|
| 1 | Sit Up Station:Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 2 | Providing, designing and fixing of airs winging pair of size 1150 x900 x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. |
| 3 | Horse Rider Station:Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
| 4 | Arm Wheel:-Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete isset, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in- Charge regarding material, shape of equipment, colour onmetal, seat and base cover plate and fixing of equipment etc |
| 5 | Stainless Steel Sign Board for identification of Toilet Units as perthe satisfaction of Engineer-InCharge (NSI) |
| 6 | 2 Seater Stainless Steel WaitingChair (NSI) |
| 7 | Providing and Placing PVC POT(Gamla) size 18``, 12`` Dia Green inColour including decorative plant |
| 8 | SITC of Feedback mechanism inToilet |
| 9 | Main Structure Material: Galvanise Steel (GI) ERW Pipes ISIMarked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0mm thickness Surface Finish Zinc primer outdoor gradepolyester powder coating (min. 60-80 microns), Bending withfully automatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine, Bending with fully automaticPipe Bending Machine, Welding With Laser Welding HeighPower Machine. Support Structure Material: Galvanise Steel(GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outerdiameter (OD), 2.0-3.0 mm thickness Surface Finish Zincprimer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh PowerMachine... Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine.Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick)Manufacturing: CNC laser-cut with anti-slip perforated textureFinish: Hot-dip galvanized powder coating Lead Capacity:Minimum 150 kg per platform. mgr Base Material: CheckerSheet 3mm Process with CNC Laser Machine, Surface FinishZine primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe BendingMachine, Welding With Laser Welding Heigh Power Machine,Bending with fully automatic Pipe Bending Machine, WeldingWith Laser Welding Heigh Power Machine. Car Shaped SidePanel: designed to provide shade and aesthetic appeal toplayground structures. Crafted from durable 3 layer HDPEsheets 20 mm thik and precision router-cut Pins: are made upof M.S bright bar. Bearing bushes: 089mm OD seamlesspipe. Clamps and Connectors Material: Die-cast aluminium oraluminium alloy Finish: Natural anodized or powder coatedProperties: Anti-rust, tamper-resistant, non-toxic. FastenersMaterial: Galvanized Iron (GI), zinc-coated Type: Tamperproof bolts and nuts Rust Resistance: Min. 500 hours saltspray test protection: Plastic safety caps on exposedbolts.Surface Coating Primer: Epoxy zine-rich primer (40 microns)Top Coat: Ourdoor polyester powder (60-80 microns)Adhesion: 5B rating (ASTM D3359) Color Options: CustomRAL shades, UV-stabilized Safety Compliance Standards: EN1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant upto 2.5 meters Surfacing (optional): Prevention: No head, neck,or finger entrapment zones Edge Protection: Roundedcorners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 groutingInstallation: Certified team with adherence to manufacturer`slayout Tools and Hardware: Supplied with the product SitePreparation: Level ground, drainage recommended. |
| 10 | NS Item -Sea-SawMain Structure Material: Galvanised Steel (GI) ERW Pipes ISIMarked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0mm thickness Surface Finish Zinc primer plus outdoor-gradepolyester powder coating(min. 60-80 microns), Bending withfully automatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine.Handle and Leg rest Material: Galvanised Steel (GI) ERWPipes ISI Marked IS1239 Minimum 25 mm outer diameter(OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plusoutdoor-grade polyester powder coating(min. 60-80 microns),Bending with fullyA. automatic Pipe Bending Machine, Welding With LaserWelding Heigh Power Machine.Seat: designed for outdoor playgrounds. Crafted from durable3 layer HDPE sheets 20 mm thik and precision router-cut forSpring: Heavy-duty coil spring. High-carbon steel or alloyspring steel, 18 mm 20 mm wire thickness, Coil height:Approx. 300 mm. Clamps and Connectors Material: Die-castaluminium or aluminium alloy Finish: Natural anodized orpowder coated Properties: Anti-rust, tamper-resistant, nontoxic. Fasteners Material: Galvanized Iron (GI), zinc-coatedType: Tamper-proof bolts and nuts Rust Resistance: Min. 500hours salt spray test protection: Plastic safety caps onexposed bolts.Surface Coating Primer: Shot Blasting surface treatmentprocess using high velocity, steel abrasive Epoxy zinc-richprimer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) ColorOptions: Custom RAL shades, UV-stabilizedSafety Compliance Standards: EN 1176 (Europe) ASTMF1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing(optional). Prevention: No head, neck, or finger entrapmentzones Edge Protection: Rounded corners, no sharp edges.Installation: RCC blocks or anchor bolts with M20 groutingInstallation: Certified team with adherence to manufacturer`slayout Tools and Hardware: Supplied with the product SitePreparation: Level ground, drainage recommended. |
