Meter loop connection with 1.1 K.V. Gr. 3½ core / 4 core 50 Sqmm P.V.C./ XLPE insulated & sheathed and armoured Aluminium Cable from Meter to incomming TPN Main Switch / Terminal. (Brand: Gloster/Havells/Finolex) d) For MAJOR RLI Schemei) 50 Sqmm 3% Core Aluminium Cable |
| 39 | Supplying and Drawing with 1.1 KV, PVC flexible 'FR' cables copper conductor conforming to IS 694 in suitable size with fitting and fixing on wall , including making necessary connection to the pre-fixed devices with all necessary accessories like saddle, screw, clips, gland, socket etc. conforming to IEE regulation and as per direction of EIC.(Brand: Gloster/Havells/Finolex). [a] For Major RLI (i) 4Cx 25 sqmm Copper cable conforming to IS 694 in [100/200 A TPN switch to Bus-bar] Meter 1.5 1561.53 2342.3 (ii) 3C X 16 sqmm copper cable conforming to IS 694 [Busbar to 63 A, TP Main switch and 63 A TP switch to Motor starter] Meter 3.0 793.96 2381.88 (iii) 2 X 3C X 10 sqmm copper cable conforming to IS 694 in 32 mm GI conduit (ISI-Medium quality)[ Star-Delta Motor starter to Motor] Meter 14.0 926.92 12976.88 |
| 40 | Supplying & fixing of EI danger Board 20 cm x 30 cm (8\\"x12\\") in two distinguishing position . As per IEE regulation. |
| 41 | Suppling fitting & fixing of shock treatment chart in a wooden frame. |
| 42 | Excavation of soil for installation of Earth Electrode and filling& ramming (b) For Morrum Soil |
| 43 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 44 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 45 | Earthing with 50 mm dia Galvanized iron pipe 3.64 mm thick X 3.04 mtr. long and 1X4 SWG G.I.(Hot Dip) Wire (4 mtr. Long ) 13 mm dia X 80 mm long G.I. Bolts, double nuts and double washer including S&F 15 mm dia G.I. Pipe protection (1 mtr) long to be fitted with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.56 mtr. below the ground level. a) By TATA-Medium G.I. Pipe. |
| 46 | (b) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 47 | Connecting the equipments to earth busbar including supplying and fixing G.I. (hot dip) Wire on wall/floor with stapples burried inside floor/wall as required and making connection to equipments with bolts, nuts, washers, cable, lugs etc. as required and mending good all the damages. (a) Solid GI wire(i) No. 4 SWG |
| 48 | Insulation testing of internal wiring of Pump House/Kiosk Boxincluding wiring of electric Motor & other ancilary equipments by means of Megger . |
| 49 | Placing and positioning the Centrifugal pump motor set on the pump base/pump house floor, alligning properly with necessary packing and fixing the set with holding down nuts and washer including cutting holes of requisite size in the floor / base, grouting the bolts and mending good all damages- complete as per direction of Engineer-in-Charge. (iii) 20 H.P. Capacity |
| 50 | Supply & fixing of Single Phase Preventer with auto switch and timmer |
| 51 | Fitting, fixing of wooden pannel board of size 6'X4'X1\\" on M.S clamp on wall. |
| 52 | a) Transportation of Diesel Engine pumping set / Electro-Motor pumping set for Major R.LI. of any make/brand with necessary fixtures viz. M.S. bend, M.S. Pipes, Rubber Hose Pipe, Manifold, Surge tank, foot valve, non-return valve, tail piece, hose clamp, sluice valve, priming chamber etc. over Pucca/Kancha road from Sub-Divisional Store to worksite. B. For Electro Motor (a) Carriage by Road: (i) Distance upto 50 km. |
