|
| 1 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials,cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.). PVC Pipes25 mm Dia |
| 2 | 50 mm Dia |
| 3 | 80 mm Dia |
| 4 | 100 mm Dia |
| 5 | Supplying, fitting and fixing of C.I. Mechanical Compression flexible Collar Couplings suitable for Inch size C.I. Pipes conforming to Class-B of BS: 1211 complete with Sealing Rubber Gasket of EPDM quality (IS:5382/1985 Type- 4), Cast Iron Follower Glands and Mild Steel Nut Bolts (Zinc Coated). The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538. Fitting and fixing should be in proper position with proper care of main pipe line for leak proof condition. Fitting and fixing should be in proper position with proper care of main pipe line for leak proof condition.Diameter in inch. with minimum barrel length in mm.4 inch with length 100mm |
| 6 | Supplying, fitting and fixing bib cock or stop cock, PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent)15 mm |
| 7 | Cost iron double flanged manually operated sluice valves generally conforming to IS 14846 : 2000, having four faces and spindle nut of gunmetal, inside screw non- rising type quality gunmetal /AISI 410 spindle: seat tested to 10kg/CM2 and body tested to 15kg/CM2,flanges flat faced and drilled to 1S. : 1538 : 1993. Painted black all over with asphalt base paint. Valves tested by closed end method. NB Diameter in mm100 mm |
| 8 | Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. v) PTMT Push Cock 15 mm with spout ( Prayag or equivalent) |
| 9 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long |
| 10 | Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S-12592(M.D).ix) Light duty gully pit cover (yard gully) with with frame and hinge arrangement for opening of size each 1233.00, Cover: 300 mm X 275 mm X 30 mm,Frame: 450 mm X 375 mm X 75 mmopening: 300mm x 225mm,Weight: 43 kg (approx) |
| 11 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(iii) 630 mm X 450 mm size |
| 12 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. a) Pakur Variety |
| 13 | Brick work with 1st class bricks in cement mortar (1:4). (b) In superstructure |
| 14 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 15 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 1000 litre capacity |
| 16 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With P trap |
| 17 | Removal of rubbish earth etc. from the working site and disposal of the same beyond the compound in conformity with the Municipal/ Corporation rules for such disposal by loading into truck and unloading the same in the located place and cleaning the site in all respect as per direction of Engineer-in-Charge. |
| 18 | Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application 250 mm dia |
| 19 | Add LWC @ 1% on Total amount over item No. 1 to 15 |
| 20 | Add GST @ 18% on Total amount over item No. 16 Please Enable Macros to View BoQ information |
