Tender For Repair To Wooden Furniture Including Canning At Jcos/Or Md Accn And Otm Accn Under Ge (A) No 2 Jodhpur As Per Cpp Ser No 33, Jodhpur-Rajasthan

TDR : 55606193

Tender Notice
BOQ

17 Days Left

Jodhpur , Rajasthan

Tender Brief : Tender For Repair To Wooden Furniture Including Canning At Jcos/Or Md Accn And Otm Accn Under Ge (A) No 2 Jodhpur As Per Cpp Ser No 33

Document Fees
₹ 500 /-

EMD
₹ 90000.0 /-

Tender Value
₹ 45 Lakhs /-

Submission Date
11-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Replacement of following U/S parts of \\"Chair Dining JCO's /ORs\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/MAP-II/05) at site.
2	S&F of new 4mm thick PVC seat with holes & is not less than 0.500 kgs alongwith wooden support in the middle as directed by Engr-in-Charge.
3	S&F of new Rubber shoes
4	S&F of new Front leg (teak wood)
5	S&F of new Rear legs (teak wood)
6	S&F of new Front/rear rail (teak wood)
7	S&F of new Stiffeners.
8	S&F of new Side rails
9	Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
10	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
11	Replacement of following U/S parts of \\"Chair Writing FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-202, 250, 280) at site.
12	S&F of new Front legs
13	S&F of new Rear legs
14	S&F of new Front/ back rails (including holes for canning)
15	S&F of new Side rails (including holes for canning)
16	S&F of new Arm/Handles
17	S&F of new Stiffeners
18	Rubber shoes
19	Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
20	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
21	Replacement of following U/S parts of \\"Chair Dining FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-228, 279 ) at site.
22	S&F of new Front legs
23	S&F of new Rear legs
24	S&F of new Front/ back rails (including holes for caning)
25	S&F of new Side rails (including holes for caning)
26	S&F of new Stiffeners
27	Rubber shoes
28	Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
29	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. Make-Berger/Asian/Nerolac
30	Replacement of following U/S parts of \\"Bed Hard with ply top\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. ( FD-21, 246, 264) at site
31	S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading.
32	S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading .
33	S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.
34	S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg .
35	S&F new 12mm thick BWR phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size. (Green Ply/Century Ply/Archidply)
36	Tightening of complete Bed Hard by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
37	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
38	Replacement of following U/S parts of \\"Chair Easy FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-229) at site.
39	S&F of new Front/Rear legs
40	S&F of new Side rails (including holes for caning)
41	S&F of new Front/Rear rails (including holes for caning)
42	S&F of new Arm/Handles
43	S&F of new Stiffeners
44	Rubber shoes
45	Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
46	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
47	Replacement of following U/S parts of \\"Peg Table\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-277) at site.
48	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
49	Long rails
50	Short rails
51	Stiffeners
52	Rubber shoes
53	Tightening of complete Peg Table by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
54	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
55	Replacement of following unserviceable parts of \\"Table Bed Side\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-248, 276) at site.
56	S&F new side planks of size 230x510mm, made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round PVC edge beading as per drg.
57	S&F new top of size 230x450mm, made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round PVC beading as per drg.
58	S&F new 6mm thick back ply of size 510x450mm as per drg.
59	S&F new shelf made out of 18mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round PVC edge beading as per drg.
60	Replacement of following u/s parts of \\" Table Centre \\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD-235, 274, 393) at site.
61	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
62	Long rails
63	Short rails
64	Wooden battens
65	Rubber shoes
66	Tightening of completeTable Centre by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
67	M&L one or more coat Melamine wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
68	Replacement of following U/S parts of \\"Table Dining 4 Person (1200x900x760mm) \\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg directed by Engr-In-Charge. ( FD/MAP/II/03). at site
69	S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed.
70	Long rail
71	Short rail
72	Buffers
73	Tightening of complete Table Dining by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
