|
| 1 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC 16 sqmm armoure 4 core cables PWD Schdule F-4/7 (c) |
| 2 | Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 16 sqmm armoure 4 core cables PWD Schdule F-5/8 (b-XII) |
| 3 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed (PWD schedule:- F-2, 1(a)) |
| 4 | Supplying of different types of LED lamps (9W) Crompton make, LED 9W - B22 - CDL(I&WD Schedule:-P-113,5.3 F.25.2) |
| 5 | Fixing only lamp (PWD schedule:- C-2, 11) |
| 6 | Supply and fixingf of CUT OUT 200 AMP HAVELLS OR Equivalent |
| 7 | Supplying and delivery of 150 W + 5% LED flood light fitting with secondary optics with lens made in pressure die cast Aluminium housing with toughned front glass IP66 protection with Silicon gel Potted Driver, Road Way Luminarie along with 10 KV inbuilt surge Protection, min. efficacy: 120 lm/Watt. (Make: Bajaj, Model: PRAZE : Cat no. : PRAZE F 180L WH NB A5 TG SD or Equivalent model of Crompton / Panasonic / Philips), conforming to Technical Specification and latest accreditation. LM-79 and LM-80 report to be provided conforming to latest NABL accreditation. LED should be warranted for 5 years.Analysis of rates |
| 8 | Supply of 1.1 KV grade XLPE insulated PVC Sheathed Aluminum conductor Armoured Cable 2 core 25 Sq.mm (Conforming to IS - 7098 (Part 1) : 1988). Make: KEI / Polycab / Havells / RR Kabel.(I&WD (M&E) USOR 2022, P-101 Sl no- 5.3.A 2) |
| 9 | Installation the feeder pillar box only on cement brick foundation including plastering and neat cementing as per specification and direction of E.I.C. (UDMA) |
| 10 | S/F M. S. loop box (10 SWG) of size 10.3/4 “x 8.3/4” x 5\\" (269mm x 219mm x125mm) having almirah type cover complete with special type locking arrangement including S/F 8 “x6” x1/4\\" (200mm x 150mm x 6 mm) bakelite sheet 1 no. 4-way ebonit connector block, 1 No. 15 Amp fuse unit fitted inside the box and suitable size danger board riveted on cover of the box outside & fixing the box with pole by means of M.S. Clamps of 1\\"x1/4\\" (25mm x 6mm) of suitable length and encasing the box by 1:3:6 cement concrete with graded stone chip (3/4\\" down). The depth of the concrete should be 60cm x 54cm x 54cm including plastering and neat cementing and S/F 2 Nos. compression gland of suitable size and making all necessary connections as reqd.(UDMA Schedule:-P-6,34) |
| 11 | Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) (Dia) 40 mm (PWD Sanitary & Plumbing works 2018 / Page-19 / item 20 A |
| 12 | Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. ) (A) Under Ground (v) 40 mm dia. (PWD Sanitary & Plumbing works 2018 / Page-11 / item 18 A ) |
| 13 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint : Upto 9.0 mtr. long pole - 1st coat of aluminium paint over 1 coat of RO priming (PWD SOR 2017 / H - 2 / item 4 a i) |
| 14 | 2nd coat of aluminium paint over 1st coat (PWD SOR 2017 / H - 2 / item 4 a ii ) |
| 15 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection SP: 6-32A (Make: Legrand) (PWD Elect 2017, P- D5, Sl no 6) |
| 16 | Supply of G.I. Earth Spike of 1833 x 20mmWBSEDCL SCDDM 2021-22 P-1 of 7 Sl no: 21 (403.03/1.18= 341.55) |
| 17 | Erection/ fixing of G.I. Earth Spike of 1833 x 20mm WBSEDCL Office Order CED-13, dt.-15-05-2018, P-5 of 7 Sl no: 16 |
| 18 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages : a) Solid GI wire iii) No. 6 SWG (PWD Electrical 2017 SOR, Page: G 2, Item 5 a iii) |
| 19 | Supplying and Drawing 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC)of following sizes in 25mm PVC casing-capping (Precisionmake) incl. necy. PVC clips, fittings etc, 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm).(PWD E-11-1-c) |
| 20 | Add GST @ 18% |
| 21 | Add Cess @1% Please Enable Macros to View BoQ information |
