|
| 1 | SCHEDULE A : Extension of HT line by 3 core 6.35/11 KV ,95 sq mm XLPE insulated Power Cable and installation of 1X200 KVA,11/0.433 KV Sub-station for facilitating individual service connections in the BS Auris Apartment ,East Thana road near Ganaraj chowmuhani under ESD -I,Banamalipur Agartala |
| 2 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of 3- Phase, 3-core, 6.35/11 KV, 95 sqmm, FRLS type, XLPE insulated, Armoured , Aluminium Conductor Power Cable as per IS 7098/II/1985 with upto date amendments. |
| 3 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of HDPE Pipe, PE - 100 Grade, PN 8 (SDR 17) , 110 mm Outer Dia, Wall thickness : minimum- 6.5 mm, maximum: 7.3 mm. |
| 4 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of 6 core , multi strand 35 sq mm Aluminium PVC cable |
| 5 | Supply of fabricated copper strip as per requirement. |
| 6 | Supply of 1/2 inch dia PVC Pipe for earthing |
| 7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 35 sqmm in the existing masonry open duct as required. |
| 8 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of size 3C X 95 sqmm ,direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-350mm, Hieght-1200mm Sand(couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks. |
| 9 | Laying of 11 KV ,XLPE insulated power cable of size 3C X 95 sqmm by manually digging /machine driIIing horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100 mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge. |
| 10 | Supplying and Making Indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core, 95 sqmm, XLPE aluminium conductor cable of 11 KV grade as required. |
| 11 | Supplying and Making of Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core, 95 sqmm, XLPE, aluminium conductor cable of 11 KV grade as required. |
| 12 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp as required. |
| 13 | Coiling of excess Single/3core/3.5 Core, upto to 400sqmm, HV/MV, XLPE insulated, armoured power Cable direct into earth including excavation of earth upto a depth of 1500mm (Size pit should be 2250mmX2250mm or as per site requirement.) including 1st class brick protection of two layer flat brick soling , 300 mm. Fine sand (Local quary) for cushioning/bed and refilling and ramming the excavated soil as per direction of Engineer in charge. |
| 14 | Erection of M.S.Angle Cross-Arm, 1.0 to 2.5 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts). |
| 15 | Erection of 11 KV Pin insulator along with Pin. |
| 16 | Fabrication of Cross-Arms by MS Channel/MS Angle as per specification. |
| 17 | Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification. |
| 18 | Laying & Stringing of 1 KM (Single Conductor) ACSR 6/1/3.35 mm dia 'RABBIT' including hoisting & binding etc. Complete as required. |
| 19 | Installation/Positioning of 11/0.430KV,3-Phase 200KVA , Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing. |
| 20 | Fixing of cut out( set of 3 nos.) on wooden plank of size 24\\"x 10 \\"x 1.5 \\" & cable connections with termination by lugs complete incl. supply of wooden plank ,screws,MS clamp etc. |
| 21 | Supply of fabricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating. |
| 22 | Supply of M.S. Nuts & Bolts incl. washer of assorted size ISI marked machine made. |
| 23 | Supply of 2.5mtr. Long , 40mm dia G.I.Pipe Make: TATA/ JINDAL) |
| 24 | Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit). |
| 25 | Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required) |
| 26 | Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode |
| 27 | Supply, transportation , loading, unloading , delivery at worksite, installation and commissioning of outdoor type, floor mounted , 11 KV, 3 phase, 630 A, LBS Panel with earth switch , indicator lamps, Trip push button, Spring assisted mechanism, manual operated with HRC fuse. |
| 28 | Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35 mtr. in length supported by G.l.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required . |
| 29 | Carriage of 11/0.430, 3-Phase 200KVA Distribution Transformer by Mechanical Transport from the ESD Site /Store/Workshop to working site including loading, unloading and placing on base, as required, |
