|
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces, depth not exceeding 100mm deep and area not exceeding 400sqm, stacking the serviceable material at site and removing the surplus material to a distance not exceeding 50m complete all as specified and directed. |
| 2 | Providing premix bituminous macadam (consolidated thickness 75mm or less) with 4% binder content of paving bitumen by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 tonne power roller, complete all as specified and directed. |
| 3 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 5 kg per 10 sq metre of road surface, laying bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% bitumen binder content by weight of total mix using as per table 500-15 of Morth, rolled and compacted to required camber and gradient with 8 to 12 tonne vibrator power roller, complete all as specified and directed. Note:- (i) Bituminous premix semi dense asphaltic concrete shall be mixed in automatic temperature controlled hot mixing plant, transported and premix carpet shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller. |
| 4 | Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 5 | Cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 6 | Solar cat eye (Solar Stud) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed |
| 7 | Preparing bituminous/concrete surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements using hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 mixed with radium glass beads @ 250gm/ Sqm with special applicator machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying) including cleaning the surface of all dirt, dust and other foreign material complete all as specified. Note:- Road marking lines at the centre of road shall not be continuous, whereas the lines at outer sides of road shall be continuous i.e in one length. |
| 8 | Convex Mirror , 800 mm dia made of finest Quality ABS and Poly-carbonate sheet Material, fixed on and including Pole 2 Meter long and 75 mm Diameter MS post powder coated, having 130 Degree of Vision angle , fixed with help of Clamp with post. , complete all as specified and directed. |
| 9 | Convex Mirror , 600 mm dia made of finest Quality ABS and Poly-carbonate sheet Material, fixed on and including Pole 2 Meter long and 75 mm Diameter MS post powder coated, having 130 Degree of Vision angle , fixed with help of Clamp with post. , complete all as specified and directed. |
| 10 | Dual coloured type PVC speed breaker of size 350 X 250 X 50 mm with twin reflector both sides complete all as specified. Make: 3M, SHAKTI, DARKEYE. |
| 11 | Manufacturing, supplying and fixing retroreflective Mandatory/ Regulatory rectangular sign boards of size 900mm x 600mm , made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols andborders etc. as per IRC ; 67:2001, pasted onsubstrate by an adhesive backing which shallbe activated by applying heat and pressureconforming to class -2 of ASTM-D-4956-01 andfixing the same with suitable sized aluminiumalloy rivets @ 20 cm c/c to back support frameof M.S. angle iron of size 25x25x3 mm alongwith theft resistant measures, mounted andfixed with 2 Nos. M.S. angles of size 35x35x5mm to a vertical post made up to M.S. Teesection ISMT 50x50x6 mm welded with baseplate of size 100x100x5 mm at the bottom endand including making holes in pipes, anglesflats, providing & fixing M.S. message plate ofrequired size, steel work to be painted with twoor more coats of synthetic enamel paint ofrequired shade and of approved brand &manufacture over priming coat of zincchromate yellow primer (vertical MS-Teesupport to be painted in black and whitecolours).Backside of aluminium sheet to bepainted with two or more coats of epoxy paintover and including appropriate priming coatincluding all leads and lifts etc. complete asper drawing , specification and direction ofEngineer-in-charge. |
| 12 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory rectangular sign boards of size 1500mm x 900mm , made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with baseplate of size 100x100x5 mm at the bottom endand including making holes in pipes, anglesflats, providing & fixing M.S. message plate ofrequired size, steel work to be painted with twoor more coats of synthetic enamel paint ofrequired shade and of approved brand &manufacture over priming coat of zincchromate yellow primer (vertical MS-Teesupport to be painted in black and whitecolours).Backside of aluminium sheet to bepainted with two or more coats of epoxy paintover and including appropriate priming coatincluding all leads and lifts etc. complete asper drawing , specification and direction ofEngineer-in-charge. |
| 13 | High intensity retro reflective conspicuity radium tape , 100 mm wide , fixed on edges of risers , treads, parapet , wall , tree girth, sign boards, and any type of post , complete all as specified and directed. |
| 14 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 20 of tender doucments. Please Enable Macros to View BoQ information |
