|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 2 | Carriage of earth, sand, lime, morrum, manure or sludge including loading/ unloading etc. complete with lead upto 15km. |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 5 | Providng and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 6 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 7 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 8 | Providing and laying S&S centrifugally cast (spun) iron pipes (ClassLA)conforming to IS - 1536 : 250 mm dia. Pipe |
| 9 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | Aluminium sheeting fixed with encapsulated lens type reflectivesheeting in various size including lettering and signs as applicable |
| 11 | Providing and fixing of posts and required frame work as per provided drawing of stainless steel ASTM grade 304 pipe (round/ rectangular) including cutting, welding, hoisting, polishing, buffing and all necessary holes, nuts, bolts, caps and anchor plates of stainless steel ASTM grade 304 complete as per design, drawing & direction of the Engineer incharge. |
| 12 | Providing and cutting hoisting and fixing in position including fabrication of 4mm thick Aluminium composite pannel sheet (ACP) made of two aluminium sheet of 0.50 mm thick each having a distance of 3.00 mm filled with rubber polymer to the entire satisfaction of Engineer in charge confirming to various concerned ASTM standards includes nuts and bolts / riveting (Measurements to be taken on the face area of sheet) |
| 13 | Supplying and fixing of micro prismatic retro reflective sheeting confirming to type XI of ASTM D4956 shall be pressure fixed to the full face of the ACP sheet as background sheet (in approved colour) and the top layer will be overlaid with electro cut transparent film of approved make and colour to create the desired road sign including cutting, cleaning, pasting etc. complete as per design, drawing and direction of Engineer in charge. (Payment shall be made for flat area of sheet excluding cost of ACP sheet.) |
| 14 | Providing & fixing in position High bond (VHB) double tape 24mm wide 2.3mm thick for jointing ACP sheet SS/MS frame including all process like cleaning, cutting, chemical application pressing etc. as per sample approved by Engineer incharge. Please Enable Macros to View BoQ information |
