|
| 1 | Maintenance of tubewells which includes round the clock monitoring of tubewells of all sizes, complete repairs/ rewinding of submersible pumpsets including cost of material components required to repair pumpsets, starters, meters etc. of electric panel of tube wells lowering and unlowering of pumpsets complete in all respect, maintenance of log-books and history sheet as directed by Engineer-in-charge for tubewell per month. (122 TW per month * 12 month) |
| 2 | 8.0 HP to 10.0 HP |
| 3 | Daily/ periodical operation of valves at supply times for specified by department per sluice valve per month. (valve rod and cap to be arranged by contractor) (90 Valve per month * 12 month) |
| 4 | 80-300 mm |
| 5 | Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these to concerns divisional store own his cost. |
| 6 | 65 mm |
| 7 | 80 mm |
| 8 | Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. |
| 9 | Sluice Valve Size 80 mm |
| 10 | Sluice Valve Size 100 mm |
| 11 | Sluice Valve Size 125 mm |
| 12 | Sluice Valve Size 150 mm |
| 13 | Sluice Valve Size 200 mm |
| 14 | Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm). |
| 15 | 2 ench dia. Size (50 mm) |
| 16 | 2.5 ench size (65 mm) |
| 17 | Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. |
| 18 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge |
| 19 | MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) |
| 20 | Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concerns store own his cost. |
| 21 | 32 mm |
| 22 | 50 mm |
| 23 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge |
| 24 | MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) Please Enable Macros to View BoQ information |
