|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 2 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 3 | Providing and fixing of C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect DSR 17.16A |
| 4 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 5 | Flat back wash basin of size 550x400 mm DSR 17.25.2 |
| 6 | Providing and fixing P.V.C.Waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28 |
| 7 | 32 mm dia : DSR 17.28.1.1 |
| 8 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. DSR 17.60 |
| 9 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 10 | Sand Cast Iron S&S as per IS- 3989 DSR17.60.2.1 |
| 11 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10 |
| 12 | Internal Work - Exposed on Wall |
| 13 | 15 mm dia. nominal bore : DSR 18.10.1 |
| 14 | 20 mm dia. nominal bore : DSR 18.10.2 |
| 15 | Providing and fixing of forged brass / GM Gate Valve |
| 16 | size 20mm i/d DSR 18.17.1A |
| 17 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 18 | 45 cm length : DSR 18.21.2 |
| 19 | 15 mm nominal bore : DSR 18.21.2.1 |
| 20 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 21 | 15 mm nominal bore : DSR 18.46.1 |
| 22 | 20 mm nominal bore : DSR 18.46.2 |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 25 | 15 mm nominal bore. DSR 18.49.1 |
| 26 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 27 | 15 mm nominal bore. DSR 18.51.1 |
| 28 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52 |
| 29 | 15 mm nominal bore. DSR 18.52.1 |
| 30 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 31 | 15 mm nominal bore. DSR 18.53.1 |
| 32 | Providing and fixing of C.P. Brass Extension Nipple Size 15 mm x 50 mm of approved make and quality as per direction of EIC DSR 18.53A |
| 33 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 34 | 15mm nominal bore DSR 18.62.1 |
| 35 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms DSR 18.62.2 |
| 36 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.: DSR 18.78 |
| 37 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required of Size 27\\" x 21\\" x 8\\" of approved make |
| 38 | Providing and fixing of looking glass with PVC beeding 1/4\\" with plastic hard board complete in all respect of approved make |
| 39 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 40 | Providing and fixing of Wall hung wash basin with full pedestal complete with C.I./MS brackets 32mm C.P. brass waste as per standard pattern including cutting and painting of brackets and making good the walls Make Cera Model CONCORD( Basin - 1022 & Pedestal 1121 ) or equivalent model of approved make to the satisfaction of EIC |
| 41 | Providing and Fixing Chinaware Counter Top Basin 600 x 400 x 160 make Jaquar / CERA / Kerovit / Hindware |
| 42 | Providing and fixing of Anglular stop cock, With Wall Flange, Make Jaquar range Opal Prime Model OPP-CHR-15053PM or equivalent model of approved make to the satisfaction of EIC |
| 43 | Providing and fixing of Bib Tap with Wall Flange, Make Jaquar range Opal Prime Model OPP-CHR-15037PM or equivalent model of approved make to the satisfaction of EIC |
| 44 | Providing and fixing Single Lever Basin Mixer Without Popup Waste with 450mm Long Braided Hoses Make Jaquar range Opal Prime Model OPP-CHR-15011BPM or equivalent model of approved make to the satisfaction of EIC |
| 45 | Providing and fixing of chinaware One Piece Floor mounted European Type Water Closet with all other fitting including EWC, Cistern, Seat Cover and fitting etc complete. Make CERA Model CRUSE / CAMPBELL or equivalent model of approved make to the satisfaction of EIC |
| 46 | P/F of chinaware Two Piece wall hung EWC complete with Cistern, Seat Cover and Twin Flush Fittings of make CERA Model CAMPBELL(Seat 2099, Cistern 2198, Seat Cover 2399, Twin Flush Fitting 2299 ) or equivalent model of approved make to the satisfaction of EIC |
| 47 | Providing and fixing Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange ( without Hand & Overhead Shower) Make Jaquar Model OPP-CHR-15125PM or equivalent model of approved make to the satisfaction of EIC |
| 48 | Providing and fixing of Sink Mixer with Swiniging Spout ( Wall Mounted Model ) with connecting Legs & Wall Flanges complete Make Jaquar range Florentine Model FLR-CHR-5309N or equivalent model of approved make to the satisfaction of EIC |
| 49 | Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of approved make to the satisfaction of EIC |
| 50 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of approved make to the satisfaction of EIC |
| 51 | Providing and fixing of C.P. Tumbler Holder complete in all respects make Jaquar range Continental Model ACN-1141N or equivalent model of approved make to the satisfaction of EIC |
| 52 | Providing and fixing of C.P. Towel Rack 600mm Long With Lower Hangers Complete in all respects Make Jaquar range Continental Model ACN-CHR-1185S or equivalent model of approved make to the satisfaction of EIC |
| 53 | Providing and fixing of Corner Glass Shelf ( with bracket ) make Jaquar range Continental Model ACN-1173N or equivalent model of approved make to the satisfaction of EIC |
| 54 | Providing and fixing of Shower Arm Wall Mounted with Wall flange |
| 55 | SHA 479L450 / 450 mm long round or equivalent model of approved make to the satisfaction of EIC |
| 56 | Providing & fixing of Overhead Shower Square Shape Single Flow Make Jaquar Model |
| 57 | 150 mm / OHS 1605 or equivalent model of approved make to the satisfaction of EIC |
| 58 | Providing and fixing of Hand shower Round Shape ( ABS body Chrome Plated with Gray Face Plate ) with Rubit Cleaning System make Jaquar Model |
| 59 | 80 mm dia / HSH 1937 or equivalent model of approved make to the satisfaction of EIC |
| 60 | Providing and fixing Easy Flex Tube in Chrome Finish 1.5 mtr long with nuts complete make Jaquar Model SHA-549 or equivalent model of approved make to the satisfaction of EIC |
| 61 | Providing and fixing of C.P. Toilet Roll Holder complete in all respects make Jaquar range Continental Model ACN-1151N or equivalent model of approved make to the satisfaction of EIC |
| 62 | Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent model of approved make to the satisfaction of EIC |
| 63 | Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia 1.2 Meter Long Easy Flexible Tube and Wall Hook Finish Chrome complete in all respects Make Jaquar Model ALD-CHR-573 or equivalent model of approved make to the satisfaction of EIC |
| 64 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 65 | 110 mm |
| 66 | 90 mm |
| 67 | Providing and fixing of CP sink Waste for S.S Sink of approved make |
| 68 | Providing and fixing of Gun metal peat valve ISI Marked |
| 69 | 15 mm dia nominal bore |
| 70 | Providing and fixing of CP Pillar Cock of approved make |
| 71 | Manufacturing, Supplying and fixing of Rain Shelter for Pneumatic Pump / Monobloc Pump made from MS Angle covered with Fibre Sheet including grouting complete to the satisfaction of EIC |
| 72 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 73 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 74 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 75 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO Please Enable Macros to View BoQ information |
