|
| 1 | Attending complaints related to plumbing / water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts /unions / sockets / PVC connection etc. and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed. |
| 2 | S&F in repairs PVC syphon kit, complete all as specified and directed. |
| 3 | S&F in repairs 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic bal screwed for iron pipe (minimum weight 142 gms), complete all as specified and directed. |
| 4 | S&F in repairs 32 / 40mm bore CP waste coupling (half or full threaded) for discharge pipe (minimum weight 45gms) complete all as specified and directed. |
| 5 | S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed. |
| 6 | S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed. |
| 7 | S&F in repairs 100mm dia CP grating doom, complete all as specified and directed. |
| 8 | S&F in repairs 125mm dia CP grating doom with waste hole, complete all as specified and directed. |
| 9 | S&F in repairs 125mm shower rose cast copper alloy, chromium plated with swivel joints, fancy type with CP neck 9\\" long made to shape, complete all as specified and directed. |
| 10 | S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.5m fitted in the existing water connection in the toilets, complete all as specified and directed. |
| 11 | S&F in repairs CP Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed. |
| 12 | S&F in repairs brass chromium plated tubular towel rail 20mm dia \\"D\\" type 60cm long between flanges, complete all as specified and directed. |
| 13 | S&F in repairs stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed. |
| 14 | S&F in repairs plastic water closet seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed. |
| 15 | S&F in repairs PVC cover for water storage tank of any capacity, complete all as specified and directed. |
| 16 | S&F in repairs brass spindle of full or half turn for taps/ stop cocks/ pillar taps/ CP mixer etc, complete all as specified and directed. |
| 17 | S&F in repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms), complete all as specified and directed. |
| 18 | S&F in repairs 15mm bore stop / angle valve of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms), complete all as specified and directed. |
| 19 | S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 20 | S&F in repairs 15mm bore pillar tap, cast copper alloy quarter turn, chromium plated, fancy type, CP screwed down high pressure, complete all as specified and directed. |
| 21 | S&F in repairs 15mm dia Angle valve, cast copper alloy, chromium plated screwed down, high pressure screwed both ends for iron pipe or for union and fixed, complete all as specified and directed. |
| 22 | S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed. |
| 23 | S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 24 | S&F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 25 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. |
| 26 | S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed. |
| 27 | S&F in repairs vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flangedend bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed. |
| 28 | S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed. |
| 29 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed. |
| 30 | S&F for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, including taking down of existing 15 mm pipe complete all as specified and directed. |
| 31 | S&F for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required including taking down of existing , complete all as specified and directed. |
| 32 | M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. |
| 33 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 34 | Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity upto 500 litres and refixing the float valve and plugging wash pipe, complete all as specified and directed. |
| 35 | Cleaning and removing all scales and dirt etc. from tanks and from mouths of circulating pipes of capacity exc 500 litres but n exc 1000 litres and refixing the float valve and plugging wash pipe, complete all as specified and directed. |
| 36 | Attending complaints related to carpenter work and obtaining completion from user including repair / easing of doors re-fixing or tightening of doors, windows, resecuring of door / window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, complete all as specified and directed. |
| 37 | S&F in repairs looking mirror of size 600x450mm with PVC moulding, complete all as specified and directed. |
| 38 | S&F in repairs 300mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames, complete all as specified and directed. |
| 39 | S&F in repairs aluminium (die cast body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg, complete all as specified and directed. |
| 40 | S&F in repairs 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 41 | S&F in repairs 100mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 42 | S&F in repairs 150mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 43 | S&F in repairs 100mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 44 | S&F in repairs 100mm long floor door stopper of aluminium alloy body and tongue with rubber cover ends, complete all as specified and directed. |
| 45 | S&F in repairs 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. |
| 46 | S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed. |
| 47 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm including hacking old glass, complete all as specified and directed. |
| 48 | SF in repairs 6mm thick Non asbestos fibre cement building board fixed or laid/inserted to timber / GI / Aluminium framework with screws to ceiling flat or sloping, fixed in repair and applying two coats of white wash, complete all as specified and directed. |
| 49 | S&F in repairs 100mm long hasp and staple, safety type, brass aluminium anodized with mild steel hinge pin including bolt to hinge plote and fixed with screw, complete all as specified and directed. |
| 50 | S&F in repairs 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed. |
