Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Supply of Manpower for Annual Maintenance and Operation Contract. |
| 2 | OD265112/2025-2026:Supply of one Wireman Helper during the AMC period for assisting in the operation, routine maintenance, and minor repair works of electrical installations, as directed by the Engineer-in-Charge. The Wireman Helper shall preferably possess basic knowledge of electrical works and shall assist the Electrician/Skilled Assistant in attending shift duties, carrying out routine inspections, cleaning of panels and equipment, cable dressing, replacement of minor electrical accessories, and other allied works. The duties shall include assisting in fault identification, attending breakdown calls, restoration of power supply, handling of tools and materials, and maintaining proper housekeeping in electrical rooms, substations, and service areas. The Wireman Helper shall strictly follow all safety instructions, use prescribed personal protective equipment (PPE), and comply with all statutory safety norms and site instructions issued by the Engineer-in-Charge. The duty hours, shift pattern, and nature of duties of the Wireman Helper shall be decided by the Engineer-in-Charge and may be modified as per site requirements. The Wireman Helper shall be available to work in all three shifts. The contractor shall arrange and provide, at his own cost, all necessary tools, plants, testing instruments, and measuring equipment required for the execution of the work and for effective performance of duties by the Skilled Assistant during the entire contract period. |
| 3 | OD265113/2025-2026:Supply of one Electrician possessing a valid ITI/ITC certificate in the Electrician trade with a minimum of two (2) years relevant experience during the AMC period for attending shift duties as directed by the Engineer-in-Charge. The nature, timing, and schedule of duties of the Electrician shall be decided by the Engineer-in-Charge and may be altered from time to time as per site requirements. The Electrician shall be responsible for the routine operation, maintenance, and upkeep of electrical installations, DG sets, lighting systems, PA system and fire protection systems, ensuring that all electrical and allied systems are maintained in safe and working condition at all times. The duties shall include continuous monitoring of installations; diagnosing electrical faults; repairing or replacing defective components; attending to petty repairs; responding promptly to breakdown calls; and restoring power supply as and when required. The Electrician shall act swiftly during breakdowns and shall assess and report to the Engineer-in-Charge whether the fault can be rectified immediately or whether shutdown of services is required, including an estimate of the expected downtime. The Electrician shall carry out periodic inspections and maintenance of existing and new electrical services, including single-phase and three-phase systems (120 V, 240 V, and 480 V or equivalent), wiring, conduits, panels, circuit breakers, contactors, relays, timers, and control systems. The scope of work shall also include installation, replacement, and maintenance of light fixtures, switches, receptacles, wiring, and other electrical accessories, as well as operation of standard electrical tools, testing instruments, power tools, and equipment required for electrical installation, maintenance, and repair activities. The Electrician shall maintain all prescribed records, log books, inspection registers, and breakdown reports, and submit the same to the Engineer-in-Charge as required. The Electrician shall provide guidance and assistance to Wireman Helpers, Skilled Assistants, and other maintenance staff assigned to the electrical works, and shall perform any other related duties entrusted by the Engineer-in-Charge or management in the interest of smooth operation of the installations. The Electrician shall be available to work in all three shifts. The contractor shall arrange and provide, at his own cost, all necessary tools, plants, testing instruments, and measuring equipment required for the execution of the work and for effective performance of duties by the Electrician during the entire contract period. |
| 4 | OD265115/2025-2026:Supply of one Skilled Assistant possessing a valid ITI/ITC certificate in HVAC / mechanic in Refrigeration and Air conditioning trade with a minimum of two (2) years relevant field experience during the AMC period for attending shift duties as directed by the Engineer-in-Charge. The nature, timing, and schedule of duties of the Skilled Assistant shall be decided by the Engineer-in-Charge and may be modified from time to time as per site requirements. The Skilled Assistant shall be responsible for the operation, routine monitoring, and preventive maintenance of air-conditioning and ventilation systems, including VRV/VRF units, split air conditioners, package units, AHUs, FCUs, ventilation fans, and associated electrical and control systems. The duties shall include checking refrigerant pressures and temperatures, electrical parameters, belts, filters, drain lines, and control wiring; attending to minor repairs and leakages; assisting in major repairs and breakdown rectification and coordinating with OEMs or authorized service agencies for major repairs, as directed by the Engineer-in-Charge. The Skilled Assistant shall maintain all prescribed log books, checklists, and maintenance records related to HVAC systems and shall submit reports as and when required. The Skilled Assistant shall strictly adhere to all safety norms, and site instructions, including safe handling of refrigerants and compliance with electrical safety practices. The Skilled Assistant shall be available on demand, in shifts, and on call for emergency requirements. The contractor shall arrange and provide, at his own cost, all necessary tools, plants, testing instruments, and measuring equipment required for the execution of the work and for effective performance of duties by the Skilled Assistant during the entire contract period. |
| 5 | OD265114/2025-2026:Providing and deploying one Skilled Assistant possessing a Diploma in Electrical and Electronics Engineering or Electrical Engineering, with a minimum of two (2) years relevant field experience, during the AMC period for attending shift duties as directed by the Engineer-in-Charge. The nature, timing, and schedule of duties of the Skilled Assistant shall be decided and may be modified from time to time by the Engineer-in-Charge as per site requirements. The Skilled Assistant shall be responsible for the routine operation, continuous monitoring, and minor maintenance of electrical installations, DG sets, air-conditioning systems, and fire protection systems. The duties shall include attending to minor faults, assisting in breakdown rectification, coordinating with authorized service agencies for major repairs as directed, and maintaining all prescribed log books, registers, inspection records, and reports. The Skilled Assistant shall strictly comply with all applicable safety regulations, statutory requirements, and site instructions issued by the Engineer-in-Charge, and shall be available on demand, in shifts, and on call for emergency requirements. The contractor shall arrange and provide, at his own cost, all necessary tools, plants, testing instruments, and measuring equipment required for the execution of the work and for effective performance of duties by the Skilled Assistant during the entire contract period. |
| 6 | Supply of Luminaries, Switches, Sockets, Wires, modular boxes and cables |
| 7 | OD261414/2025-2026:Supply of 5W E26/E27 base LED bulb of approved make, suitable for general lighting applications. The bulb shall have an E27 screw cap, colour temperature in between 2700 K to 4000 K, and shall operate on 230 V AC, 50 Hz supply. The LED bulb shall have a minimum system efficacy of not less than 100 lm/W, power factor not less than 0.9, and shall be provided with an integral electronic driver. The bulb shall be energy-efficient, flicker-free, and compliant with relevant BIS/IEC standards. |
| 8 | OD261416/2025-2026:Supply of 9 W B22 base LED cool day white bulb with a minimum three-star energy rating, of approved make, suitable for general lighting applications. The bulb shall have a B22 bayonet-type base and cool day white colour temperature, and shall be suitable for operation on 230 V AC, 50 Hz, single-phase supply. The LED bulb shall have a minimum system efficacy of not less than 100 lm/W, power factor not less than 0.90, and shall be provided with an integral electronic driver. The bulb shall be energy-efficient, flicker-free, and shall comply with relevant BIS/IEC standards. |
| 9 | OD261636/2025-2026:Supply of 2-feet LED mirror light of approved make, suitable for wall mounting above mirrors in toilets, wash basins, and similar areas. The luminaire shall be of slim and compact design with housing made of corrosion-resistant material such as aluminium or high-quality polycarbonate, with a suitable diffuser to provide uniform and glare-free illumination. The LED mirror light shall have a minimum system efficacy of not less than 100 lm/W, THD is <10%, Surge Protection up to 2.5KV and shall provide uniform illumination suitable for grooming applications. The luminaire shall be complete with an integral electronic LED driver and shall be suitable for operation on 230 V AC, 50 Hz single-phase supply. The fitting shall have a minimum protection of IP20 for indoor use. The fitting shall be complete in all respects, including mounting accessories, internal wiring, and connectors, and shall comply with relevant BIS/IEC standards. The product shall be provided with a minimum warranty of Two to Three year. |
