|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1:5 m in width or 10 sqm or plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (DSR No. 2.8.1) |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. In layers not exceeding 20 Cm. in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift. (DSR No. 2.25) |
| 3 | Carriage of Material by Mechanical Transport including loading, unloading and stacking Earth up to 2 km (DSR No. 1.1.2) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level: 1:5:10 (1 Cement : 5 manufactured sand derived from Recyled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) (DSR No. 4.1.10A) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size Recycled concrete Aggregate (RCA) (NSI based DSR No. 4.1.4) |
| 6 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixtgure of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: 250 mm diameter (DSR No. 19.1.4) |
| 7 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design: 250 mm diameter S.W. pipe (RCA) (NSI based DSR No. 19.3.4) |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) (DSR No. 6.1.1) |
| 9 | 12 mm cement plaster finished with a floating coat of neat cement of mix: 1:4 (1 cement : 4 fine sand) (DSR No. 13.7.2) |
| 10 | Centering and shuttering including strutting, propping etc.. And removal of form for: Suspended floors, roofs, landings, balconies and access platform (DSR No. 5.9.3) |
| 11 | Reinforced cement, concrete work in beams, suspended floors, roofs having slope up to 15o landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources (DSR No. 5.3) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR No. 5.22.6) |
| 13 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between jprotruded legs having 2 mm tread on top surface by ribbing r chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design (DSR No. 19.16) |
| 14 | Making connection of drain or sewer line with, existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: For pipes 100 to 250 mm diameter (DSR No. 19.21.1) |
| 15 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality: HD-20: Circular shape 560 mm internal diameter (DSR No. 19.19.3.1) Please Enable Macros to View BoQ information |