| 53 | Loading of Electro Motor pumping set of any make of 200 cubic metres per hour (m3/hr) capacity with necessary accessories and fixtures viz. M.S. Bend, M.S. Pipes, Rubber Hose, Manifold, Surge Tank, Foot Valve, non-return valve, sluice valve etc. by any means into the following transport at lifting point having a lead of 100 metre and unloading the same at distination and stacking the same properly at a distance of about 100 metre complete as per direction ofEngineer-in-Charge.(i) Truck 1. Total of Item No. 1 to 21 43181.3 2. Add GST @ 18 % (On Sl No.1) 7772.63 3. Sub Total (On Sl No.1+ On Sl.No.2) 50953.93 4. Add Labour Cess @ 1 % (On Sl No. 3) 509.54 5. Sub Total (On Sl No.3+On Sl.No.4) 51463.47 Say Total 51463.0 Rupees Fifty One Thousand Four Hundred & Sixty Three only Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: EXECUTIVE ENGINEER (AGRI-MECH)PURULIA (A-M) DIVISION Name of Work: DETAILS ESTIMATE FOR REPAIRING AND MAINTENANCE OF WATER TRANSMISSION ARRANGEMENT OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA DEVELOPMENT BLOCK UNDER PURULIA-I (A-M) SUB-DIVISION UNDER PURULIA (A-M) DIVISION, PURULIA FOR THE F.Y. 2026-27. Tender Reference No : WBWRDD/EEAM/PUR/eNIT-2(Sl No.-01 - 05)/NP/2026-27, (Sl No.- 1) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) SL No Description of Item Unit Qty. Rate Amount(Rs.) REPAIRING AND MAINTENANCE OF WTA OF HARMADIH MAJOR RLI SCHEME UNDER NETURIA BLOCK, DIST-PURULIA. |
| 54 | Earth work in excavation of field trenches as per design section and alignment for laying of pipe lines (PVC, RCC, ACP etc.) upto a depth of 1500 mm all sorts of soils including removing, spreading or stacking extra earth as directed. The item includes necessary trimming of sides trenches, levelling, dressing and ramming the bottom as required complete. |
| 55 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils, withing a lead of 75 m as directed.The item includs necessary trimming the sides of trenches, leveling, dressing and ramming the bottoms, bailing out water as required complete. (a)Depth of excavation not exceeding 1500mm. |
| 56 | Laying of PVC pipes of different diameters within field trenches in curve/ straight line including using UPVC fittings, Viz. Horizontal and Vertical Bends, riser pipes, Tee Reducer etc.and making leak proof joints with couplers after roghening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipesfittigs and solvent cement to be supplied by deptt.) all complete asper direction of Engineer-In- charge. ii)200 mm pipe M 360.0 10.84 3902.4 (iii) 140 mm dia. M 210.0 10.14 2129.4 |
| 57 | Earth work in filling in trenches after laying pipe lines (PVC, RCC, ACP etc.) with good earth obtained from excavation of field trenches in layers not exceeding 225 mm, including watering and ramming etc. layer by layer complete. (Payment will be made on the basis of measurement of finished .quantity of work.) |
| 58 | Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 59 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidated the same by through saturation with water ramming complete including the cost of supply of sand. (B) Do - by fine sand |
| 60 | 250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6), (a) In foundation and plinth. |
| 61 | (a) 125 mm. thick Flyash brick work as per IS 12894:2002 in cement mortar (1:4) in ground floor. |
| 62 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety |
| 63 | Hire and labour charges for shuttering with centering and necessary staging upto 4 metre using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work |
| 64 | Labour charges for fitting and fixing 150 mm. dia Alfa-Alfa valve with 160 mm. dia class-II U.P.V.C riser pipe with the help of flanged P.V.C tail piece by joining the P.V.C end of Tail piece and riser pipe with coupler and flanged end of tail piece and flap valve with rubber insertion , nuts and bolts etc. complete (Rate inclusive of transportation from departmental store to work site) |
| 65 | Labour Charges for fitting, fixing and laying, where necessary of following M.S / G.I. / E.R.W. pipes and accessories (to be supplied departmentally) including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge.(xxviii) 150 mm dia sluice Valve (xxvi) 300 mm. dia. ERW pipe special bend, both ends flanged. Each 1.0 121.64 121.64 |