| 10 | OD261314/2025-2026:Supply of 1200mm 20 W LED linear batten light fitting suitable for surface mounting. The luminaire shall be a lightweight, screwless design suitable for modern commercial applications, comprising an extruded aluminium housing with superior surface finish for enhanced heat dissipation and long service life. The luminaire shall be provided with a high-transmittance polycarbonate diffuser to ensure high system efficacy and uniform, glare-controlled illumination. The LED batten shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. The LED module shall be of long-life type with reliable thermal management, and the luminaire shall be complete with an integral electronic LED driver. The luminaire shall be suitable for operation on 230 V AC ±10%, 50 Hz single-phase supply. The fitting shall be complete in all respects, including necessary mounting accessories, internal wiring, and connectors, and shall comply with relevant BIS/IEC standards. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 11 | OD263923/2025-2026:Supply of 1200mm T8 LED tube light with pins on both ends (double-ended power input type), of approved make, suitable for replacement of conventional fluorescent tube lights. The tube shall be of standard T8 size with G13 bi-pin base at both ends and shall be suitable for operation on 230 V AC, 50 Hz single-phase supply. The LED tube shall have a minimum system efficacy of not less than 100 lm/W, power factor not less than 0.90, and shall be provided with an integral electronic driver. The tube shall provide uniform illumination, be flicker-free, and shall have a robust glass or shatter-proof polycarbonate body with suitable diffuser. The LED tube shall be compatible with rewired fittings by bypassing the existing choke and starter, as per manufacturer?s instructions. The product shall be energy-efficient and shall comply with relevant BIS/IEC standards. The tube light shall be supplied complete in all respects and shall carry a minimum warranty of one (1) year from the date of supply. |
| 12 | OD263924/2025-2026:Supply of two-pin type LED PL lamp of 18 W, including testing and commissioning, complete as required and as directed by the Engineer-in-Charge. |
| 13 | OD264286/2025-2026:Supply of LED Bulkhead Light Fitting having a power rating of 10 W with a minimum luminous efficacy of 100 lumens per watt, providing cool white illumination with CRI>80. The luminaire shall be suitable for outdoor mounting locations with environmental protection of IP65 and impact resistance rating of IK08. The optical cover shall be made of high-quality polycarbonate or equivalent vandal-resistant material, ensuring uniform and glare-free light distribution. The housing shall be corrosion-resistant, made of UV-stabilized polycarbonate or die-cast aluminium with suitable finish for enhanced durability. The driver shall be constant current, high-efficiency type with minimum 4 kV surge voltage protection and shall comply with relevant BIS/IS safety standards. The luminaire shall be suitable for continuous duty operation with stable performance under varying supply conditions. The fitting shall be supplied complete with necessary mounting hardware suitable for wall/ceiling installation. |
| 14 | OD264290/2025-2026:Supplying of PVC batten/ angle holder including connection etc. as required. |
| 15 | OD261326/2025-2026:Supply of 1200 lumen round or square recessed LED luminaire, up to a maximum size of 1ft x 1ft, made of CRCA sheet steel or die-cast aluminium housing, complete with suitable LED driver and accessories, and suitable for recessed mounting. The luminaire shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. LED chip shall be of approved make such as Cree / Osram / Lumileds / Nichia or equivalent, and the Unified Glare Rating (UGR) shall be less than 19. The fitting shall be complete in all respects and suitable for operation on 230 V AC, 50 Hz supply. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 16 | OD261327/2025-2026:Supply of 1500 lumen round or square recessed LED luminaire, up to a maximum size of 1ft x 1ft, made of CRCA sheet steel or die-cast aluminium housing, complete with suitable LED driver and accessories, and suitable for recessed mounting. The luminaire shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. LED chip shall be of approved make such as Cree / Osram / Lumileds / Nichia or equivalent, and the Unified Glare Rating (UGR) shall be less than 19. The fitting shall be complete in all respects and suitable for operation on 230 V AC, 50 Hz supply. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 17 | OD261336/2025-2026:Supply of 1800 lumen round/ square recessed fitting made of CRCA sheet steel/ diecast aluminium housing, complete with LED driver, suitable for recessed mounting. The luminaire shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. LED chip shall be of approved make such as Cree / Osram / Lumileds / Nichia or equivalent, and the Unified Glare Rating (UGR) shall be less than 19. The fitting shall be complete in all respects and suitable for operation on 230 V AC, 50 Hz supply. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 18 | OD261786/2025-2026:Supply of 1800 to 2000 lumen round/ square(1X1) surface fitting made of CRCA sheet steel/ diecast aluminium housing, complete with LED driver, suitable for recessed mounting. The luminaire shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. LED chip shall be of approved make such as Cree / Osram / Lumileds / Nichia or equivalent, and the Unified Glare Rating (UGR) shall be less than 19. The fitting shall be complete in all respects and suitable for operation on 230 V AC, 50 Hz supply. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 19 | OD261337/2025-2026:Supply of 3000 lumen square recessed LED luminaire (2 ft × 2 ft) made of CRCA sheet steel housing of minimum 0.5 mm thickness, complete with LED driver, suitable for recessed mounting. The luminaire shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. LED chip shall be of approved make such as Cree / Osram / Lumileds / Nichia or equivalent, and the Unified Glare Rating (UGR) shall be less than 19. The fitting shall be complete in all respects and suitable for operation on 230 V AC, 50 Hz supply. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 20 | OD261732/2025-2026:Supply of 3000 lumen surface mounted type LED luminaire made of CRCA sheet steel/Die cast Aluminium housing, complete with LED driver, suitable for recessed mounting. The luminaire shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. LED chip shall be of approved make such as Cree / Osram / Lumileds / Nichia or equivalent, and the Unified Glare Rating (UGR) shall be less than 19. The fitting shall be complete in all respects and suitable for operation on 230 V AC, 50 Hz supply. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. Make Philips SmartBright Surface SM270C LED 30S 6500 PSU WH or its equivalent. |
| 21 | OD261339/2025-2026:Supply of 3600 lumen square recessed LED luminaire (2 ft × 2 ft) made of CRCA sheet steel housing of minimum 0.5 mm thickness, complete with LED driver, suitable for recessed mounting. The luminaire shall have a minimum system efficacy of 110 lm/W, power factor not less than 0.95, and total harmonic distortion (THD) less than or equal to 10%. LED chip shall be of approved make such as Cree / Osram / Lumileds / Nichia or equivalent, and the Unified Glare Rating (UGR) shall be less than 19. The fitting shall be complete in all respects and suitable for operation on 230 V AC, 50 Hz supply. The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 22 | OD264563/2025-2026:Supplying of call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 23 | OD264580/2025-2026:Supply of 1200 mm sweep BEE-5 star rated ceiling fan with brushless direct current motor (BLDC) , class of insulation B , 3 no's blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM (tolerance as per IS :374-2019, THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg Celsius ( maximum) , insulation resistance more than 2 Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as required: |
| 24 | OD264603/2025-2026:Supply of 400 mm sweep wall-mounted fan of approved make, complete with all necessary mounting brackets and accessories, supplied along with the fan. |
| 25 | OD264622/2025-2026:Supply of 250 mm sweep light-duty exhaust fan with plastic body and self-opening louvers, of approved make, complete with all necessary mounting screws, brackets, and accessories, supplied along with the fan, suitable for operation on 230 V AC, single-phase supply. |
| 26 | OD264657/2025-2026:Supply of 300 mm sweep light-duty exhaust fan with metal body/frame, of approved make, complete with all necessary mounting brackets, screws, and accessories, suitable for operation on 230 V AC, single-phase supply. |