74	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
75	Replacement of following U/S parts of \\"Table Dining 6 Person\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD 239, 273 & FD/MAP/II/03) at site.
76	S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed.
77	Long rail
78	Short rail
79	Buffers
80	Tightening of complete Table Dining 6 person by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
81	M&L one or more coat Melamine wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
82	Replacement of following U/S parts of \\"Table Dining 8 Person\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD 239, 273 & FD/MAP/II/03) at site.
83	S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed.
84	Long rail
85	Short rail
86	Buffers
87	Tightening of complete Table Dining 8 person by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
88	M&L one or more coat Melamine wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
89	Replacement of following U/S parts of \\" Table Dressing Ladies\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD- 251, 378) at site.
90	S&F drawer of preleminated MDF board 18mm thick exterior grade duly fixed with 0.8mm thick PVC beading as per drg and as directed by Engr-in-Charge.
91	S&F suitable new acrylic knob as approved by GE.
92	S&F frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge
93	S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x366x5mm thick as approved by GE.
94	S&F suitable new table top/bottom of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading
95	S&F suitable new side plank of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading
96	S&F suitable size new leg of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
97	S&F suitable new plain sliding glass as per drg and as directed by Engr-in-Charg.
98	Tightening of complete Table Dressing Ladies by suitable size screw & nails as directed by Engr-in-Charge at site.
99	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
100	Replacement of following U/S parts of \\"Table Dressing (ladies) with Stool \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/MAP-II/07) at site.
101	S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.
102	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick ply wood with 4mm thick 0.8mm PVC edge beading as per drg & directed.
103	S&F suitable new 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge
104	S&F suitable new top of table dressing ladies (box) of prelaminated MDF board of 18 mm thick with 4mm thick half round teak wood beading.
105	S&F suitable new side planks of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
106	S&F suitable new door plank of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
107	S&F suitable new bottom (box) of 12mm thick plywood as shown on drg.
108	S&F suitable new stainless steel piano hinges and one nos magnetic catcher as shown on drg.
109	S&F of new heavy duty mild steel telecscopic channel for smooth functioning of drawer as approved by GE.
110	S&F suitable new 50 mm long 'D' shaped stainless steel handle as approved by GE.
111	S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.
112	S&F new cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg.
113	S&F new leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE.
114	S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg.
115	Tightening of complete Table Dressing Ladies by suitable size screw & nails as directed by Engr-in-Charge at site.
116	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
117	Replacement of following U/S parts of \\"Table Writing FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-33, 249, 275) at site.
118	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
119	Leg (35x35x760mm)
120	Long rails
121	Short rails
122	S&F of new sides of box made of 18mm thick Pre laminated MDF board as per drg and directed by Engr-In-Charge.
123	S&F of new door made of 18mm thick Pre laminated MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading as directed by Engr-In-Charge.
124	S&F of new self of 18mm thick Pre laminated MDF board as per drg and directed by Engr-In-Charge.
125	S&F of new central leg (150 to 200mm long) of teak wood as per directed by Engr-In-Charge.
126	S&F suitable new knobs / handle of approved quality.
127	Buffers
128	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.
129	S&F of new back ply of 6mm thick as per drg and as directed by Engr-In-Charge.
130	Tightening of complete Table Writing by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
131	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
132	Replacement of following U/S parts of \\"Teapoy\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-232, 278, 382) at site.
133	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
134	Long rails
135	Short rails
136	Stiffeners
137	Buffers
138	Tightening of complete Teapoy by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
139	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
