|
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins , arches, pillars, etc complete all as specified and directed. |
| 2 | Demolition of Concrete (reinforced ) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 3 | Demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | M&L for PCC 1:3:6 type D2 using 20mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed . |
| 5 | M&L Brick work using sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed . |
| 6 | M&L for rendering on brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and fair with using extra cement complete all as specified and directed. |
| 7 | M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in coping, benching, bed block, lintel band, drains and channels etc and similar work incl form work.complete all as specified and directed. |
| 8 | M&L RCC (nominal mix)type B1 1:2:4 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves including necessary formwork complete all as specified and directed. |
| 9 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specified and directed. |
| 10 | Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft / loose soil complete all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as spcfd and directed. |
| 12 | M&L for Mild steel work conforming to Fe-290 Gde E-165 in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including nut bolts and all necessary arrangement for fixing of chain link fencing, drilling, bolting or riveting etc omplete all as specified and directed |
| 13 | S&F for framed work such gates, guard bards including pintle hinge , bush stops, hand made sliding bolt etc with ends of bar should and /or reveted or forged into spikes, confirming to Fe 290 grade E-165omplete all as specified and directed |
| 14 | Dismantling of old fencing wiremesh any type complete. |
| 15 | Supply only chain link mild steel galvanized fencing, any type or size complete. |
| 16 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rail, straining bolts, etc including provision of binding wire complete. |
| 17 | M & L for Precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes , drain cover etc) and similar work including necessary form work and set in CM (1:6) complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately. |
| 18 | M & L mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips TMT bars complete all as specified and directed. |
| 19 | M & L for mild steel TMT bars 6 to 8 mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups. |
| 20 | M & L as in repair providing precast cement concrete louvers and jallies 35mm thick solid including all moulding incl frame of pcc (1:2:4) type B0 (12.5mm graded aggregate) crushed stone & set in CM 1:4 omplete all as specified and directed. |
| 21 | M&L for Preparation of new steel surface of any description, over 10cm in width or girth not other wise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for 2 coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete all as specified and directed |
| 23 | M&L one coat of exterior weather proof emulsion paint whiter or tinted on walls or fascia of roof or chajjas old painted surfaces of brick, stone, concrete, asbestos cement or plastered or unplastered old decorated painted surfaces of bldg all as specified & directed. |
| 24 | M&L for 20mm thick Granite (of any type) work(table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 26 | M&L Sand filling under floors are in foundation including watering and consolidation |
| 27 | M&L rubber Moulded pre-cast concrete interlocking paver block any shape and colouring and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigments all as specified and directed |
| 28 | M&L For Chequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigments cement and pigments. Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