| 27 | OD264676/2025-2026:Supply of 450 mm sweep Heavy-duty exhaust fan with metal body/frame, of approved make, complete with all necessary mounting brackets, screws, and accessories, suitable for operation on 230 V AC, single-phase supply. |
| 28 | OD261734/2025-2026:Supply of post top luminaire with the following specification. 1. Nominal Voltage- 240VAC, 2. Power Factor- >=0.95, 3. Colour Temp.(CCT)- 4000-5700K, 4. Color Rendering Index (CRI)-70 to 80, 5. IP66/IP65 and IK07/IK08 protection against water and impact, 6. THD <=10%, 7. Average life of 50000 hours, 8. Minimum efficiency of 100lm per watt, 9. Short circuit, Open circuit, Over Voltage protection, Surge Voltage protection and other safety test as per IS 15885 Part-2/Sec 13, 10. Aluminium housing, 11. Inbuilt driver, 12. Make- Philips Uniscape BGP200 LED35 CW PSU GR CPC SPD or its equivalent. |
| 29 | OD261777/2025-2026:Supply of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV, and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer). The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 30 | OD261778/2025-2026:Supply of 100W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV, and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer). The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 31 | OD261779/2025-2026:Supply of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer). The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 32 | OD261780/2025-2026:Supply of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer). The luminaire shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 33 | OD264881/2025-2026:Supply of electronic key card switch of approved make, suitable for hotel room energy management applications. The key card switch shall be compatible with standard RFID/magnetic hotel key cards and shall be designed to control power supply to room lighting and socket circuits. The switch shall be rated for operation on 230 V AC, 50 Hz single-phase supply and shall be capable of handling a minimum load of 15–16 A. The housing shall be made of high-quality, fire-retardant polycarbonate/ABS material with a durable finish. The switch shall provide delayed OFF function (time delay of approximately 15–30 seconds) after card removal to allow safe exit. The key card switch shall be suitable for flush mounting in standard modular electrical boxes and shall be complete with all necessary wiring terminals, mounting accessories, and faceplate. The device shall ensure reliable operation, long service life, and energy savings by automatic disconnection of room power when the card is removed. The key card switch shall comply with relevant BIS/IEC standards and shall be of approved make, complete in all respects. The electronic key card switch shall be provided with a minimum warranty of three (3) years. The original warranty card and relevant documents shall be submitted to the Officer concerned. |
| 34 | OD264901/2025-2026:Supply of electronic key fob suitable for use with hotel room key card switches / energy management systems. The key fob shall be compatible with the installed key card switch and shall be capable of activating the room power supply when inserted. The key fob shall be made of durable, non-conductive plastic/PVC material, resistant to wear and tear under regular hotel use. It shall be of standard size and thickness suitable for smooth insertion and removal from the key card switch without jamming. The key fob shall be reusable, lightweight, and designed for long service life. It shall be complete in all respects and suitable for hotel, guest house, or similar commercial applications. The key fob shall be of approved make and compatible with the specified key card switch system. |
| 35 | OD265005/2025-2026:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.12 Module |
| 36 | OD265006/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module |
| 37 | OD265007/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module |
| 38 | OD265008/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module |
| 39 | OD265009/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 40 | OD265010/2025-2026:Supply of following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module |
| 41 | OD265011/2025-2026:Supply of fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm) |
| 42 | OD265012/2025-2026:Supply of fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) |
| 43 | OD265013/2025-2026:Supply of fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 44 | OD265014/2025-2026:Supplyof following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) |
| 45 | OD265015/2025-2026:Supply of following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 46 | OD265016/2025-2026:Supplying of following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 47 | OD265063/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 2-module plastic modular box, suitable for surface mounting. |
| 48 | OD265064/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 3-module plastic modular box, suitable for surface mounting. |
| 49 | OD265065/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 4-module plastic modular box, suitable for surface mounting. |
| 50 | OD265066/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 6-module plastic modular box, suitable for surface mounting. |
| 51 | OD265067/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 8-module plastic modular box, suitable for surface mounting. |
| 52 | OD265068/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 9-module plastic modular box, suitable for surface mounting. |
| 53 | OD265069/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 10 to 12-module plastic modular box, suitable for surface mounting. |
| 54 | OD265089/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 5/6 A modular switch. |
| 55 | OD265088/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 2 way 5/6 amps switch |
| 56 | OD265087/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 15/16 A modular switch. |
| 57 | OD265085/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 3 pin 5/6 amp socket outlet |
| 58 | OD265086/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 6 pin 15/16 amp socket outlet |
| 59 | OD265100/2025-2026:Supply of 6 A, 3-pin plug top of approved make, including all necessary terminals, cord grip, and accessories, complete as required. |
| 60 | OD265101/2025-2026:Supply of 16 A, 3-pin plug top of approved make, including all necessary terminals, cord grip, and accessories, complete as required. |
| 61 | OD265102/2025-2026:Supply of 25A 3 pin plug top with indicator, including all necessary fixing screws, connectors, and accessories, complete as required. |
| 62 | OD265103/2025-2026:Supply of 2.25 microfarad (µF) motor run capacitor of approved make, suitable for ceiling fan application, with minimum voltage rating of 440 V AC, complete as required. |
| 63 | OD265104/2025-2026:Supply of 2-module step fan regulator of approved make, including all necessary fixing screws, terminals, connectors, and accessories, complete as required. |
| 64 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 65 | OD265108/2025-2026:Supply of FRLS PVC insulated copper conductor, single-core cable, of the following size, suitable for use in electrical wiring applications, complete as required.a) 1.5 sq. mm copper conductor. |
| 66 | OD265109/2025-2026:Supply of FRLS PVC insulated copper conductor, single-core cable, of the following size, suitable for use in electrical wiring applications, complete as required.a) 2.5 sq. mm copper conductor. |
| 67 | OD265107/2025-2026:Supply of FRLS PVC insulated copper conductor, single-core cable, of the following size, suitable for use in electrical wiring applications, complete as required.a) 4 sq. mm copper conductor. |
| 68 | OD319701/2025-2026:Supplying of four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 69 | OD319704/2025-2026:Supplying of 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 70 | OD319705/2025-2026:Supplying of 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 71 | OD319706/2025-2026:Supplying of following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 72 | OD319707/2025-2026:Supplying of following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 73 | OD319708/2025-2026:Supplying of following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 74 | OD319709/2025-2026:Supplying of following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 75 | OD319710/2025-2026:Supplying of following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 76 | OD319711/2025-2026:Supplying of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way, Double door |
| 77 | OD319712/2025-2026:Supplying of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 78 | Supply of Switch gears |
| 79 | OD265325/2025-2026:Supply of 400 A TP&N disconnector fuse switch unit, complete with all necessary mounting accessories, suitable for installation inside the existing panel board, and including ISI-marked HRC fuse links, as required. |
| 80 | OD265330/2025-2026:Supply of 200 A TP&N disconnector fuse switch unit, complete with all necessary mounting accessories, suitable for installation inside the existing panel board, and including ISI-marked HRC fuse links, as required. |