140	Replacement of following U/S parts of \\"Table 3'x2' with & without drawer\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-283, 284). at site
141	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
142	Legs (30x60x760mm)
143	Long rail
144	Short rail
145	Stiffeners
146	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.
147	Rubber shoes
148	Tightening of complete Table 3'x2' by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
149	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
150	Replacement of following U/S parts of \\"Table Dressing Gents\\" with suitable size new parts of existing shape & size complete to match the original as per drg no FD-230, 379 and directed by Engr-In-Charge at site.
151	S&F new top of 12mm thick prelaminated MDF board of exterior grade with 4mm thick half round beading.
152	S&F new bottom of 12mm thick commercial ply with 4mm thick half round beading.
153	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.
154	S&F of knob acrylic of approved quality
155	S&F of looking mirror of first class quality size 760x380x5mm thick as per drg and directed by Engr-in-Charge.
156	S&F new 6mm thick ply for back side of mirror with hanging clip and iron frame as directed by Engr-in-Charge
157	Tightening and complete fitting of table by suitable size nails,stud & screw as directed by Engr-in-Charge Complete fitting will be carried out at site.
158	M&L for two or more coats french polishing with high class finishing as directed by Engr-in- charge.
159	Replacement of following U/S parts of \\"Table 900x900x760mm\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-291) at site
160	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
161	Long rail
162	Short rail
163	Rubber shoes
164	Tightening of complete Table by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
165	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
166	Replacement of following U/S parts of \\"Form without Back 1900mm Wooden Top\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-1027(MR)/FD-77M) at site.
167	S&F new Top of Hard Wood Teak as per existing shape and size shown on drg as directed by Engr-in- charge/BSO
168	M&L one or more coat french polish on wooden parts and paint on iron surface of approved shade and quality and one coat of french polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge. Make-Berger/Asian/Nerolac
169	Replacement of following U/S parts of \\"Trestle Store room wooden\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-86M) at site.
170	Long rails
171	Short rails
172	Wooden battens
173	M&L one or more coat french polish on wooden parts and paint on iron surface of approved shade and quality and one coat of french polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
174	Replacement of following U/S parts of \\" Sofa Set 4/5 Seater\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg including re cushioning of sofa set 02,03,04 & 05 and directed by Engr-In-Charge. (FD-258, 281, 373) at site.
175	Front/Rear legs
176	Side rails
177	Front/rear side long rails
178	Arm/Handles
179	Wooden battens
180	Buffers
181	Tightening of complete Sofa Set 4/5 Seater by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
182	For 4 Seater M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
183	For 5 Seater M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
184	Re-Cushioning of sofa set 02,03,04 & 05 seater : (FD-258, FD-281, FD-373)
185	S&F suitable size new cloth cover with YKK chain for sofa cushion size 22”x21”x4” of superior quality tapestry cloth including markin as approved by GE,
186	S&F new cushion foam 100mm thick and 40density, size 22”x21”x4” of superior quality as approved by GE.
187	Replacement of following U/S parts of \\"Table Wooden 1560x850x760mm\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge at site.
188	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
189	Long rail
190	Short rail
191	Rubber shoes
192	Tightening of complete Table by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
193	M&L two or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
194	Replacement of following U/S parts of \\"Chair Wooden Bottom \\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-285 or similar ) at site.
195	S&F of new Front legs
196	S&F of new Rear legs
197	S&F of new Front/ back rails
198	S&F of new Side rails
199	S&F of new Stiffeners
200	S&F of new bottom seat of Plywood 12mm BWR Phenol bonded
201	Rubber shoes
202	Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
203	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
204	Replacement of following U/S parts of \\"Board Notice 8'x 4' \\" with suitable size new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge FD-99(M) at site.
205	S&F suitable new Plain Glass sheet of first class quality ISI marked size as shown on drg and as directed by Engr-in-Charge.
206	S&F suitable size new side rail of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
