|
| 1 | Supply of 150 Liter capacity Usha Drinking Water Coolar make with Refrigarator Modal No.(SRA 150150G,SS304) BIS No.9159385 havying cooling capacity 150 Liter with extra large stainless steel body with water tap 2 Nos complete in all respects. |
| 2 | Supply of 4 KVA copper wound Stabilizer range 140-280 with plug top complete in all respects. |
| 3 | Installation and Comissioning charges of Water Coolar incl. connection complete in all respects. |
| 4 | Construction of 2.00m x 1.50 m x 2.80 m Water Coolar Cage made out of 50x50x5mm M.S. angle iron with 10 SWG welded wire mesh of size 1”x2”galvanized G I Sheet of 24 SWG on roof, top and side to protect the coolar from rain. The foundation of cage shall be of 0.15m in 1:2:4 cement concrete base and brick work in 1:6 cement and fine sand. The flooring of the cage should be 6” base concrete in the ratio of 1:6:12 and 4.00mm thick and plaster in 1:2:4 plain including painting with aluminium paints. The job includes supply of all materials, Labour T&P required for proper completion of work. (As per civil schedule Analysis) |
| 5 | S/F of Chlorinated Polyvinyl Chloride CPVC Pipes of 15mm dia cpvc Pipe for Water Coolar Fittings, clamps including all materials, Labour etc complete in all respects. |
| 6 | S/F of Chlorinated Polyvinyl Chloride CPVC Pipes wash out pipe of 40mm dia cpvc Pipe for wastage water drain from Water Coolar connection complete in all respects. |
| 7 | S/F of brass stop cock of approved make complete in all respects. |
| 8 | S/F of brass bib cock of approved make complete in all respects. |
| 9 | S/F of uplasticised PVC connection pipe with brass unions 30cm length 15mm dia Pipe Fittings including all materials, Labour etc complete in all respects. |
| 10 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 11 | S/fixing of one number 8 to 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour. T & P required for proper completion of the work as directed at site. |
| 12 | S/fixing of power plug with 15A/250 V flush type modular switch and 5 pin 15A/250 V flush type universal socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects |
| 13 | S/F of 6 Amp to 32 Amp SPMCB (10 KA) C Curve Cat A |
| 14 | S/F of 6 Amp to 32 Amp. DPMCB (10 KA) C curve Cat A |
| 15 | S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat B |
| 16 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 6sqmm 2 core |
| 17 | Supply and Hosting of syntax or equivalent Make High Density Polyethylene sheenless moulded Tank and placing in position. The Job is inclusive of all taxes,Labour T&P and other material for proper completion of work as directed by Engineer in charge at site. Please Enable Macros to View BoQ information |