| 81 | OD265327/2025-2026:Supply of 160 A TP&N disconnector fuse switch unit, complete with all necessary mounting accessories, suitable for installation inside the existing panel board, and including ISI-marked HRC fuse links, as required. |
| 82 | OD265328/2025-2026:Supply of 125 A TP&N disconnector fuse switch unit, complete with all necessary mounting accessories, suitable for installation inside the existing panel board, and including ISI-marked HRC fuse links, as required. |
| 83 | OD265329/2025-2026:Supply of 100 A TP&N disconnector fuse switch unit, complete with all necessary mounting accessories, suitable for installation inside the existing panel board, and including ISI-marked HRC fuse links, as required. |
| 84 | Refilling of Fire Extinguisher |
| 85 | OD261815/2025-2026:Charges for dismantling the existing 4.5 Kg capacity Co2 type fire extinguisher without any damage , refilling to required pressure and installing in the original position etc. complete as required. |
| 86 | OD261814/2025-2026:Charges for dismantling the existing 5 Kg capacity Co2 type fire extinguisher without any damage , refilling to required pressure and installing in the original position etc. complete as required. |
| 87 | OD261813/2025-2026:Charges for dismantling the existing 6 Kg capacity Co2 type fire extinguisher without any damage , refilling to required pressure and installing in the original position etc. complete as required. |
| 88 | OD261812/2025-2026:Charges for dismantling the existing 6.8 Kg capacity Co2 type fire extinguisher without any damage , refilling to required pressure and installing in the original position etc. complete as required. |
| 89 | OD261811/2025-2026:Charges for dismantling the existing 5/6 Kg capacity ABC type fire extinguisher without any damage , refilling to required pressure and installing in the original position etc. complete as required. |
| 90 | OD261816/2025-2026:Charges for dismantling the existing 2 liter capacity Mist type fire extinguisher without any damage , refilling to required pressure and installing in the original position etc. complete as required. |
| 91 | OD261810/2025-2026:Supply and installation of following discharge hose made from rubberized reinforced wire with PVC horn conforming to relevant IS by removing the existing damaged one.DISCHARGE HOSE WITH HORN FOR 4.5 TO 6.8 KG Co2 FIRE EXTINGUISHER-1 Meter |
| 92 | OD261809/2025-2026:Supply and installation of following Braided discharge hose fitted with end connection conforming to relevant IS by removing the existing damaged one.DISCHARGE HOSE FOR 4 TO 6.8 KG ABC/DCP FIRE EXTINGUISHER- 1Meter |
| 93 | OD261808/2025-2026:Supply and installation of following pressure gauge made from mild steel/stainless steel conforming to relevant IS by removing the existing damaged one.ABC Fire extinguisher pressure gauge |
| 94 | OD261871/2025-2026: Charges for Repainting of Fire Extinguishers with instruction label. |
| 95 | OD261870/2025-2026:Charges for Hydraulic Pressure Testing of Fire Extinguishers. |
| 96 | OD261879/2025-2026:Supply of ABC type fire extinguisher of 5/6 kg Capacity complete with initial charges and installation brackets confirming to IS 15683 with ISI mark |
| 97 | Temporary illumination for Independence day |
| 98 | OD263022/2025-2026:Hire and labour charges for Providing and laying decorative LED serial light sets consisting of a minimum of 50 LED lamps per 5 meters, including fixing at designated locations with temporary supports wherever required. The work includes providing necessary electrical connections using suitably rated FRLS copper wire, testing, and ensuring proper functioning of the installation, etc., all complete as directed by the Engineer-in-Charge. - For first Day |
| 99 | OD263023/2025-2026:Hire and labour charges for retaining and maintaining decorative LED serial light sets consisting of a minimum of 50 LED lamps per 5 meters, along with all connected electrical wiring using suitably rated FRLS copper conductor, including necessary servicing, ensuring continuous proper functioning, and attending to faults, if any, etc., complete as directed by the Engineer-in-Charge. For additional day. |
| 100 | OD263029/2025-2026:Hire and labour charges for providing and laying decorative LED strip lights, including fixing at designated locations with temporary supports wherever required, and providing necessary electrical connections using suitably rated FRLS copper wire. The work includes testing and ensuring proper functioning of the installation for the duration of the event, and shall be completed in all respects as directed by the Engineer-in-Charge. For First Day |
| 101 | OD263028/2025-2026:Hire and labour charges for retaining and maintaining the decorative LED strip lighting installed in connection with the event, including ensuring continued proper functioning, attending to any faults, maintaining electrical connections using suitably rated FRLS copper wire, and providing required labour support throughout the extended duration. After completion of the illumination period, the installation shall be safely dismantled and removed, all as directed by the Engineer-in-Charge. For Additional Day |
| 102 | OD263024/2025-2026:Hire and labour charges for providing and fixing LED spike-type spot lights of wattage not less than 30W, including installation at designated locations with necessary temporary supports, providing electrical connections using suitably rated FRLS copper conductor, testing, focusing, and ensuring proper functioning, etc., complete as directed by the Engineer-in-Charge. -For first day. |
| 103 | OD263025/2025-2026:Hire and labour charges for retaining and maintaining LED spike-type spot lights of wattage not less than 30W, including attending to any faults, servicing as required, and ensuring continued proper functioning throughout the illumination period, etc., complete as directed by the Engineer-in-Charge. - For additional day. |
| 104 | OD263027/2025-2026:Hire and labour charges for providing and installing temporary façade lighting using LED PAR / Spot / Flood lights of wattage not less than 100 to 150 W, IP65 or above, outdoor-rated, for the illumination of building façades in connection with the Republic Day Celebrations. The lighting shall be arranged to display the Indian Tricolour theme (Green, White, and Saffron/Orange) appropriately across the building elevations. The scope of work includes the supply and installation of LED lighting fixtures (programmable or fixed PAR/Flood lights in Green, White, and Saffron/Orange), providing necessary electrical connections using suitably rated FRLS copper wire, fixing of lighting fixtures at required locations using clamps, stands, scaffolding, or other suitable arrangements, and testing and focusing to ensure uniform illumination and proper colour distribution. The scope further includes all labour, tools, equipment, transportation, and ensuring safe installation practices, along with complete dismantling and removal of the setup after the event, all as directed by the Engineer-in-Charge. For 1st day. |
| 105 | OD263026/2025-2026:Hire and labour charges for retaining and maintaining the temporary façade lighting arrangements provided during the Republic Day Celebrations, including LED PAR / Spot / Flood lights of wattage not less than 100 to 150 W, IP65 or above, outdoor-rated, arranged to display the Indian Tricolour theme (Green, White, and Saffron/Orange). The scope includes ensuring continued proper functioning of all installed lighting fixtures, attending to any faults, maintaining electrical connections using suitably rated FRLS copper wire, and providing necessary labour, tools, equipment, and safety arrangements for uninterrupted illumination throughout the extended duration. After completion of the illumination period, the setup shall be dismantled and removed in full, as directed by the Engineer-in-Charge. For additional day |
| 106 | Temporary illumination for Republic day |
| 107 | OD263007/2025-2026:Hire and labour charges for Providing and laying decorative LED serial light sets consisting of a minimum of 50 LED lamps per 5 meters, including fixing at designated locations with temporary supports wherever required. The work includes providing necessary electrical connections using suitably rated FRLS copper wire, testing, and ensuring proper functioning of the installation, etc., all complete as directed by the Engineer-in-Charge. - For first Day |
| 108 | OD263008/2025-2026:Hire and labour charges for retaining and maintaining decorative LED serial light sets consisting of a minimum of 50 LED lamps per 5 meters, along with all connected electrical wiring using suitably rated FRLS copper conductor, including necessary servicing, ensuring continuous proper functioning, and attending to faults, if any, etc., complete as directed by the Engineer-in-Charge. For additional day. |
| 109 | OD263014/2025-2026:Hire and labour charges for providing and laying decorative LED strip lights, including fixing at designated locations with temporary supports wherever required, and providing necessary electrical connections using suitably rated FRLS copper wire. The work includes testing and ensuring proper functioning of the installation for the duration of the event, and shall be completed in all respects as directed by the Engineer-in-Charge. For First Day |