207	S&F suitable size new long rail of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
208	S&F new shutter (Side/Bottom/Top) of Ist Class Teak wood as shown on drg and as directed by Engr-in-Charge at Site .
209	Tightening and complete fitting of Board Notice by suitable size nails & screw as directed by Engr-in-Charge at site.
210	M&L for two or more coats french polishing with high class finishing as directed by Engr-in- charge.
211	S&F new hinges (75mm).
212	S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.
213	Replacement of following U/S parts of \\"Board Notice 6'x 3' \\" with suitable size new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge FD-99(M) at site.
214	S&F suitable new Plain Glass sheet of first class quality ISI marked size as shown on drg and as directed by Engr-in-Charge.
215	S&F suitable size new side rail of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
216	S&F suitable size new long rail of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
217	S&F new shutter (Side/Bottom/Top) of Ist Class Teak wood as shown on drg and as directed by Engr-in-Charge at Site .
218	Tightening and complete fitting of Board Notice by suitable size nails & screw as directed by Engr-in-Charge at site.
219	M&L for two or more coats french polishing with high class finishing as directed by Engr-in- charge.
220	S&F new hinges (75mm).
221	S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.
222	Replacement of following U/S parts of \\"Board Notice 6'x 4' \\" with suitable size new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge FD-99(M) at site.
223	S&F suitable new Plain Glass sheet of first class quality ISI marked size as shown on drg and as directed by Engr-in-Charge.
224	S&F suitable size new side rail of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
225	S&F suitable size new long rail of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
226	S&F new shutter (Side/Bottom/Top) of Ist Class Teak wood as shown on drg and as directed by Engr-in-Charge at Site .
227	Tightening and complete fitting of Board Notice by suitable size nails & screw as directed by Engr-in-Charge at site.
228	M&L for two or more coats french polishing with high class finishing as directed by Engr-in- charge.
229	S&F new hinges (75mm).
230	S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.
231	Repair/Replacement of following u/s parts of \\"Composite Office Table 1200x600x760mm\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge. at site.
232	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
233	S&F New lock of 4lever with duplicate key of approved quality.
234	Repair of drawer and shutter including removal of dents/bends & welding and required smooth movement of drawer all as specified and shown on drg and directed by Engr-In-Charge.
235	S&F of PVC shoes
236	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
237	Repair/Replacement of following u/s parts of \\"Composite Office Table 1500x900x760mm\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge. at site.
238	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
239	S&F New lock of 4lever with duplicate key of approved quality.
240	Repair of drawer and shutter including removal of dents/bends & welding and required smooth movement of drawer all as specified and shown on drg and directed by Engr-In-Charge.
241	S&F of PVC shoes
242	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
243	Repair/Replacement of following u/s parts of \\"Composite Office Table 1350x750x760mm\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge. at site.
244	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
245	S&F of PVC shoes
246	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
247	Replacement of following u/s parts of \\"Computer table\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge (FD/E6/MAP/03 ) at site.
248	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
249	S&F new side plank of 18mm thick prelaminated MDF board as shown on drg.
250	S&F new keyboard tray of 18mm thick prelaminated MDF board including beading.
251	S&F of new heavy duty of suitable size telecscopic channel for smooth functioning of key board drawer.
252	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board.
253	S&F of new bottom shelf of 18mm thick pre- laminated MDF board including beading .
254	S&F of new adjustable hard shoes all as directed by Engr-in-Charge.
255	M&L for two or more coats synthetic enamel black paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by engr in charge.
256	Replacement of following U/S parts of \\"Dressing Gents with Mirror Map\\" with suitable size new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge at site.
257	S&F suitable new 5mm thick looking mirror (Make- Saint Gobin/ Modi Guard) with back supported by 06mm plywood of existing shape & size with suitable nut & bolts.
258	S&F suitable new 12mm thick back ply of box .
