|
| 1 | Works |
| 2 | Providing and applying exterior texture of approved shed and pattern rates are inclusive of one coat of white cement base putty, two coats of importade Archi/rustic texture Concrete material and asian paint base colour with required coats of asian texture paint rates are including scaffolding, all materials, labours and for any height. as directed by Engineer-in-Charge. |
| 3 | Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar |
| 4 | Removing and scraping of old deteriorated plaster of any thickness fromm wall I R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work. with all lead and lift |
| 5 | Providing and laying ordinary cement concrete 1:1/2:3 (1 Cement 1/2- coarse sand : 3-graded stone aggregates 20mm nominal size) and finishing smooth with,curing etc.complete including the cost of formwork but excludingthe cost of reinforcement for R.C.C work in (A) BEAMS:(ii) Having cross-sectional area more than 0.08Sq.M andupto 0.12 Sq.M |
| 6 | Providing and laying cement concrete 1:1/2:3 (1- Cement : 1/2- Coarse sand : 3- crushed stone aggregates 20 mm nominal size) and curing complete including cost offormwork in (A) Wall Caps / Coping |
| 7 | Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. |
| 8 | Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes (A) 10mm to 16mm dia bar |
| 9 | 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3sand) and 8mm thick finishing coat of C.M. 1:1 (1- cement : 1-sand) etc. complete. |
| 10 | Providing and fixing Concertina with punched tape concertina coil 600 mm dia 10meter openable length(total length 90m) having 50 nos rounds per 6 meters length, upto 3 m height of wall with existing angle iron \\"Y\\" shaped placed 2.4 m or 3.0 m apart and with 9 horizontal R Bt reinforced barbed wire, stud tied with G I staples & G I clips to retain horizontal, including necessary bolts or G I barbed wire tied to angle iron, all complete as per direction of Engineer-in- charge, with reinforced barbed tape (R B T) Spring core (2.5 mm thick) wire of high tensile strength of 165kg/ sq.mm with tape(0/52 mm thick) and weight 43.478 gm/metre(cost of M S angle, CC block shall be paid separately.) |
| 11 | Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame around, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. |
| 12 | Applying priming coat over new steel and other metal surface after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. |
| 13 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter. |
| 14 | Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) including One Coat of Priming to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. Etc complete. Please Enable Macros to View BoQ information |
