|
| 1 | A - CIVIL WORK |
| 2 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 3 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete |
| 4 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. |
| 5 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materials out side etc. carefully and throwing out the refusal outside etc. complete. |
| 6 | Providing Second Class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 7 | Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc.complete. |
| 8 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm of 8 to 10 mm thickness and confirming IS:15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring. |
| 9 | Providing and laying ceramic tiles having size 30 cm x 60 cm confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing etc. complete. |
| 10 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish. A) For Door Frame & Window Frame. |
| 11 | Providing and applying wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. |
| 12 | Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc.complete as directed |
| 13 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface and applying wall putty. (Excluding primer coat) etc. complete. |
| 14 | Providing and applying one coat of seal cement primer of approved manufacture and shade including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. |
| 15 | Providing & fixing factory made door / window frames of required colour made with wood polymer composite (WPC) extruded internal ribbed sections conforming to American Society for testing and materials (ASTM) in regard with density, tensile strength, flexural strength, Izod impact, water absorption and screw withdrawl stregth with wall thickness of 5 mm (+/- 1 mm) and with frames having mitred joints at each corner, joined together by two nos. of 10 x 8mm & 40mm long PVC dovetail keys including hard wood piece support along the full verticla and horrizontal length in rebate portion hole for fixing hinges and fixtures and the frames fixed to walls / columns with 15mm long dash fastners / holdfasts etc. complete as per the directions of Engineer in charge, with prior approval of concerned Superintending Engineer. (Profile Size 100 x 50 mm with 32 x 12 mm rebate). |
| 16 | Providing and fixing 30 mm thick 100% solid WPC (Wood Ploymer Composite) both side decorative / laminate flush door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade). Calcium Carbonate and natural fibres (wood powders / rice husk / wheat husk) and non toxic additives, made from extrusion process WPC foam sheet. Single Extruded (Inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) and 1100 N (Edge), Min Compressive of 50 N/mm2, Modulus of Elasticity 850 N/MM2 and resistance of spread of flame of Class A category with property of being Termite / Borer free. Water / Misture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thickness of approved design pasted on both faces of shutter and fixing SS hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer-In-Charge. |
| 17 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5mm thick sheet glass louvers of approved quality etc. complete. |
| 18 | Urinal Partition - Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish. A) For Door Frame & Window Frame. |
| 19 | B - SANITARY FIXTURES |
| 20 | Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. |
| 21 | Waterproofing Treatment to new Toilet / bathroom by using Polymeric Cementitious Membrane as approved by Engineer-in-charge, followed by 112 mm thick brick bat coba covered with 20 mm mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honey combs and identified badpatches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2 - (methoxycarbonyl) - 1- propene Butyl - 2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 mm average thicknes of brickbat coba in cement mortar 1:5 over 12mm thick CM 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer-in-charge per 50Kg bag of cement and finishing with 20mm thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kg bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bellmouth including watta, beveled or champhered portion at the junction of wall and work upto a height of 300 mm or as directed and including finishing the top layer of waterproofing treatement with false marking of 30cmx30cm or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing Coating for Concrete and Masonry should have following minimum properties: 1) Elongation % (ASTMD412-2016) : @ 100% 2) Tensile Strength N/mm2 (ASTM D412-2016) : 3.33) Specific Gravity: 1.02±0.02 4) Total Solids (ASTMD 1644 2012): 43.98 5) Hardness Shore A (ASTM D2240-2015): 82 |
| 22 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall, 100 mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. |
| 23 | Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100 mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge. |
| 24 | Providing and fixing oval type under counter wash hand basin of 16 in ch x 22 inch size and of special colour shade having telephonic black / coloured granite of 18 mm thick stone black kadappa framework including chromium plated coupling bottle Trap using oval type wash basin as per detailed drawing or as directed by Engineer-in-charge etc complete. (Counter size1.20m x 0.60 m ) |
| 25 | Providingand fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5liters capacity with fitting, inlet pipes and stop tap,brackets for fixing the cistern, 32 mmdia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection upto the out side face of the wall |
| 26 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5l iters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 27 | Providing and fixing Autoclosing pillar cock of pressmatic tap of approved make or equivalent including all fixtures, fittings etc. complete. |
| 28 | Providing and fixing C.P. Two way Bib cock of approved make continental including necessary sockets/union nut etc. complete. |
| 29 | Providing and fixing C.P. Bib cock with wall flange of approved make including necessary sockets/ union nut etc. complete. |
| 30 | Providing and fixing push cock (Self closing tap) symet type of 20 mm dia. including necessary socket, testing etc. complete |
| 31 | Providing & fixing C. P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C. P. holder for hand spray complete in all respects. |
| 32 | Providing, laying and fixing Jointing Eco-drain 110 mm SN 8 Nu-Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler etc. jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 33 | Providing and fixing 75mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and withnecessary fixtures and fitting suchas bends, tees, single junctions, slottedvent, clamps etc. complete |
| 34 | Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 35 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 36 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. Please Enable Macros to View BoQ information |