| 110 | OD263013/2025-2026:Hire and labour charges for retaining and maintaining the decorative LED strip lighting installed in connection with the event, including ensuring continued proper functioning, attending to any faults, maintaining electrical connections using suitably rated FRLS copper wire, and providing required labour support throughout the extended duration. After completion of the illumination period, the installation shall be safely dismantled and removed, all as directed by the Engineer-in-Charge. For Additional Day |
| 111 | OD263009/2025-2026:Hire and labour charges for providing and fixing LED spike-type spot lights of wattage not less than 30W, including installation at designated locations with necessary temporary supports, providing electrical connections using suitably rated FRLS copper conductor, testing, focusing, and ensuring proper functioning, etc., complete as directed by the Engineer-in-Charge. -For first day. |
| 112 | OD263010/2025-2026:Hire and labour charges for retaining and maintaining LED spike-type spot lights of wattage not less than 30W, including attending to any faults, servicing as required, and ensuring continued proper functioning throughout the illumination period, etc., complete as directed by the Engineer-in-Charge. - For additional day. |
| 113 | OD263012/2025-2026:Hire and labour charges for providing and installing temporary façade lighting using LED PAR / Spot / Flood lights of wattage not less than 100 to 150 W, IP65 or above, outdoor-rated, for the illumination of building façades in connection with the Republic Day Celebrations. The lighting shall be arranged to display the Indian Tricolour theme (Green, White, and Saffron/Orange) appropriately across the building elevations. The scope of work includes the supply and installation of LED lighting fixtures (programmable or fixed PAR/Flood lights in Green, White, and Saffron/Orange), providing necessary electrical connections using suitably rated FRLS copper wire, fixing of lighting fixtures at required locations using clamps, stands, scaffolding, or other suitable arrangements, and testing and focusing to ensure uniform illumination and proper colour distribution. The scope further includes all labour, tools, equipment, transportation, and ensuring safe installation practices, along with complete dismantling and removal of the setup after the event, all as directed by the Engineer-in-Charge. For 1st day. |
| 114 | OD263011/2025-2026:Hire and labour charges for retaining and maintaining the temporary façade lighting arrangements provided during the Republic Day Celebrations, including LED PAR / Spot / Flood lights of wattage not less than 100 to 150 W, IP65 or above, outdoor-rated, arranged to display the Indian Tricolour theme (Green, White, and Saffron/Orange). The scope includes ensuring continued proper functioning of all installed lighting fixtures, attending to any faults, maintaining electrical connections using suitably rated FRLS copper wire, and providing necessary labour, tools, equipment, and safety arrangements for uninterrupted illumination throughout the extended duration. After completion of the illumination period, the setup shall be dismantled and removed in full, as directed by the Engineer-in-Charge. For additional day |
| 115 | Material required for the maintenance of Room Heater, Geyser, Split AC and Kitchen Utensils. |
| 116 | OD265154/2025-2026:Supplying and fixing of 1.5 TR AC compressor, including dismantling and removal of existing damaged compressor, making necessary connections, testing, and commissioning, complete as required and as directed by the Engineer-in-Charge. |
| 117 | OD266699/2025-2026:Supply of indoor blower wheel / fan suitable for split air-conditioning unit of capacity 1.0 TR to 2.0 TR (or as per OEM requirement), of OEM-approved make and design. The blower wheel shall be of forward curved centrifugal type, manufactured from high strength ABS plastic or coated aluminium, dynamically balanced to ensure low noise and vibration during operation. The blower wheel shall have dimensions, pitch, and bore suitable for mounting on the indoor fan motor shaft, with secure locking arrangement as per manufacturers design. The blower wheel shall be resistant to corrosion, deformation, and dust accumulation, and shall be suitable for continuous operation. The item shall be complete in all respects and suitable for reliable and efficient air circulation in the indoor unit of the split air conditioning system. |
| 118 | OD266696/2025-2026:Supply of outdoor fan motor suitable for split air-conditioning unit of capacity 1.0 TR to 2.0 TR (or as per OEM requirement), of OEM-approved make and design. The motor shall be of single-phase induction type with permanently split capacitor (PSC) or BLDC type, as applicable, suitable for operation on 230 V AC, 50 Hz single-phase supply. The motor shall have adequate power rating, speed (typically 850–1100 RPM or as per OEM), and torque suitable for condenser fan application. The motor shall be weather-resistant and suitable for outdoor installation, with Class B insulation or higher, sealed bearings, and thermal protection as per manufacturers design. The motor shall be complete with shaft, mounting brackets, terminal leads, and all necessary fittings, and shall conform to relevant BIS/IEC standards. The item shall be complete in all respects and suitable for reliable and efficient operation of the split AC outdoor unit. |
| 119 | OD266694/2025-2026:Supply of indoor fan (blower) motor suitable for split air-conditioning unit of capacity 1.0 TR to 2.0 TR (or as per OEM requirement), of OEM-approved make and design. The motor shall be of single-phase induction type with permanently split capacitor (PSC) or BLDC type, as applicable, suitable for operation on 230 V AC, 50 Hz single-phase supply. The motor shall have adequate power rating, speed, and torque to match the indoor unit blower, and shall be provided with sealed bearings for quiet operation and long service life. The motor insulation shall be Class B or higher, with thermal protection as per manufacturers design. The motor shall be complete with shaft, mounting arrangement, and terminal leads, and shall conform to relevant BIS/IEC standards. The item shall be complete in all respects and suitable for reliable and efficient operation of the split AC indoor unit. |
| 120 | OD265158/2025-2026:Charges for brazing condenser / evaporator coil / refrigerant pipe, including cutting and cleaning of surface, preparation of joints, brazing with suitable silver/copper alloy rods using oxy-acetylene or LPG torch, testing for leakage using nitrogen or soap solution, re-insulating the repaired portion with proper nitrile insulation, and finishing, complete as required and as directed by the Engineer-in-Charge. |
| 121 | OD265346/2025-2026:Supply of indoor blower fan motor capacitor suitable for 1.5 TR to 2.0 TR split air-conditioning units, of metallized polypropylene (MPP) type, oil-filled or dry type, as recommended by the original equipment manufacturer (OEM). The capacitor shall have capacitance value as per OEM requirement and shall be rated for a minimum voltage of 440 V AC. It shall be suitable for continuous duty operation on 230 V AC, 50 Hz single-phase supply. |
| 122 | OD265343/2025-2026:Supply of condenser fan motor capacitor suitable for 1.5 TR to 2.0 TR split air-conditioning units, of metallized polypropylene (MPP) type, oil-filled or dry type, as recommended by the original equipment manufacturer (OEM). The capacitor shall have capacitance value as per OEM requirement and shall be rated for a minimum voltage of 440 V AC. It shall be suitable for continuous duty operation on 230 V AC, 50 Hz single-phase supply. |
| 123 | OD265344/2025-2026:Supply of compressor run capacitor suitable for split air-conditioning units, of metallized polypropylene (MPP) type, oil-filled or dry type as recommended by the equipment manufacturer, with capacitance value of 50 µF (MFD) conforming to OEM requirements. The capacitor shall have a minimum voltage rating of 440 V AC and shall be suitable for continuous duty operation on 230 V / 50 Hz AC supply. |
| 124 | OD265345/2025-2026:Supply of compressor run capacitor suitable for split air-conditioning units, of metallized polypropylene (MPP) type, oil-filled or dry type as recommended by the equipment manufacturer, with capacitance value of 45 µF (MFD) conforming to OEM requirements. The capacitor shall have a minimum voltage rating of 440 V AC and shall be suitable for continuous duty operation on 230 V / 50 Hz AC supply. |
| 125 | OD260257/2025-2026:Supply and providing the following size soft drawn copper pipe for extending the pipe between out door and indoor unit, including insulating the pipe using rubberized foam sleeve 10mm thick, brazing, leak testing etc.:- 1/4 inch (6.35 mm) and 1/2 inch (12.7 mm) 22 gauge |
| 126 | OD260234/2025-2026:Supply and providing the following size soft drawn copper pipe for extending the pipe between out door and indoor unit, including insulating the pipe using rubberized foam sleeve 10mm thick, brazing, leak testing etc.:- 3/8 inch (9.525 mm) and 5/8 inch (15.875 mm) 22 gauge. |