| 51 | Taking down aluminium door / window shutter of any size n exc 2.5 Sqm each and refixing in the same position / opening after easing and adjusting, tightening of joints or changes of hinges, screws, cleats, beadings, rubber gasket etc, as per site requirement to make functional the shutter, complete all as specified and directed. |
| 52 | Taking down and refixing of shutters in same opening after easing and adjusting of any description exc 1 Sqm and n exc 2 Sqm each including resecuring / changing of builders hardware, complete all as specified and directed. |
| 53 | M&L for repair of leakage / seepage from the Nahani trap / floor trap of kitchen / bathroom / wash basin of the Qtr, in any position at any height, complete including change of floor trap, pipes embeded in floor, seal all joints of u/g pipes, making good the floor / walls matching with existing floor / walls, complete all as specified and directed. |
| 54 | M&L for 100 mm wide strong silicone sealant tape suitable for roof leak hole, metal leak, gap filling etc. hole size n exc 5x5mm including necessary fitting and scaffolding height upto 15m, complete all as specified and directed. |
| 55 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. |
| 56 | S&F in repairs Kitchen plate rack made of stainless steel 1mm thick with plugs washers as overall size of 75cm x 75cm including fixing to wall and all accessories, complete all as specified and directed. |
| 57 | Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed. |
| 58 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 59 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. |
| 60 | S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 61 | S&F 30mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. |
| 62 | S&F 35mm thick 2nd class softwood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers, complete all as specified and directed. |
| 63 | Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 65 | M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. |
| 66 | S&F in repairs 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed. |
| 67 | S&F in repairs 0.63mm thick Galvanised, Plain mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating, complete all as specified and directed. |
| 68 | Preparing new zinc (or galvanised) surfaces to receive painting of any description over 10cm width or girth, by coating with mordant solution including washing and cleaning, etc. steel and iron surfaces and applying two coats of synthetic enamel paint in camouflaging CCD pattern as approved, complete all as specified and directed. |
| 69 | S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 12mm thick perforated particle board for insulation and accoustics purposes , 60 cmx 60 cm size as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes including dismantling of existing ceiling, complete all as specified and directed. |
| 70 | M&L for 15mm thick rendering on fair faces on brick or concrete surfaces in CM 1:4, fair finished the surfaces even and smooth without using extra cement but with using water proofing compound including taking down cement plaster including scaffolding upto 12m height, complete all as specified and directed. (WPC shall be measured and paid separately) |
| 71 | Supply only integral water proofing compound, complete all as specified and directed. |
| 72 | M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including taking down old existing plaster including scaffolding upto 12m height, complete all as specified and as directed. |
| 73 | Preparation of new surface of wall and applying two coats of cement based paint over one coat of primer including scaffolding up to 15m height, complete all as specified and directed. |
| 74 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting, on plastered surface preparatory to distempering , complete all as specified and directed. |
| 75 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 76 | Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level), complete all as specified and directed. |
| 77 | M&L for 25mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 78 | M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 79 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and direction. |
| 80 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 81 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 82 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 83 | M&L for Glazed ceramic tile 450x 300 x 06-7mm thick (coloured) on vertical surfaces such as wall, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 84 | M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 85 | M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed. |
| 86 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed. |
| 87 | M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms with gas pipe hole, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed. |
| 88 | M&L for 20-25mm thick Machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 89 | M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 15mm thick backing coat in CM 1:6, complete all as specified and directed. |
| 90 | Preparation of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying one coat of distemper oil emulsion paint (OBD), complete all as specified and directed |
| 91 | Preparation of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying two coats of distemper oil emulsion paint (OBD), complete all as specified and directed |
| 92 | Preparation of old plastered or unplastered wall surfaces and applying two coats of white wash, complete all as specified and directed. |
| 93 | Preparation of old plastered or unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed. |
| 94 | Preparation of old painted steel & iron surfaces of any description over 10cm width or girth and applying One coat synthetic enamel paint, complete all as specified and directed. |
| 95 | Preparation of old painted wood surfaces and wood based materials of any description over 10cm width or girth and applying one coat synthetic enamel paint, complete all as specified and directed. |
| 96 | Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 65,320.00 during AOC.(Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
