|
| 1 | Bed plywood top FD-245 & 246S&F new components comprising of following outer member made of shisham wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unservicable one all as specified and as directed.(a) Head board |
| 2 | (b) Foot board |
| 3 | (c ) S & F new teak plywood of head board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed. |
| 4 | (d ) S & F new teak plywood of foot board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed. |
| 5 | (e )S&F new Long rail of size 90 x 35 mm made of 1st class Hard teak wood of appropriate size including dismantling unservicable one all as specified and as directed. |
| 6 | (f) Stiffner of size 60 x 40 mm |
| 7 | (g) Wooden bracket (corner) |
| 8 | (h) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screws including dismantling unservicable one all as specified and as directed.Make of Ply : Archidply/century/Greenply. |
| 9 | (j) preparation of the surfaces by throughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with french polish two coats to obtain a glossy finish complete all as specified and as directed. |
| 10 | Table 900 x 600 mm with/ without drawer FD- 223 & 224S&F new components of 1st class HW (Teak/shisham) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 11 | (b) Top rail (long/front) |
| 12 | (c) Top rail (short/side) |
| 13 | (d) Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed. |
| 14 | (e) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board including provision of knob completed all as specified and directed. |
| 15 | (f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 16 | Chair Dining FD-1105/279S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(a) Rear leg |
| 17 | (b) Front leg |
| 18 | (c) Rear/front/side rail |
| 19 | (d) Stiffener |
| 20 | (e) Back rest |
| 21 | (f) Tightening of all parts/joints of whole chair dining . |
| 22 | (g) Removing of unserviceable cane seat by replacing with wooden bottom of 12 MM thick plywood BWR duly fixed with 75 mm thick 32 density foam cushion covered with approved quality of tapestry cloth as directed by Engr-in-Charge/GE. |
| 23 | (h) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs after removing old buffers all as specified and directed. |
| 24 | Chair dining cushioned FD/E6/MAP/10 (R)S&F new components of 1st class HW (teak/shisham) including dismantling unservicable one all as specified and as directed.(a) Rear leg |
| 25 | (b) Front leg |
| 26 | (c) Side/back/front rails |
| 27 | (d) Stiffener |
| 28 | (e) Providing new 75mm Cushion with new tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office.Cost of tapestry cloth shall not be less than Rs 400/-per meter |
| 29 | (f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one. Cost of tapestry cloth shall not be less than Rs 400/- per meter. |
| 30 | (g)Tightening of all parts/joints of whole Chair dining cushioned with bamboo pins. |
| 31 | (h) Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. |
| 32 | Chair Easy FD-1108/229S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(a) Rear leg |
| 33 | (b) Front leg |
| 34 | (c) Arms |
| 35 | (d) Front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and directed |
| 36 | (e) Tightening of all parts/joints of whole chair easy. |
| 37 | (f) Removing of unserviceable cane from seat & back by replacing with wooden bottom of 12 MM thick plywood BWR duly fixed with 50 mm thick 32 density foam cushion covered with approved quality of tapestry cloth as directed by Engr-in-Charge/GE. |
| 38 | (g) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified & directed. |
| 39 | Chair writing FD-202/ 250/280S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(a) Rear leg |
| 40 | (b) Front leg |
| 41 | (c) Rear/front/Side rail |
| 42 | (d) Arms. |
| 43 | (e) Back rest |
| 44 | (f) Stiffener |
| 45 | (g) Tightening of all parts/joints of whole chair dining |
| 46 | (h) Removing of unserviceable cane seat by replacing with wooden bottom of 12 MM thick plywood BWR duly fixed with 75 mm thick 32 density foam cushion covered with approved quality of tapestry cloth as directed by Engr-in-Charge/GE. |
| 47 | (j) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed. |
| 48 | Table writing FD-249 & 275(a) Top made out of 18 mm thick pre-laminated particle board of approved shade duly providing 4 mm thick teak wood beading all around including dismantling unserviceable one |