| 127 | OD266700/2025-2026:Supply of outdoor fan blade (fan leaf) suitable for split air conditioning unit of capacity 1.0 TR to 2.0 TR (or as per OEM requirement), of OEM approved make and design. The fan blade shall be manufactured from high strength ABS plastic, aluminium, or fiber reinforced material, suitably coated or treated to withstand outdoor weather conditions, corrosion, and UV exposure. The fan blade shall be dynamically balanced to ensure smooth, vibration-free, and low noise operation. The blade shall have correct diameter, pitch, number of blades, and bore size suitable for mounting on the condenser fan motor shaft, complete with hub and locking arrangement as per manufacturers specification. The item shall be complete in all respects and suitable for efficient heat rejection and reliable operation of the split AC outdoor unit. |
| 128 | OD260233/2025-2026:Supply of high grade brass or copper alloy flare nut suitable for 1 to 2TR split AC in the place of defective one |
| 129 | OD266701/2025-2026:Supply of high grade brass or copper alloy flare union suitable for 1.0 TR to 2.0 TR split air-conditioning units, in replacement of the defective flare union, complete as required. |
| 130 | OD266703/2025-2026:Supply of Schrader valve (core) and valve cap manufactured from high grade brass or copper with compatible elastomer sealing, suitable for use with refrigerants in split air conditioning units of capacity 1.0 TR to 2.0 TR. The valve core and cap shall be suitable for installation on service ports, capable of withstanding system operating pressures, and shall ensure leak proof protection against refrigerant leakage, dust, and moisture, complete as required. |
| 131 | OD260242/2025-2026:Supply and installation temperature sensor (Room / condenser / Coil ) suitable for 1.5/2.0 TR split AC in the place of defective one . |
| 132 | OD260250/2025-2026:Supply and install PCB board suitable for 1.5/2.0 TR split AC in the place of defective one. |
| 133 | OD265163/2025-2026:Charges for supply and filling sufficient quantity of R32/R22 gas for existing air conditioner unit including leak testing rectifying the defects leak arresting including brazing and make the compressor in good working condition for the following Air conditioner units. 1TR/1.5TR/2TR/3TR |
| 134 | OD265463/2025-2026:Charges for filling sufficient quantity of R-410/R-410A refrigerant for air-conditioning unit, including leak testing, leak arresting, brazing if required, and making the unit fully operational, complete as required and as directed by the Engineer-in-Charge. |
| 135 | OD260256/2025-2026:Dismantling of PCB board of voltage stabilizer and refitting after necessary repairs. |
| 136 | OD260220/2025-2026:Supply and Fixing of 5 KVA voltage stabilizer for split type A/C unit with voltage range of 170V-270V andout put range of 210 - 240V V Guard/voltas or its equivalent |
| 137 | OD260229/2025-2026:Supply and laying of Drain Pipe (PVC) 1” Insulated Wire Mesh. |
| 138 | OD260255/2025-2026:Supply and providing rubberized foam sleeve 10mm thick over existing piping between indoor and outdoor unit of AC unit. |
| 139 | OD260245/2025-2026:Supply & providing IR remote for split A/C unit (Blue star / Voltas /Equivalent). |
| 140 | OD265148/2025-2026:Supply of LED indicators for all voltage ranges - Red, Green, Black, Yellow, Orange Colour. |
| 141 | OD266580/2025-2026:Supply of electric heating element suitable for use in storage-type or instant water boiler, of OEM-approved design. The heating element shall be manufactured from stainless steel / copper / Nichrome material with corrosion-resistant finish, suitable for continuous operation in water/boiler environment. The element shall have a rated capacity of 2000 W to 3000 W (or as per OEM requirement) and shall be suitable for operation on 230 V AC, 50 Hz single-phase supply. The heating element shall be complete with proper terminals, gasket/sealing arrangement, and mounting provisions, and shall conform to relevant BIS/IEC standards. The item shall be complete in all respects and suitable for reliable and safe operation. |
| 142 | OD266604/2025-2026:Supply of regulator-type switch suitable for controlling the heating element of electric water boiler, of OEM-approved make and design. The regulator shall be of heavy-duty rotary/step type, suitable for continuous operation, and shall have a current rating adequate for boiler heating element load (not less than 16 A, or as per OEM requirement). The regulator switch shall be suitable for operation on 230 V AC, 50 Hz single-phase supply and shall provide multiple step/variable control of temperature or power output. The regulator shall be manufactured from heat-resistant and flame-retardant insulating material, with robust contacts suitable for high current operation. The item shall be complete with knob, terminals, mounting arrangement, and all necessary fixing accessories, and shall conform to relevant BIS/IEC standards. The regulator shall be suitable for reliable and safe operation of the water boiler. |
| 143 | OD265461/2025-2026:Supply of electric heating element suitable for storage-type water geysers of 15 to 25 liter capacity. The heating element shall be constructed of copper, stainless steel, or Nichrome, with corrosion-resistant coating suitable for continuous immersion in water. The element shall be designed for operation on 230 V AC, 50 Hz single-phase supply. |
| 144 | OD265151/2025-2026:Supply of capillary type thermostat suitable for 5 to 100 litre storage water heaters, 230 V AC, adjustable temperature range 30°C to 85°C (approx.), with high-limit safety cut-out, suitable for heating elements up to 3 kW, including necessary fixing arrangements as required. |
| 145 | OD265323/2025-2026:Supply of vertical, semi-digital, storage-type electric water geyser of 15-litre capacity, suitable for operation on 230 V AC, 50 Hz, single-phase supply and rated for 2000 to 3000 W heating capacity. The geyser shall be provided with a semi-digital control panel for temperature indication and adjustment, with an operating temperature range up to approximately 75°C. The inner tank shall be of corrosion-resistant material suitable for hard water conditions and designed to withstand a minimum working pressure of 8 bar. The outer body shall be of durable, rust-resistant material with an aesthetically finished enclosure suitable for bathroom installation. The geyser shall be suitable for vertical wall mounting and shall be complete with all standard accessories including mounting brackets, inlet and outlet connections, pressure relief valve, thermostat, and automatic thermal cut-out. The appliance shall conform to relevant BIS/IEC standards and shall be provided with all requisite safety features. The geyser shall carry a minimum manufacturer’s warranty of three (3) years, and the contractor shall submit the original warranty card and all related documents to the Officer concerned/Engineer-in-Charge after supply or installation, whichever is earlier. |
| 146 | OD265149/2025-2026:Supply of fan leaf (fan blade) suitable for room heater blower motor, heat-resistant, dynamically balanced, with proper shaft mounting arrangement complete. |
| 147 | OD265150/2025-2026:Supply of fan motor for ordinary room heater suitable for wide-range input operation on 100 to 240 V AC, 50/60 Hz supply, ensuring compatibility with fluctuating mains conditions. The motor shall be of single-phase induction type with copper wire winding for improved efficiency, better thermal performance, and enhanced reliability. It shall be designed as a low-RPM blower motor to ensure smooth airflow with minimal noise and vibration, incorporating a dynamically balanced rotor. The motor shall be suitable for continuous duty operation in equipment such as incubators, air fresheners, humidifiers, and room heaters where stable air circulation is essential. The mechanical construction shall be robust and compact with high-temperature resistant insulation materials compliant with relevant electrical safety standards. The motor shall be provided with suitable mounting arrangements and connection leads for easy installation and maintenance. The blower assembly shall deliver uniform airflow, making it suitable for domestic and industrial ventilation/heating applications. |
| 148 | OD265152/2025-2026:Supply of heating element for the ordinary room heater shall have a power rating of 3000 Watts and shall be suitable for operation on 230 V AC supply, designed to deliver effective space heating. The element shall be made of high-quality resistance heating alloy, preferably Nichrome (NiCr 80/20 or equivalent), capable of withstanding continuous high-temperature operation without deformation or significant resistance change. The nominal resistance of the heating element shall be designed to achieve the rated power output at the specified voltage, ensuring stable performance and quick heat response. The element shall be formed into a coil with appropriate turn spacing and mounted on a high-temperature insulating support such as ceramic or mica, providing proper mechanical strength and electrical insulation. The construction shall ensure free air circulation around the coil for efficient heat dissipation and longer service life. The heating element shall include suitable terminals for electrical connection and shall be capable of safe operation under varying environmental conditions typically encountered in domestic heater applications. |
