|
| 1 | Supplying, installation, testing & commissioning of the following outdoor type light fixtures complete with LED lamp and Driver and origin of LED chip to be specified. THD for the lights should not be more than 10, current less than 8% and voltage less than 5%, SDMC of less than equal to 5 with maximum CCT variation permissible is 125 K and UV should not be more than +/- 0.002. Lumens should be atleast 125 lumens / watt ot to be specified. Vendors to specify the shift in CCT due to the reflectors used. Operating temeprature for LED should be >60 Deg. C. For all the light fixtures M79 & LM80 certification required and vendor should provide the 3 Years on site replacement warranty for all light fixtures. 10 Watt LED step light fixture suitable for illuminating ghat steps etc. Make-Havells,LT, Bajaj, Philips, (With 5 Year Warranty) |
| 2 | 12 Watt LED ground burial up lighter suitable for illuminating plants. Make-Havells,LT, Bajaj, Philips, (With 5 Year Warranty) |
| 3 | Supply of 120 sq. mm 3 core high conductivity aluminum strand compacted circular conductor XLPE armoured 11 kv cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest amendment complete in all respects as per direction of E/I. Make: Gloster/Universal/Polycab/Havells. (UPERC P-41) |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 120 sq. mm DSR-2018 Item No.8.3.1 |
| 5 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories with including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.120 Sq. mm DSR-2018 Item No.10.5.2 |
| 6 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories with including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.120 Sq. mm DSR- 2018 Item No.10.4.2 |
| 7 | Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top of suitable size of as directed by the Engineer-Incharge, complete in all respects the armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS.No. 501 (Grandley/Polycab/ Havells make) |
| 8 | 16 sq. mm. 4 core |
| 9 | 35 sq. mm. 3-1/2 core |
| 10 | 50 sq. mm. 3-1/2 core |
| 11 | 70 sq. mm. 3-1/2 core |
| 12 | 240 sq. mm. 3-1/2 core |
| 13 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 14 | 10 sq. mm. |
| 15 | 16 sq. mm. |
| 16 | 35 sq. mm. |
| 17 | 50 sq. mm. |
| 18 | 70 sq. mm. |
| 19 | 240 sq. mm. |
| 20 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS No. 725 (B) |
| 21 | S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects (P.S. No. 716) |
| 22 | Supply and fixing of LED street Light fitting having die cast alumi 30 watt to 40 watt confirming to IP 65 and above protection copmplete in all respect. PS N o. 1420 Cat AAA Make-Havells,LT, Bajaj, Philips, (With 5 Year Warranty) |
| 23 | Supply and fixing of decorative 40 to 45 Watt LED Post Top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set confirming IP 65 and above protection complete in all respect. PS No. 1443 cat AAAMake-Havells,LT, Bajaj, Philips, (With 5 Year Warranty) |
| 24 | Supply installation testing and commisioning of LED FIXTURE - Ground Buried Light ,10-15W,3000K, IP67 The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather resistant.Protection screen in tempered glass with high impact resistance (=>IK08). Premium thermal management by high heat conductivity aluminum alloy and thermal fins. SS Cover. Pure Polyester powder coating. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP67 rated. Length-380mm,Height – 110mm, Width.-90mm, Weight - 2.45Kgs. Power LED Module with high efficacy LED's(CREE/OSRAM with ESD>=8kV & ceramic package), on Printed Circuit Board with metal core plate. Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage Over- Current & with in-built surge protection. Lens made of PC offers different beam angles-10deg./12deg./25deg./35deg. to serve different lighting needs.. Estimated LED Lifetime is 70,000 hours minimum. LM80 report from LED Manufacturer should be submitted. Light fixture Lumen output is minimum 1000Lumens. Sample Should be submitted for concerned engineer incharge for approval of light fixture.Make-Havells,LT, Bajaj, Philips, (With 5 Year Warranty) |
| 25 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. DSR Electricals 2018 No. 9.3a) 2 X 16 sq. mm DSR 9.3.1 |
| 26 | b) 2 X 25 sq. mm DSR 9.3.2 |
| 27 | c) 4 X 16 sq. mm DSR 9.3.29 |
| 28 | d) 3.5 x 50 sq. mm DSR 9.3.19 |
| 29 | e) 3.5 X 70 sq. mm DSR 9.3.20 |
| 30 | Laying old Cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. All complete as per the direction of engineer (AOR) |
| 31 | Taking out existing CC interlocking from footpath/central verge, including removal of rubbish etc, disposal of unserviceable material to the dumping ground, for wich payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of E/I. (AOR) |
| 32 | Location and pin pointing of LT cable fault exposing the same in the underground LT cables including digging of trench upto the depth of the cable. Cutting the faulty cable and sealing of the faulty cable, by Expert technical staff. (AOR) |
| 33 | Location and pin pointing of LT cable fault exposing the same in the underground LT cables including digging of trench upto the depth of the cable. Cutting the faulty cable and sealing of the faulty cable, by providing fault locator machines with operator (Cable Fault Locator) (AOR) |
| 34 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR 14.16a) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 35 | b) 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 36 | Supply of 02 nos Electrician for maintenance of Park light etc.for 12 month (34241x2=68482 as per order No. Noida / GM(civil) /WC-1/ 2026/ 3055 /Dt 21.01.2026 |
| 37 | Supply of 02 Nos helper for maintenance of Park light etc.for 12 month (25270x2=50540 as per order No. Noida / GM(civil) /WC-1/ 2026/ 3055 /Dt 21.01.2026 |
| 38 | S/F following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fusese, isolating switch metering instrument & instrument box with CTs etc.in case of TPN complete in all respects. a) 15 A TPN PS No-807 (D) |
| 39 | Repairing of 11 kv Fuse Wire/Jumper I/c supply and Fixing of required size conductor fuse wires of 11 kv line/DP Structure of transformer by taking Shutdown from UPPCL Department with all Safety Instument like safety Belt, Gloves, Shose and other Nacessary Item. Please Enable Macros to View BoQ information |
