|
| 1 | Providing and fixing Structural glazing work with toughenedglass of 6mm thick and reflective colour as approved in darkshade like Blue/Dark Blue etc. with frame work of curtainsection 65x60mm (Weight 1.64 kg/m min.) made ofaluminium with chrome plating. Internal frame work will alsobe of curtain section 65x60mm of chrome plated aluminiumsection with20x20mm aluminium tube section and structuralspacer made of rubber. The aluminium frame work size as perinstruction of Engineer-in-charge and including openablepanels with all necesary sections and fitting.The work includesilicon structural adhesive for complete gripping of glass withframing members and silicon weather seal sealant to preventmoisture/water through joints. Glass will be fixed in plumband with uniform spacing of 10-12mm wide duly filled withsilicon weather seal sealant. The work includes alllabour,scaffolding , structural aluminium work, toughenedglasses,silicon weather seal sealant, silicon structural adhesivestructural spacer, all accessories like handles, peg stays, M-15grade cement concrete for fixing holdfast .(Face area of glassshall be measured) |
| 2 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with PVS / neoprenegasket etc. complete as per the architectural drawings and thedirections of engineer-in-charge.(Cost of aluminium snapbeading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not lessthan 13.50 kg/sqm) |
| 3 | Providing and fixing aluminum work for doors ,windows,ventilators and partition with extruded built up standardtubular / appropriate Z sections and other sections of approvedmake conforming to IS :733 and IS :1285, fixed with rawlplugs and screws or with fixing clips ,or with expansion holdfasteners including necessary filling up of gap. at junctions , attop ,bottom and sides with required PVC/neoprene felt etc.Aluminium section shall be smooth ,rust free, straight ,miteredand jointed mechanically wherever required including cleatangle Aluminium snap beading for glazing /paneling , C.P.brass/ stainless steel screws Al. Tower bolt & Al. handle & Al.Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling tobe paid for separately). For fixed portion Anodised aluminum (anodised transparent 81 dyed to requiredshade according to IS : 1868. (Minimum anodic coating ofgrade AC 15, Anodizing to be got done from approvedAnodizer) |
| 4 | CEMENT PLASTER Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . |
| 5 | Providing Solid PVC false Ceiling consisting of 600mm x600mm, 5mm (±0.25) thick Plain embossed PVC sheet ofDensity 600 Kg /Cbm Manufactured by an ISO-9001-2015certified Company, used as panel insert in a frame work madeusing powder coated aluminum T- section of sizes 1” x1”(25x25mm, 19 gauge or 1mm thick ) in square pattern ofgrid sizes of 2‟x2‟( 600x600mm ). The aluminum frameworkis supported from the ceiling with the help of 'J' hook and G.I.wire / 6mm M.S. rods of required sizes to maintain properlevel etc. The aluminum framework is supported on side wallwith the use of aluminum L-section of size 1”x1” ( 25x25mm) angles etc. Complete as per direction of Engineer-In-charge,manufacturer‟s specification & drawing. |
| 6 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Short point (up to 3 mtr.) |
| 7 | Medium point (up to 6 mtr.) |
| 8 | Long point (up to 10 mtr..) |
| 9 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Short point (up to 3 mtr.) |
| 10 | Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works with Galvanized box of 1.2 mm thick with earth terminal with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet making connection , testing , etc. as required. . For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 11 | Providing and fixing fully panelled /partly panelled doubleleaf shutters frame for windows and ventilators as perapproved design and drawings with approved steel fittings asper Annexure „A‟ and width of styles, bottom and top rails75mm including intermediate rails 50mm wide, beading of25mm x 15mm size on both faces :30 mm thick Shesham wood grade I Please Enable Macros to View BoQ information |