259	S&F new top/base of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
260	S&F new side planks of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
261	S&F of new piano hinges and one nos magnetic catcher as shown on drg.
262	S&F complete new beading of 4mm thick and fixed with headless nail.
263	Tightening and complete fitting of table by suitable size nails,stud & screw as directed by Engr-in-Charge Complete fitting will be carried out at site.
264	S&F of new 05 mm thick plain glass self in table dressing as shown on drg.
265	M&L for two or more coat french polish with high class finishing.
266	Replacement of following U/S parts of \\"Hat Stand\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-23, 233, 362) at site.
267	S&F 4mm thick teak face decorative plywood fixed with fevicol tipped with teak wood edging all round size 1330x710 mm as per drg and as directed by Engr-in-Charge.
268	S&F of Mirror of size 300x440x5mm thick as per drg.
269	S&F of Aluminium Peg set 120 mm with mark of approved shape and size.
270	M&L for two or more coat french polish with high class finishing.
271	Replacement of following U/S parts of \\"Table office clk wooden\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge at site.
272	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
273	Long rail
274	Short rail
275	Rubber shoes
276	Tightening of complete Table by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
277	M&L two or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
278	Repair/Relacement of following U/S parts of \\"Almirah large wooden w/s and 1/2h &1/2s\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge at site.
279	Repair of almirah door by suitable size nails & wooden pieces as per existing shape & size as directed by Engr-In-Charge
280	Replacement of Shelf of almirah w/s
281	Replacement of Shelf of almirah 1/2h &1/2s
282	MS hinges size 65mm
283	MS CP haps and staple of size 50mm
284	Tightening of complete almirah by suitable size nails & wood pieces as directed by Engr-in-Charge on site.
285	M&L two or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
286	Repair/Relacement of following U/S parts of \\" Almirah medium wooden w/s and 1/2h &1/2s\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed.
287	Repair of almirah door by suitable size nails & wooden pieces as per existing shape & size as directed by Engr-In-Charge
288	Replacement of Shelf of almirah w/s
289	Replacement of Shelf of almirah 1/2h &1/2s
290	MS hinges size 65mm
291	MS CP has and staple of size 50mm
292	Tightening of complete almirah by suitable size nails & wood pieces as directed by Engr-in-Charge on site.
293	M&L two or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
294	Replacement of following U/S parts of \\"Computer chair revolving/high back and med back\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/E6/MAP/01) at site.
295	S&F new 12 mm thick hot pressed plywood for seat as shown on drg.
296	S&F new moulded polyurethane foam of 50mm thick with 32 density for seat.
297	S&F new tapestry cloth/leatherite rexine as approved by GE (cloth/rexine Make-Bombay Dyeing/D Decor) alongwith PVC lipping all round the seat.
298	S&F new 12 mm thick hot pressed plywood for back as shown on drg.
299	S&F new moulded polyurethane foam of 50mm thick with 32 density for back
300	S&F new tapestry cloth/leatherite rexine as approved by GE alongwith PVC lipping all round the back.
301	S&F new armrest made of black integral skin polyurethane & hardness with nuts & bolts as approved by Engr in charge.
302	S&F new hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.
303	S&F new MS bearing of existing shape & size of various type chair revolving steel.
304	S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.
305	S&F suitable caster wheels of existing shape & size with nut & bolts as approved by Engr-in-Charge.
306	Two or more coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface.
307	Re canning of (Chair Dining FD-228/279, Chair Easy FD-229, and Chair Writing FD-202,250 & 280) shall be done with plastic cane 2mm wide and half round for seat and back and 3mm wide for border in white colour 0.4mm thick in true godrej patten all as shown on drawing and directed by Engr-in-Charge/BSO at site. Make-Premium/Shah or as approved by GE.Note - (i) Repair/Maint work will be executed where the furniture exist in different users /Md Accn under AOR of GE (A) No 2 Jodhpur as directed by Engr-in-Charge/BSO.(ii) The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Furniture Tenders

Furniture Items Tenders

Wooden Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair To Wooden Furniture Including Canning At Jcos/Or Md Accn And Otm Accn Under Ge (A) No 2 Jodhpur As Per Cpp Ser No 33, Jodhpur-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair To Wooden Furniture Including Canning At Jcos/Or Md Accn And Otm Accn Under Ge (A) No 2 Jodhpur As Per Cpp Ser No 33, Jodhpur-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us