|
| 1 | Description Item |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil DSR-2.8.1 2023 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) ,including cost of form- work,in foundation and floors .DSR-4.1.8. 2023 |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)same as but R.C.C. work in Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete) DSR-5.1.2 2023 |
| 5 | R.C.C. columns in 1:1.5:3 having strength not less than M-20. DSR-5.2.2 2023 |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).Slab.Lighter beams i.e. having spans upto 6 m.Same as above but for lighter beam having span upto 6 meter DSR-5.3 2023 |
| 7 | same as above item no. 5 but RCC work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20mm normal size). DSR-5.3 2023 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22.6 2023 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete. DSR-5.9.1 2023 |
| 10 | Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick. DSR-5.9.20 2023 |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick DSR-5.9.21 2023 |
| 12 | Columns,Pillars, Piers, Abutments, Posts and Struts. DSR-5.9.6 2023 |
| 13 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) DSR-4..1 2023 |
| 14 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR-2.27 2023 |
| 15 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). DSR-16.69 2023 |
| 16 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. Sqm DSR-16.91.1 2023 |
| 17 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :30mm thick Red sand stone DSR-8.14.5.2 2023 |
| 18 | Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) DSR-6.4.2 2023 |
| 19 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation Class M-150 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) DSR-6.13.2 2023 |
| 20 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:6(1)1 cement : 6 c. sand DSR-13.5.2 2023 |
| 21 | 12mm cement plaster . (1)1 cement : 6 coarse sand. DSR- 13.4.2 2023 |
| 22 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR-13.47.1 2023 |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR-13.80 2023 |
| 24 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour and shade Area of slab upto 0.50 sqm DSR-8.2.2.2 2023 |
| 25 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR-10.25.2 2023 |
| 26 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture DSR-13.48.3 2023 |
| 27 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared DSR-2.32 2023 |
| 28 | INAUGRATION STONE GRANITE SIZE WITHING WRITUP 750X600 MM ALONG WITH BRICK PEDESTAL previous approved rate |
| 29 | Supply of VDA Logo siez 300x150 MS sheet 2.0 mm with CNC cutting work Design as per drawing previous approved rate |
| 30 | Providing & Fixing of Curved Sign borad display having name of park made with 2 mm thick ms sheet previous approved rate |
| 31 | Supply and Installation of WPC Jali with CNC cutting and painting in artistic mural as per design complete work M.R. |
| 32 | Supply and Installation of Maharna Pratap Statue M.R. |
| 33 | Architectural Consultancy Fees Please Enable Macros to View BoQ information |
