|
| 1 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/ above ground level) including floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base etc complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for pressed precast concrete interlocking paver blocks glossy top any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement with pigments complete all as specified and directed. |
| 4 | M&L for pre-cast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) kerb solid blocks, exc. 10 cm in width and setting in cement mortar (1:4), complete all as specified and directed. |
| 5 | M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in levelling course finished even and fair for laying floor finishes etc complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour/ shade of tiles, laid over and including 15mm thick screed bed in cement mortar (1:6) including dismatling floor, hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour/ shade of tiles, laid over and including 10mm thick rendering in cement mortar (1:4) including dismatling floor hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 9 | M&L for kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the colour and shade of slab including rubbing and polishing, laid over and including 10 mm thick screed bed in cement mortor (1:4). complete all as specified and as directed. |
| 10 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor complete all as specified and directed. |
| 11 | M&L for 20mm thick machine cut granite of approved colour as in window cill or in platforms etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the colour and shade of granite stone including moulding the edges half round on exposed side, laid over and including 15mm thick screed base in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F in repairs 600mm x 450mm moulded glass looking mirror of selected quality and fixed to wooden plugs with chromium plated brass screws and cup washers in postion complete all as specified and directed. |
| 13 | S&F in repair moulded glass looking mirror of selected quality of thickness 4 to 5 mm and fixed to wooden plugs with chromium plated brass screws and cup washers in postion complete all as directed. |
| 14 | S&F in repairs aluminium (extruded section body) door closer hydraulically regulated designation no. 1 universal type suitable for door shutters upto 700mm in width and of weight not more than 35kg complete all as specified and directed. |
| 15 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 16 | Taking down and re-fixing of old aluminum door shutters in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips, area exc. 2.00 Sqm but n. exc. 4.00 Sqm each complete all as specified and directed. Note:- Glass pane and wire gauge will be measured and paid separately. |
| 17 | Taking down and re-fixing of old aluminum window in same opening with necessary required repairs and fittings including glass rubber bedding door frame rubber beading and glazing clips, area n. exc. 2.00 Sqm each complete all as specified and directed. Note:- Glass pane and wire gauge will be measured and paid separately. |
| 18 | M&L for taking down wooden shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm including easing and adjusting and refixing in same opening with same hardware etc. complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F in repairs 25mm dia stainless steel curtain rod decorative type design and pattern approved by GE including both end supports complete all as specified and directed. |
| 20 | S&F in repairs 25mm dia stainless steel curtain finials for curtain rod both ends complete all as specified and directed. |
| 21 | S&F in repairs stainless steel barrel tower bolt of size 125mm of extruded section and fixed in positions complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in repair 250mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed. |
| 23 | S&F in repairs stainless steel handle of size 125mm complete all as specified and directed. |
| 24 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with overall length of cover plate 75mm, fixed in floor complete all as specified and directed. |
| 25 | S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with alluminium wire staples complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F 3.0mm thick plain sheet glass ordinary quality and glazing with oil putty or fixed with fillets 2nd class hard wood of sectional area n. exc. 3.0 Sqcm and glass not exc. 0.5 Sqm each pane including hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F 4.0mm thick pin headed glass ordinary quality in square not exceeding 0.5 Sqm in each pane with oil putty/ wooden beading including hacking out old broken glass (any size, quality or description) from wooden or steel frames glazed complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in repairs PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 29 | S&F in repairs PVC (SWR) pipe bends 110mm dia provided complete all as specified and directed by the Engineer-in-Charge. |
| 30 | S&F 15mm bore, medium grade, galvanised iron pipe, with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down steel tubing of 15mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 31 | Refixing of 15mm bore old steel tubing and connection in new or old position (walls, ceilings, floors etc.) including taking up or down steel tubing of 15mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F 20mm bore, medium grade, galvanised iron pipe, with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down steel tubing of 20mm bore pipe and connection including cleaning for re-fixing or removal to store, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Refixing of 20mm bore old steel tubing and connection in new or old position (walls, ceilings, floors etc.) including taking up or down steel tubing of 20mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F in repairs brass CP bib taps, fancy type, 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repairs EWC seat cover PVC, colour as approved by GE including all fitting arrangements complete all as specified and directed. |
| 36 | S&F in repairs two way brass chromium plated fancy type bib cock 15mm bore complete all as specified and directed. |
| 37 | S&F in repairs 15mm bore fancy type brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe with telephonic arrangement complete all as specified and directed. |
| 38 | S&F in repairs 15mm bore center hole basin mixer brass, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts for iron pipe complete all as specified and directed. |