| 149 | OD265153/2025-2026:Supply of heating element for the ordinary room heater shall have a power rating of 2500 Watts and shall be suitable for operation on 230 V AC supply, designed to deliver effective space heating. The element shall be made of high-quality resistance heating alloy, preferably Nichrome (NiCr 80/20 or equivalent), capable of withstanding continuous high-temperature operation without deformation or significant resistance change. The nominal resistance of the heating element shall be designed to achieve the rated power output at the specified voltage, ensuring stable performance and quick heat response. The element shall be formed into a coil with appropriate turn spacing and mounted on a high-temperature insulating support such as ceramic or mica, providing proper mechanical strength and electrical insulation. The construction shall ensure free air circulation around the coil for efficient heat dissipation and longer service life. The heating element shall include suitable terminals for electrical connection and shall be capable of safe operation under varying environmental conditions typically encountered in domestic heater applications. |
| 150 | OD265156/2025-2026:Servicing, defrosting, and refrigerant top-up of double/single door refrigerator of capacity up to 300 liters, including thorough cleaning of condenser and evaporator coils, interior and exterior surfaces; removal of accumulated frost and ice; checking, tightening, and rectification of electrical connections; checking and adjustment of refrigerant charge, thermostat, and controls; testing for proper cooling performance; and ensuring satisfactory and efficient operation, complete as required and as directed by the Engineer-in-Charge. |
| 151 | OD266552/2025-2026:Servicing, defrosting, and refrigerant top-up of deep freezer of capacity up to 500 liters, including thorough cleaning of condenser and evaporator coils; cleaning of interior and exterior surfaces; removal of accumulated frost and ice; checking, tightening, and rectification of electrical connections; checking and adjustment of refrigerant charge strictly as per OEM specifications; checking thermostat, defrost system, door gasket, and controls; testing for proper cooling performance and temperature uniformity; and ensuring satisfactory and efficient operation, complete as required and as directed by the Engineer-in-Charge. |
| 152 | OD265462/2025-2026:Supply of electric heating element suitable for use in commercial or domestic coffee-making machines, of OEM-approved design. The heating element shall be constructed of stainless steel or copper with corrosion-resistant coating, suitable for continuous operation in water or boiler environment. The element shall have a rated power output of 2000 to 3000 W and shall be suitable for operation on 230 V AC, 50 Hz single-phase supply |
| 153 | OD260226/2025-2026:Supply of battery water |
| 154 | Servicing of 80kW Hot water Generator. |
| 155 | OD267865/2025-2026:Servicing and repairing of 80 kW electric hot water generator, complete, including inspection, fault diagnosis, cleaning, testing, adjustment, and rectification of defects to restore the system to safe and efficient operating condition. The work shall include isolation of electrical supply, opening of access panels, and thorough cleaning of heating elements, internal water chamber, and accessible heat transfer surfaces by removal of scale, sediment, and deposits using approved mechanical and/or chemical methods.All electrical components such as heating elements, contactors, relays, MCBs/MCCBs, terminal blocks, control wiring, thermostats, temperature sensors, control panel components, indication lamps, and safety interlocks shall be inspected. Loose connections shall be tightened, defective wiring lugs replaced, and malfunctioning controls adjusted or reset. Insulation resistance of heating elements and power circuits shall be tested with a calibrated megger, and continuity tests shall be carried out as required.Hydraulic and mechanical components including inlet and outlet valves, circulation pump (if provided), strainers, gaskets, expansion tank (where provided), and pressure relief valve shall be checked and cleaned. Minor leakages shall be rectified by replacement of gaskets, seals, or fasteners as required. Safety devices such as thermostat, high temperature cut out, pressure relief valve, and interlocks shall be checked and tested for correct operation. The item includes attending minor repairs such as replacement of damaged terminals, control wiring, contactors, relays, thermostats, sensors, gaskets, and similar small components. Cost of major spares such as heating elements, control panels, pumps, or major electrical assemblies shall be measured and paid for separately, unless otherwise specified. After completion of servicing and repairs, the hot water generator shall be test run under normal operating conditions to verify correct temperature rise, stable operation, absence of abnormal noise, overheating, electrical faults, or leakages. All works shall be carried out by qualified electrical personnel in accordance with manufacturers recommendations, relevant IS/IEC standards, safety regulations, and statutory requirements, complete as required and as directed by the Engineer in Charge. |
| 156 | OD267866/2025-2026:Supply, fixing, and testing of 18 kW flange type immersion heating element suitable for electric hot water generator, designed for operation on 415 V AC, 50 Hz, three-phase supply, complete with all accessories as required. The immersion heater shall be of robust industrial design, comprising tubular heating elements made of Incoloy / stainless steel / copper (as recommended by OEM), suitable for continuous duty and hot water applications. The heater shall be mounted on a mild steel / stainless steel flange, suitable for the existing hot water generator, complete with matching gasket, bolts, nuts, and washers. The heating element shall be rated for 18 to 20 kW total capacity, with uniform heat distribution and adequate insulation to prevent overheating. The assembly shall be capable of withstanding normal operating temperature and pressure conditions of the hot water generator.The work shall include disconnecting electrical connections, draining water as required, removal of the defective immersion heater, supply and installation of new heater, refilling, electrical reconnection, insulation resistance testing, earthing continuity check, and trial run to ensure satisfactory and safe operation. The heater shall conform to relevant IS / IEC standards. The item is complete in all respects and as directed by the Engineer-in-Charge. |
| 157 | OD267867/2025-2026:Supply, fixing, testing, and commissioning of step controller set consisting of 12 V Switching Mode Power Supply (SMPS), 8-step step controller relay card, and step controller display unit, suitable for 80 kW electric hot water generator, for staged control of heating elements to ensure efficient, safe, and reliable operation, complete as required. The step controller shall be of industrial-grade design, suitable for operation on 415 V AC, 50 Hz, three-phase supply, and shall be capable of controlling multiple heating stages corresponding to the installed heating element configuration of the hot water generator. The controller shall provide automatic sequential switching ON/OFF of heating elements based on temperature demand and load conditions, thereby reducing electrical stress on components and improving energy efficiency. The item shall include integration with existing temperature sensors/thermostats, interlocking with safety devices such as thermal cut-outs, and provision of proper earthing arrangements. The work shall include removal of the existing/defective step controller, if any; supply, installation, wiring, and termination of the new step controller set; testing of individual heating stages; functional testing under load; and trial run to ensure correct sequential operation and satisfactory performance. The step controller shall be of approved make, conforming to relevant IS / IEC standards, and the item shall be complete in all respects and as directed by the Engineer-in-Charge. |
| 158 | OD267885/2025-2026:Supply and fixing of DIN-rail mounted 32 A, 3 pole power Contactors, AC 3 rating at 415 V, with AC Coil, Auxiliary contacts, 1 NO/INC in the existing panel, including all necessary interconnections, control wiring, accessories, ferruling, termination and making good the connections, complete as required and as directed by the Engineer-in-Charge. |
| 159 | OD267889/2025-2026:Supply of capillary / electronic type thermostat suitable for hot water generator, 230 V AC, adjustable temperature range 30°C to 85°C (approx.), with high-limit safety cut-out, suitable for heating elements up to 20 kW, including necessary fixing arrangements as required. |