| 66 | Labour charge for replacement of damage PVC. Pipe of any length in the Pipe line of HDTW / MDTW / RLI with new piece/s of pipe after taking out the damage pipe/s from the existing pipe line by cutting with hacksaw and joining the new pipe/s with the existing pipe line using necessary couplers after roughening up surface with wire brush, emery paper and applying the solvent cement (cost inclusive) to make the joint leakproof (pipe & couplers to be supplied departmentally) including transporting departmentally issued pipe/s, couplers etc. from Sub-Divisional Store to the Site all complete as per direction of Engineer-in-Charge.(ii)200 mm. dia. PVC. Pipe iv) 140 mm. dia. PVC. Pipe Each set of replacement 10.0 199.91 1999.1 |
| 67 | Repair of puncture/holes of any size in existing PVC. Pipeline of HDTW/MDTW/RLI by placing half round PVC. Pipe section of required size to cover the holes puncture having adequate bearing on all sides and joining the half round section with solvent cement after roughening the surface with wire brush, emery paper to make the joint leak proof as per direction of Engineer-in Charge (cost inclusive of supplying solvent cement at site and transportation of required length of PVC.Pipe to be issued departmentlly, for cutting half round section, from Sub-Divisional Stores to site)iii)140 mm dia. PVC. Pipe line ii) 200 mm dia. PVC. Pipe line Each joint 4.0 83.92 335.68 |
| 68 | Labour charges for fitting, fixing (150 x 200) mm dia M S expander with 200 mm dia UPVC pipe with the help of FTP (flanged tail piece) by joining the PVC end of the tail piece and 200 mm dia UPVC pipe with coupler and flanged end of tail piece and expander with rubber insertion, nuts and bolts etc complete.(Rate inclusive of transportation from departmental store to work site.) |
| 69 | Supplying, fitting and fixing including transportation of sign board for identifing the exact location of Major RLI scheme ( one at rode side and other at site) the board will be made 3 mm thick MS plate of 300 mm X 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-I) including cutting, welding and writting of both sides of Sign board. Base - Yellow, and ward - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soilng. This will include one materials and labour complite as per drawing and direction of EIC. |
| 70 | Testing of pipe line system against leakages by filling the distribution chamber with water and supplying water through the entire pipe line net work for at least 4 (four) hour by running the departmental Diesel Engine pumping set/ Electro-Motor pumping set, including supplying necessary fuels & lubricants and hiring and transporting tools and plants all complete as per direction of Engineer-in-Charge. i) For Major R.L.I. |
| 71 | Installation / Erection of SurgeTank / Shore manifold (to be supplied from Deptt. free of cost) over a rigid base of ordinary cement concrete (1:2:4) with graded stone chips (20mm. nominal size) of pakur varity of 1250 mm X 1250 mm X 150 mm. over a single layer of brick flat soling and embedding the legs of the surge tank/shore manifold within the concrete base including cost of all materials and labour and as per direction of Engineer-in-Charge. |
| 72 | N.B. For Water transmission Arrangement of RLI I Tube well 4% extra over the schedule rates, save & except for earth work in excavation & filling works, will be allowed for extra carriage by cart I boat I head load besides initial transport by truck etc. (Except Item no. 1,2 & 4) 1. Total of Item No. 1 to 19 239340.97 2. Add GST @ 18 % (On Sl No.1) 43081.37 3. Sub Total (On Sl No.1+ On Sl.No.2) 282422.34 4. Add Labour Cess @ 1 % (On Sl No. 3) 2824.22 5. Sub Total (On Sl.No.3+Sl No.4) 285246.56 Say Total 285247.0 Rupees Two Lakh Eighty Five Thousand Two Hundred & Forty Seven only Please Enable Macros to View BoQ information |
