|
| 1 | Construction of new 33KV line connecting upcoming Jambari GSS to Chattabari DSS along with dismantling works under SOPD scheme under Chaygaon Electrical Sub-Division on Full Turnkey Mode(refer Annexure-1)Itemwise price should be filled in strictly as per the detailed Bill of Quantities at respective referred Annexure. |
| 2 | GI Steel Tubular Pole SP-80 (16.00) |
| 3 | ACSR \\" WOLF\\" Conductor |
| 4 | PG Clamp for ACSR Wolf |
| 5 | 33KV Polymeric Pin Insulator (FRP 34mm) |
| 6 | 33KV Disc Insulator (Porcelain) 90kN (T&C Type) |
| 7 | H/W fitting for Disc Insulator B&S 90kN tension type |
| 8 | Termination Kit for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 9 | 33 KV 1C X 241 Sq MM AAAC triple extruded Covered Conductor |
| 10 | 33kV Cable Tie for 1-Core x 241 sqmm AAAC Covered Conductor |
| 11 | 33kV Tension Hardware for 1-Core x 241 sqmm AAAC Covered Conductor |
| 12 | 33kV Tension Insulator for 1-Core x 241 sqmm AAAC Covered Conductor |
| 13 | Mid Span Jointing Kit for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 14 | 33KV 10KA Lightning Arrestor (Line Type) |
| 15 | Bi-metalic -240Sq mm |
| 16 | HDPE pipe PE100 grade 315mm outer dia |
| 17 | 33 KV XLPE Cable 3C X 400 sq mm aluminium armoured |
| 18 | 33 KV XLPE Cable jointing kit 3C X 400 sq mm outdoor type |
| 19 | ACSR \\" RACCON\\" Conductor |
| 20 | PG Clamp for ACSR Raccon |
| 21 | 11KV Pin Insulator (Polymer) 5KN (FRP 24mm) |
| 22 | 11KV Disc Insulator (Polymer) 45 KN (T&C Type) |
| 23 | H/W fitting for11KV Disc Insulator B&S 45kN tension type |
| 24 | GI Channel Cross Arm (100x50x6x3200mm) |
| 25 | GI Channel Cross Arm (100x50x6x2200mm) |
| 26 | GI Angle (50x50x6)mm |
| 27 | ASCR \\"WEASEL\\" Conductor |
| 28 | GI LT Angle Cross Arm (40x40x6x500)mm |
| 29 | Shackle Insulator Porcelain |
| 30 | LT GI Shackle Strap with Bolts |
| 31 | LT Pin Insulator (Porcelain) |
| 32 | LT GI Pin |
| 33 | HT Stay Set |
| 34 | Hot Dip GI Wire Stay Wire 7/10 SWG (For HT) |
| 35 | Guy Insulator (Porcelain) |
| 36 | TPGO-DBCR without Earth switch but with GI mounting Structure 630 Amps |
| 37 | CI Earth Pipe 1.8m Inner dia 100mm, outer dia 110mm with perforated holes of 15mm dia at 30 cm interval along length of the pipe |
| 38 | Hot Dip GI Wire 8 SWG |
| 39 | Pole Clamp of GI Flat 50x6mm |
| 40 | 33KV Danger Plate |
| 41 | GI Nuts & Bolts with Washer(Assorted) |
| 42 | Manual Boring |
| 43 | Grouting & mufflering of steel tubular pole of type SP-80 as per specification and drawing with minimum planting depth of 2.45 m (using PCC) |
| 44 | Grouting of Stay Set with PCC and Boulder |
| 45 | Dismantling of PSC Pole 9.75m |
| 46 | Dismantling of PSC Pole 8.5m |
| 47 | Dismantling of GI Steel Tubular Pole SP-66 (12.00) |
| 48 | Dismantling of ACSR \\" RACCON\\" Conductor |
| 49 | Dismantling of ASCR \\"WEASEL\\" Conductor |
| 50 | Dismantling of ACSR \\" WOLF\\" Conductor Please Enable Macros to View BoQ information |
