|
| 1 | Items to be executed bellow are inclusive of Providing Design & Drawing of R.E. Wall(vatted by IIT/NIT), Earth work, PCC leveling pad, Casting & Erection Assembling & Joining of panel, Synthetic Geogrid. Filing of Flyash & Filter Media with Compaction, cost of galbnized m.s. bars also including defect liabilities of works mentioned below for 2 Years. |
| 2 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. Complete as per drawings and Technical Specifications Morth Clause 2.5 (202) |
| 3 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Complete as per drawings and Technical Specifications Clause 12.1 (304). |
| 4 | Construction of a narrow filter sub-surface drain consisting of porous or perforated pipe laid in narrow trench surrounded by a geotextile filter fabric, with a minimum of 450 mm overlap of fabric and installed as per clause 702.3 and 309.3.5 including excavation and backfilling. Complete as per drawings and Technical Specifications Clause 7.1 (702). |
| 5 | Construction of sub surface drain 200 mm dia using geotextiles treated with carbon black with physical properties as given in clause 702.2.3 formed into a stable network and a planar geocomposite structure, joints wrapped with geotextile to prevent ingress of soil, all as per clause 702 and approved drawings including excavation and backfilling. Complete as per drawings and Technical Specifications Clause 7.1 (702). |
| 6 | Facing elements of RCC. Complete as per drawings and Technical Specifications Clause 7.4 (3105). |
| 7 | Providing assembling and joining and laying of reinforcing elements of synthetic geogrid in R.E. Wall. Complete as per drawings and Technical Specifications Clause 7.4 (3103-B). |
| 8 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. Complete as per drawings and Technical Specifications Clause 12.8 (1500, 1700 & 2100) in levelling pad and under friction slab M15. |
| 9 | Providing and laying of Geo Composite Drainage Sheet. Complete as per drawings and Technical Specifications Clause. |
| 10 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. Friction Slab M-35 Height above 10m. Complete as per drawings and Technical Specifications Clause 13.5 H |
| 11 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. R.C.C. R.E. Wall Capping M-35. Complete as per drawings and Technical Specifications Clause 13.5 H |
| 12 | Construction of embankment with approved Fly ash with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. Complete as per Drawing and Technical Specifications Morth Clause 3.16 (305). Adding Qty of Filter Media (388.12 + 3781.63) = 4169.75 |
| 13 | Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH-33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified. Complete as per drawings and Technical Specifications Clause 14.1 F-ii (q) |
| 14 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. Complete as per Drawing and Technical Specifications Morth Clause 4.1 (401) |
| 15 | Note: Cement and steel will be provided by UPSBCL and there amount has been deducted from analysis. Please Enable Macros to View BoQ information |
