|
| 1 | Dismantling Of old Tiles or Brick or granolithic floors including base concrete and including stacking of dismantled material as directed by the Engineer -in-charge with in a distance of 60 metre(200 Feet) [S.No 697] |
| 2 | Dismantling Brick Work or stone work in lime or cement mortar and including stacking of materials as Directed by the Engineer-in-charge with in a distance of 60 meter(200feet) |
| 3 | Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. [SOR UP PWD SI - 273] |
| 4 | Cement Concrete in proportion of 8:4:1 with 4cm guage approved stone ballast, Coarse sand & cement in the materials, labour Tools & plants etc. required for proper completion of the work. [SOR UP PWD SI - 279] |
| 5 | Construction of Granular sub-base by providing Coarse graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator of OMC, and compacting with vibratory power roller to achieve the desired density, complete [As per clause 401 RA] |
| 6 | M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. [SOR UP PWD - 305A] |
| 7 | 12mm thick plaster 1:4 cement and Coure sand mortar in all complete |
| 8 | R.C.C. 1:1.5:3 cement course sand and 20 mm gauge stone grit all work complete (S.I. No. 284(a)) |
| 9 | Mild steel work in all work complete (S.I. No. 504) |
| 10 | P.C.C 1:2:4 with in cement and fine sand and 40 mm gauge brick ballast in all work complete |
| 11 | C.C. 1:1.5:3 cement course sand and 20 mm gauge stone grit with micron polythene (without dovel bar) all work complete |
| 12 | Supply of 80mm thick Precast cement concerete I-Shape Interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minimum 5 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement , smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpa and weight 4.5kg per including cost of material, with a blanket layer of 4.00cm. thick fine sand. including labour, T & P etc required for proper completion of the work as directed by Engineer-in-charge. [SOR UP NEW 786 Item No-14] |
| 13 | Laying of 80mm thick Precast cement concerete I-Shape Interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minimum 5 mm thickness having plan dimension... (अधूरा विवरण) [SOR UP NEW 786 Item No-14] |
| 14 | Deduction cost of old brick [SOR UP PWD Supply SI - 1A] |
| 15 | Deduction cost of old brick bat [SOR UP PWD Supply SI - 1F] |
| 16 | Add 18%GST Please Enable Macros to View BoQ information |
