Tender For Major Repairs At Boys Middle School Inderkote Ward No. 10.
Tender Value
3.38 Lakhs
Estimated cost
Bid Submission
01 Jun 2026
0 days left
EMD
6760
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sumbal → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Major Repairs At Boys Middle School Inderkote Ward No. 10.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 2 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 3 | Providing ridges or hips of width 30cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 4 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below and refixing the same |
| 5 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 6 | Brick work with common burnt clay (non modular) bricks claas designation 75 in in superstructure above plinth level upto floor five level including curing in 1:6 cement mortar |
| 7 | Proving and fixing imported wood glazed shutters for windows and clerestory windows excl. glass panes including ISI mark bright finished butt hinges with necessary screws (30 mm thk) |
| 8 | P/F of 12 mm thick marin plywood conforming to IS:710 for ceiling with 50x50mm cornice and beeding complete job |
| 9 | P/F of wooden joists using imported timber complete job |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Proving and applying of 2mm thick white cement based putty on surfaces to prepare the surface even and smooth |
| 12 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work |
| 13 | Applying priming coat on new wood and wood based surface with ready mixed wood primer |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces |
| 15 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 16 | 12mm thick internal cement plaster 1:4 (1 Cement:4 fine sand) on all surfaces (walls, ceiling and RCC surfaces) after proper combing including cost of all material & curing. |
| 17 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in 1:4:8 or leaner mix (i/c equivalent design mix) |
| 18 | Providing and laying of soling stone on level (hand packed) watering ramming complete |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level. M-7.5 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size crushed |
| 20 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 21 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 22 | Carriage of materails By Mech.Transport, from source to site of work: Stone agg. from for an avg lead of 15 km |
| 23 | Sand from for an avg lead of 5 km |
| 24 | Bricks from for an avg lead of 50 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
May 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJun 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender