|
| 1 | Routine Operation and Maintenance of Dewatering pumps and all types of other cable work, panel work as per direction of Engineer in Charge etc as required.1) Pump Operator/ Wireman - 3 Nos. (Round the clock)2) Khallasi - 2 Nos. (Rainy Season) |
| 2 | Taking out foating materials/malba etc. from sump under the foul condition Including removal and refixing of gate/jali of sump sand disposal of floating material to the authorized dumping ground of MCD complete as per the direction of Engineer-in-Charge as per requirement of site.Note - Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. |
| 3 | Repairing Servicing overhauling of 22 BHP Diesel Engine with pump set i/c replacement of O-Ring, Oil, nut-bolt & gasket, foot valve etc. i/c testing commissioning etc. as reqd. and all defective parts in diesel engine i/c lube oil and all required filter etc. complete with credit of old dismantled material as reqd. |
| 4 | Lifting of following size sewage submersible pump set from the UG tank/sump upto 10 ft. with double chain pully block and try pot stand i/c dismantling of delivery pipe line & motor connection & cartage from site to work shop as reqd. (Up to 25 HP) |
| 5 | Rewinding of following size motor 3 phase of sewage submersible P/Set with Rewinding kit of insulated copper wire i/c Mechanical seal both side, varnishing, baking, nomex paper & gasket set etc. i/c testing commissioning etc. as required. at regular interval complete as & when required. with credit of old dismantled material as reqd. i) 25 HP |
| 6 | Repairing overhauling of following size sewage submersible pump/ Monobloc pump set i/c replacement of O-Ring, Oil, nut-bolt & gasket etc. i/c testing commissioning etc. as reqd. at regular interval complete as & when required with credit of old dismantled material as reqd. i) 25 HP |
| 7 | Lowering and installation of following size of sewage submersible P/Set in the UG tank/sump i/c connection of delivery line and connection of starter etc. i/c testing & commissioning at regular interval complete as & when required i/c carriage from workshop to site etc as required. (Up to 25 HP) |
| 8 | Supplying and drawing following sizes PVC insulated & PVC sheathed 3 core flat submersible copper cable 1.1 KV grade and confirming to IS: 694 in the existing pipe, Cable tray, trench including connection, testing etc. as required. |
| 9 | 3 x 6 Sqmm |
| 10 | Providing, supplying, installing, testing and commissioning of 12V, 120Ah lead-acid heavy-duty starting battery, suitable for diesel engine pump set (22 BHP), complete with battery leads, terminals, clamps, with anti-corrosive paint, initial charging and testing etc. complete as required. |
| 11 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. |
| 12 | 150 mm dia |
| 13 | SITC of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. including bolts, nuts, rubber insertion, testing etc. complete as required. |
| 14 | 150mm dia. Please Enable Macros to View BoQ information |