| 39 | S&F in repairs 15mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down of size 200mm x 200mm complete all as specified and directed. |
| 40 | S&F in repairs fancy type pillar taps brass, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts for iron pipe of 15mm bore complete all as specified and directed. |
| 41 | S&F in repairs brass chromium plates angle stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed. |
| 42 | S&F in repairs brass chromium plated handspray (health faucet) with flexible pipe length not less than 1.00m (minimum) fixed for EWC/ IWC suitable for 15mm bore pipe complete all as specified and directed. |
| 43 | S&F in repairs chromium plated grating of size 100mm dia complete all as specified and directed. |
| 44 | S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe (weight not less than 210gm) complete all as specified and directed. |
| 45 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 46 | S&F in repairs internal fittings kit complete for vitreous china flush cistern with twin flush complete all as specified and directed.Make:- CERA cat part No. 2115, 2235 or equivalent of make given in appx 'B' as approved by GE. |
| 47 | S&F in repairs PVC valveless syphonic action type flushing cistern low level 10 Litres capacity white, fixed with new brackets complete all as specifed and directed. |
| 48 | S&F in repairs of flush pipe of polythene of low or high density of PVC 32mm long for low level cistern complete all as specified and directed. |
| 49 | S&F in repairs of vitreous china WHB white flat back size 550mm x 400mm on new brackets excluding taps waste china and plug including bracket etc. complete all as specified and directed. |
| 50 | S&F in repairs of vitreous china WHB white flat back size 550mm x 400mm with pedestal on new brackets excluding taps waste china and plug including bracket etc. complete all as specified and directed. |
| 51 | M&L for petty repairs to high/ low level flushing cistern by adjusting the float valve, leakage PVC connection, PVC/ GI bend including replacing of L bend, float set, rubber washer check nuts plunges etc. for any type of flush complete all as specified and directed by Engineer-in-Charge. |
| 52 | Cleaning and removing all scale and dirt etc. from overhead water tanks and from mouths of circulating pipe etc. including dismantling and refixing at same or other place including writting date of cleaning on tank with enamel paint for capacity exceeding 250 Litres but not exceeding 500 Litres complete all as specified and directed by Engineer-in-Charge. |
| 53 | Cleaning and removing all scale and dirt etc. from overhead water tanks and from mouths of circulating pipe etc. including dismantling and refixing at same or other place including writting date of cleaning on tank with enamel paint for capacity exceeding 500 Litres but not exceeding 1000 Litres complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repairs CP waste coupling 32mm dia with long shank and fly nuts etc. for wash basins complete all as specified and directed. |
| 55 | S&F in repairs PVC flexible waste pipe 32/ 40mm dia with socket for WHB/ sink/ urinal upto floor level and length not less than 0.60 meter complete all as specified and directed. |
| 56 | M&L for opening of air lock/ blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from bib tap/ shower/ WHB pillar tap/ stop valves complete by air pressure/ water gravity pressure etc. complete all as specified and directed. |
| 57 | S&F rotational moulded polyethylene water storage tank of capacity 1000 Litres (cylindrical vertical with closed top), three layer construction, ISI marked, hoisted and fixed in position including GI pipe light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20mm dia including dismantling/ taking out of old water tank of having capacity exc. 500 Litres but not exc. 1000 Litres and removing from site etc. complete all as specified and as directed. |
| 58 | S&F rotational moulded polyethylene water storage tank of capacity 500 Litres (cylindrical vertical with closed top), three layer construction, ISI marked, hoisted and fixed in position including GI pipe light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/ taking out of old water tank of having capacity exc. 250 Litres but not exc. 500 Litres and removing from site etc. complete all as specified and directed. |
| 59 | S&F in repairs tank cover black (with arrangement for locking) of water storage tank of any capacity complete all as specified and directed. |
| 60 | M&L for repair to leakage of 15mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spendles as required complete all as specified and directed. |
| 61 | M&L for repair to leakage of 15mm bore CP wall mixer/ CP WHB mixer/ concealed stop cock by replacing of necessary jaguar/ cera brass spendles half round turn as required complete all as specified and directed. |
| 62 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-B, complete all as specified and directed. |
| 64 | S&F pre-painted galvalume GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete including dismantling of old unserviceable, rusted, broken (corrugated/ semi corrugated etc.) CGI/ AC/ fibre glass sheets in ridge and roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F 2.0mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap, fixed with L or J type or cranked hook bolts and washers, in roofs, walls etc. including dismantling of old unserviceable, rusted, broken (corrugated/ semi corrugated etc.) CGI/ AC/ fibre glass sheets in ridge and roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 66 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 67 | M&L in repairs for running welding, thickness of metal to be welded not exceeding 6mm complete all as specified and directed. |
| 68 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 69 | M&L for solid PVC wall lining consisting of 5.0mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 70 | M&L for 5.0mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 71 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 72 | S&F anodised aluminium snap grid frame work (600mm x 600mm) for false ceiling complete all as specified and directed. |
| 73 | S&F 8.0mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid for exposed metal frame ceiling complete all as specified and directed.Note:- Frame work for ceiling shall be measured and paid separately. |
| 74 | M&L for preparation of new decorated plastered or unplastered surfaces of ceilling and applying two coats of oil bound distemper white or tinted over a coat of white putty in patches as required complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