| 30 | Carriage of line materials such as Cable.AAC, AAAC, ACSR, G.l.Wire,Cross-Arm,Stay Set.Insulators etc., by Mechanical Transport from the Electrical SubDivisional Site Store to working , including loading, unloading and stacking as required. |
| 31 | SCHEDULE B : Extension of HT UG Cable including installation of one no. Base mounted 315 KVA Transformer to provide power supply to SKI TULIP at Ramnagar 4/5 under ESD-III,Pragati |
| 32 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of 3- Phase, 3-core, 6.35/11 KV, 70 sqmm, FRLS type, XLPE insulated, Armoured , Aluminium Conductor Power Cable as per IS 7098/II/1985 with upto date amendments. |
| 33 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of HDPE Pipe, PE - 100 Grade, PN 8 (SDR 17) , 63 mm Outer Dia, Wall thickness : minimum- 3.7 mm, maximum: 4.2 mm. |
| 34 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of fabricated (50x50X6) mm M.S. Angle. |
| 35 | Supply of fabricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating. |
| 36 | Supply of M.S. Nuts & Bolts incl. washer of assorted size ISI marked machine made. |
| 37 | Supply of 2.5mtr. Long , 40mm dia G.I.Pipe Make: TATA/ JINDAL) |
| 38 | Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit). |
| 39 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of 11 KV HT , 4 way outdoor type feeder pillar- Kiosk with necessary fittings and structures complete as per requirement. |
| 40 | Supply, loading, transportation, unloading, insurance, delivery at site, handling, storage of 3 way, LT SMC Pillar Box , 630 Amp incoming ( 1 no.) and 250 Amp ougoings ( 02 nos.) , switchable with HRC Fuse links. |
| 41 | Laying of 11 KV ,XLPE insulated power cable of size 3C X 70 sqmm by manually digging /machine driIIing horizontally or diagonali direction for road crossing / Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 1100 mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering In Charge. |
| 42 | Supplying and Making of Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core, 70 sqmm, XLPE, aluminium conductor cable of 11 KV grade as required. |
| 43 | Supplying and Making of indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 core, 70 sqmm, XLPE, aluminium conductor cable of 11 KV grade as required. |
| 44 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp as required |
| 45 | Supply, transportation , loading, unloading , delivery at worksite, installation and commissioning of outdoor type, floor mounted , 11 KV, 3 phase, 630 A, LBS Panel with earth switch , indicator lamps, Trip push button, Spring assisted mechanism, manual operated with HRC fuse. |
| 46 | Erection of M.S.Angle Cross-Arm bracket for LT Line ,upto 1.2Mtr. Long of 50 x 50 x6mm/ 65 x65 x 6 mm. |
| 47 | Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification. |
| 48 | Installation & commissioning of LT SMC Pillar Box-FRP- 3way switchable with HRC fuse link. |
| 49 | Erection of 4 Way, HT Kiosk/ 11 KV outdoor Type Feeder pillar made of 10 SWG MS Sheet complete with electrolytic grade Aluminium Busbar,HT Insulators etc. as required provided with locking system and painting, to be filled in structure of MS Angle(50x50x6 mm) & MS flat(40x6 mm) including supply of MS Angle and MS Flat as required and supply of cement,river sand & Jhama bricks in the ratio 1:2:4 (1 cement: 2 river sand: 4 Jhama bricks aggregate with 20 mm nominal size) for concreting each leg of feeder pillar. |
| 50 | Installation/Positioning of 11/0.430KV,3-Phase , 315 KVA, Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing. |
| 51 | Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required) |
| 52 | Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode. |
| 53 | Carriage of 11/0.430, 3-Phase 315 KVA Distribution Transformer by Mechanical Transport from the Store/Workshop to ESD stack yard including loading, unloading and placing , as required. |
| 54 | Carriage of 11/0.430, 3-Phase 315 KVA, Distribution Transformer by Mechanical Transport from the ESD stackyard to working site including loading, unloading and placing on base, as required. |
| 55 | Carriage of materials such as Cable.AAC, AAAC, ACSR, G.l.Wire,Cross-Arm,Stay Set.Insulators etc., by Mechanical Transport from the Electrical SubDivisional Site Store to working , including loading, unloading and stacking as required. Please Enable Macros to View BoQ information |