| 49 | S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(b) Leg(long) |
| 50 | (c) Leg (short) |
| 51 | (d) Side/bottom rail |
| 52 | (e) Wooden bracket size 100x100mm |
| 53 | (f) Back made out of 6 mm thick plywood commercial including dismantling unserviceable one all as specified and as directed. |
| 54 | (g) Side made out of 18 mm thick Pre-laminated MDF board one side laminated finish including dismantling unserviceable one all as specified and as |
| 55 | (h) Stiffner (long) |
| 56 | (j) Drawer made out of 18 mm thick particle board for front and 12 mm thick for back/side including provision of knob and locking facility including dismantling unserviceable one all as specified and as directed.Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality |
| 57 | (k) Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated particle board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed.Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (b) Hinges shall be 50 mm of approved quality. |
| 58 | (k) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 59 | Table dining for 06 persons FD-30(M)/ 273 & 239 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(a) Leg |
| 60 | (b) Top rail (long/front) |
| 61 | (c) Top rail (short/side) |
| 62 | (d) wooden bracket size 100x100mm (corner) |
| 63 | (e) Top 18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed. |
| 64 | (f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 65 | Teapoy FD-382/ 232 & 278S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(a) Leg |
| 66 | (b) Top rail (long/front) |
| 67 | (c) Top rail (short/side) |
| 68 | (d) Stiffener |
| 69 | (e) Wooden bracket size 50x50mm |
| 70 | (f) Top 18mm thick pre-laminated particle board of approved shade alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed. |
| 71 | (g) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 72 | Table centre FD-274 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(a) Leg |
| 73 | (b) Top rail (long/front) |
| 74 | (c) Top rail (short/side) |
| 75 | (d) Stiffener |
| 76 | (e) Top18mm thick pre-laminated particle board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed. |
| 77 | (f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 78 | Table Peg FD- 277 & 236/384S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed.(a) Leg |
| 79 | (b) Top rail (long/front) |
| 80 | (c) Top rail (short/side) |
| 81 | (d) Stiffener |
| 82 | (e) Top18mm thick pre-laminated particle board of approved shade alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed. |
| 83 | (f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 84 | Sofa sets 5 seater/4 seater/ 2seater/ single seater FD-281S&F New components of 1st class HW (Teak/ shisham) including dismantling unservicable one all as specified and as directed.(a) Front Legs |
| 85 | (b) Rear legs |
| 86 | (c) Battens |
| 87 | (d) back rail (3 seater) |
| 88 | (e) Front rail (3 seater) |
| 89 | (f) Back rail (single seater) |
| 90 | (g) Front rail (single seater) |
| 91 | (h) Hand rest |
| 92 | (j) Providing new M & L cushion of 40 density cool foam of size 560 x 530x100mm thick duly upholstered with new tapestry cloth as approved (rate not less than Rs 400 /Mtr) complete all as specified and as directed. |
| 93 | (k) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office) with 04 nos velcrow duly stitched as directed for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all specified and as directed. Cost of tapestry cloth shall not be less than Rs 400 for RM. |
| 94 | (l) Preparation of sufaces of sofa set 05 seater by throughly rubbing with emery paper, applying raw/burnt seina uniformly from sofa set and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. |
| 95 | Sofa Set 5 Seater Trade Pattern(a) Providing M & L new cushion foam of appropriate size and thickness,spring,ply and other accessories as required for sofa set spl trade pattern to make shape as per drg and re-upholstering with new tapestry (approved quality) including dismantling of old one complete all as specified and directed. |
| 96 | (b) Preparation of sufaces of sofa set spl trade pattern type by throughly rubbing with emery paper, applying raw/burnt seina uniformly for sofa set and polishing with mealimine wood polish one or more coats to obtain a glossy finish complete including PVC hard rubber shoes to the legs all as specified and as directed. Please Enable Macros to View BoQ information |