| 160 | OD267896/2025-2026:Supply, fixing, testing, and commissioning of temperature sensor suitable for 80 kW electric hot water generator, complete as required. The temperature sensor shall be of industrial-grade construction, suitable for continuous operation in hot water generator applications. The sensor may be of PT100 (RTD) / NTC thermistor / thermocouple (Type K or J), as required to match the existing control system, temperature controller, or step controller of the hot water generator. The sensor shall be suitable for operation over a temperature range of 0°C to at least 120°C (or higher as required) and shall be designed for immersion or surface mounting as per the existing arrangement. The sensing element shall be housed in a stainless steel sheath with appropriate probe length and diameter, suitable for withstanding operating temperature and pressure conditions. The item shall include compatible cable leads / terminals / connectors, proper sealing arrangement to prevent leakage, and shall be suitable for operation on 415 V AC, 50 Hz, three-phase system through the associated control circuitry. The work shall include removal of the defective sensor (if any), supply and installation of the new sensor, termination, calibration check, integration with existing controller, testing for accurate temperature indication and control response, and trial run to ensure satisfactory performance. The temperature sensor shall be of approved make, conforming to relevant IS / IEC standards, and shall be complete in all respects and as directed by the Engineer-in-Charge. |
| 161 | Electrical items for staff quarters. |
| 162 | OD317194/2025-2026:Supply of FRLS PVC insulated copper conductor, single-core cable, of the following size, suitable for use in electrical wiring applications, complete as required.a) 4 sq. mm copper conductor. |
| 163 | OD317195/2025-2026:Supply of FRLS PVC insulated copper conductor, single-core cable, of the following size, suitable for use in electrical wiring applications, complete as required.a) 2.5 sq. mm copper conductor. |
| 164 | OD317196/2025-2026:Supply of FRLS PVC insulated copper conductor, single-core cable, of the following size, suitable for use in electrical wiring applications, complete as required.a) 1 × 1.5 sq. mm copper conductor. |
| 165 | OD317197/2025-2026:Supply of 2.25 microfarad (µF) motor run capacitor of approved make, suitable for ceiling fan application, with minimum voltage rating of 440 V AC, complete as required. |
| 166 | OD317198/2025-2026:Supply of 2-module step fan regulator of approved make, including all necessary fixing screws, terminals, connectors, and accessories, complete as required. |
| 167 | OD317199/2025-2026:Supply of 6 A, 3-pin plug top of approved make, including all necessary terminals, cord grip, and accessories, complete as required. |
| 168 | OD317200/2025-2026:Supply of 16 A, 3-pin plug top of approved make, including all necessary terminals, cord grip, and accessories, complete as required. |
| 169 | OD317201/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 3 pin 5/6 amp socket outlet |
| 170 | OD317202/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 6 pin 15/16 amp socket outlet |
| 171 | OD317203/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 15/16 A modular switch. |
| 172 | OD317204/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 2 way 5/6 amps switch |
| 173 | OD317205/2025-2026:Supply of the following modular switches/sockets, including all necessary fixing screws, connectors, and accessories, complete as required.a) 5/6 A modular switch. |
| 174 | OD317206/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 2-module plastic modular box, suitable for surface mounting. |
| 175 | OD317207/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 3-module plastic modular box, suitable for surface mounting. |
| 176 | OD317208/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 4-module plastic modular box, suitable for surface mounting. |
| 177 | OD317209/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 6-module plastic modular box, suitable for surface mounting. |
| 178 | OD317210/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 8-module plastic modular box, suitable for surface mounting. |
| 179 | OD317211/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 9-module plastic modular box, suitable for surface mounting. |
| 180 | OD317212/2025-2026:Supply of the following types and sizes of boxes suitable for modular accessories, for surface or recessed mounting, including all necessary fixing screws and accessories, RoHS compliant.a) 10-module plastic modular box, suitable for surface mounting. |
| 181 | OD317213/2025-2026:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.12 Module |
| 182 | OD317214/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module |
| 183 | OD317215/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module |
| 184 | OD317216/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module |
| 185 | OD317217/2025-2026:Supply of fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 186 | OD317218/2025-2026:Supply of following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module |
| 187 | OD317219/2025-2026:Supply of fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm) |
| 188 | OD317220/2025-2026:Supply of fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) |
| 189 | OD317221/2025-2026:Supply of fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 190 | OD317222/2025-2026:Supplyof following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) |
| 191 | OD317223/2025-2026:Supply of following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 192 | OD317224/2025-2026:Supply of 250 mm sweep light-duty exhaust fan with plastic body and self-opening louvers, of approved make, complete with all necessary mounting screws, brackets, and accessories, supplied along with the fan, suitable for operation on 230 V AC, single-phase supply. |
| 193 | OD317225/2025-2026:Supply of 1200 mm sweep BEE-5 star rated ceiling fan with brushless direct current motor (BLDC) , class of insulation B , 3 no's blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM (tolerance as per IS :374-2019, THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg Celsius ( maximum) , insulation resistance more than 2 Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as required: |
| 194 | OD317226/2025-2026:Supplying of call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 195 | OD317227/2025-2026:Supplying of PVC batten/ angle holder including connection etc. as required. |
| 196 | OD317253/2025-2026:Supply of electric heating element suitable for storage-type water geysers of 15 to 25 liter capacity. The heating element shall be constructed of copper, stainless steel, or Nichrome, with corrosion-resistant coating suitable for continuous immersion in water. The element shall be designed for operation on 230 V AC, 50 Hz single-phase supply. |
| 197 | OD317256/2025-2026:Supply of capillary type thermostat suitable for 5 to 100 litre storage water heaters, 230 V AC, adjustable temperature range 30°C to 85°C (approx.), with high-limit safety cut-out, suitable for heating elements up to 3 kW, including necessary fixing arrangements as required. |
| 198 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 199 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 200 | OD317261/2025-2026:Supply of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS.a) 225 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C. |
| 201 | OD317262/2025-2026:Supply and fixing 3 pin,6 Amps ISI marked Ceiling rose |
| 202 | OD317263/2025-2026:Supply of vertical, semi-digital, storage-type electric water geyser of 15-litre capacity, suitable for operation on 230 V AC, 50 Hz, single-phase supply and rated for 2000 to 3000 W heating capacity. The geyser shall be provided with a semi-digital control panel for temperature indication and adjustment, with an operating temperature range up to approximately 75°C. The inner tank shall be of corrosion-resistant material suitable for hard water conditions and designed to withstand a minimum working pressure of 8 bar. The outer body shall be of durable, rust-resistant material with an aesthetically finished enclosure suitable for bathroom installation. The geyser shall be suitable for vertical wall mounting and shall be complete with all standard accessories including mounting brackets, inlet and outlet connections, pressure relief valve, thermostat, and automatic thermal cut-out. The appliance shall conform to relevant BIS/IEC standards and shall be provided with all requisite safety features. The geyser shall carry a minimum manufacturer’s warranty of three (3) years, and the contractor shall submit the original warranty card and all related documents to the Officer concerned/Engineer-in-Charge after supply or installation, whichever is earlier. |
| 203 | OD319713/2025-2026:Supplying of 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 204 | OD319714/2025-2026:Supplying of following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 205 | OD319715/2025-2026:Supplying of following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 206 | OD319716/2025-2026:Supplying of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 207 | 90.12.41.3:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 10 sq mm with factory made clamp Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
| 9 | Click here to download tender document | Tender Documents |
| 10 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