| 11 | NS Item -Sea-SawMain Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter(OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully A. automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring. High carbon steel or alloy spring steel, 18 mm 20 mm wire thickness, Coil height: Approx. 300 mm. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, nontoxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Shot Blasting surface treatment process using high velocity, steel abrasive Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant up to 2.5 meters Surfacing (optional). Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 12 | NS Item -WheelchairDescription Providing and supplying standard manual wheelchair made ofhigh-quality powder-coated/mild steel tubular frame with durable, corrosion-resistant finish. The wheelchair shall be foldable type for easy storage and portability. Technical Specifications: Frame: Mild Steel/Aluminum, powder-coated finish Seat Width: Approx. 18 inches (450 mm), made of durable, washable canvas or PVC upholstery Backrest: Fixed/Foldable with reinforced support A. Wheels: Rear wheels: 24` solid rubber with hand rims for selfpropelling Front wheels: 8` PU/solid rubber caster wheels Brakes: Manual parking brakes on both rear wheels Footrests: Foldable/Detachable, height adjustable with heel support strap Armrests: Fixed or flip-up cushioned armrests Load Capacity: Minimum 100 kg Foldable Design: For convenient storage and transportation Warranty: Minimum 1 year against manufacturing defect |
| 13 | NS Item -EPDMProviding and laying 16mm thick EPDM rubber flooring, comprising of 10mm thick Rubber buffing and EPDM Granules of 6mm on cleaned Cement concrete base including binder, thinner and all required equipment, transportation of material etc. Complete in all respect and as per engineer in charge. |
| 14 | NS Item -GONDOLA SWING Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60- 80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.. Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with anti-slip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum150 kg per platform. Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Min Car Shaped Side Panel: designed to provide shade and aesthetic appeal to playground structures. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut. Pins: are made up of M.S bright bar. Bearing bushes: 089mm OD seamless pipe. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts. Surface Coating Primer: Epoxy zinc-rich primer (40 microns) Top Coat: Outdoor polyester powder (60-80 microns) Adhesion: 5B rating (ASTM D3359) Color Options: Custom RAL shades, UV-stabilized Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA)Fall Height: Compliant upto 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. stallation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended. |
| 15 | NS Item -DUET Main Structure Material: Stainless Steel 304 Grade, 1.5-2.5 mm thick pipe or tube Dimensions: Minimum 60-32 mm outer diameter (OD), 1.5-2.5 mm thickness Cap HDPE Heigh dencity polyetheline 20mm thickness. Fasteners Material: Stainless steel fasteners are specified to BS EN ISO 3506. Part 1 covers bolts, screws and studs. A. Safety Compliance Standards: EN 1176 (Europe) ASTM F1487 (USA) Fall Height: Compliant up to 2.5 meters Surfacing (optional): Prevention: No head, neck, or finger entrapment zones Edge Protection: Rounded corners, no sharp edges. Installation: RCC blocks or anchor bolts with M20 grouting Installation: Certified team with adherence to manufacturer`s layout Tools and Hardware: Supplied with the product Site Preparation: Level ground, drainage recommended |
| 16 | NS Item -ARM REVOLVE ASSIST Main Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 3 mm thick Pipe and 025 mm round M.S bright bar in bending design. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up ofhard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel.Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other.Rubber: Safety base pads. Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations Powders Coating. All components arechemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.Safety Instructions and Exercise chart on machine - start and finish position chart stick on |
| 17 | All HSR ITEM (SEE IN DNIT) Please Enable Macros to View BoQ information |
