|
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demoliton of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 3 | Demolition of stone slabs and tiles of any description or thicness in floors laid bedded pointed in any cement mortor in any position not otherwise specifically provided complete all as specified and directed. |
| 4 | M&L for Double Charged Dark Vitrified ceramic coloured tiles 10mm thick (Square/rectangular) area of each tile exceeding 0.36sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 5 | M&L for Double Charged Dark Vitrified ceramic coloured tiles 10mm thick (Square/rectangular) area of each tile exceeding 0.36sqm in skirting, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as complete all as specified and directed. |
| 6 | M&L for ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 7 | M&L for ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 8 | M&L for glazed ceramic tiles 350 x 250x 7mm / 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and directed |
| 9 | M & L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in, foundation filing and mass concrete. bed blocks, coping, lintels upto 1.5m span and similar work complete all as specified and directed. |
| 10 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed. |
| 11 | M&L for 20mm Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6. |
| 12 | Rounding to edges of stone slabs one edge, such as steop, cooking platform and other similar situations complete all as specified and directed. |
| 13 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.. |
| 14 | Demolition of Precast Concrete work/ precast concreteblock built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 15 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) all as specified. |
| 16 | M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 17 | M & L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement. |
| 18 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 19 | Supply only Integral water proofing compound. |
| 20 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered/ complete removed surface to prepare the surface even and smooth complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered wall surface applying two coats of plastic emulsion paint over a coat of primer complete all as speicified and as directed. |
| 22 | M&L for applying two coats of plastic emulsion paint over a coat of primer on newly plastered surface of ceiling including preparation of surface complete all as specified and directed. Make: Asian Paint Apcolite advanced Premium paint or equivalent as approved by GE. |
| 23 | M&L for preparation of New plastered surface and applying two coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.67litre/10sqm over and including priming coat of exterior primer applied @2.2kg/10sqm complete all as specified and as directed.Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 24 | M&L for complete removal of existing treatement and applying two coats of plastic emulsion paint over a coat of primer on wall surface all as specified and directed. Make: Asian Paint Apcolite Advanced Premium Emulsion Paint or equivalent as approved by GE. |
| 25 | M&L for compolete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer on ceiling surfaces all as specified and directed. Make.Asian Paint Apcolite Advanced Premium Emulsion Paint or equivalent as approved by GE |
| 26 | M&L for preparation of old plastered surface and applying one coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.67litre/10sqm over complete all as specified and as directed.Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 27 | M&L for preparation of old plastered surface and applying one coat of 100% premium acrylic emlusion paint (company depot tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of with silicon additives coat applied @1.67litre/10sqm over complete all as specified and as directed.Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 28 | M&L for preparation of old steel surface exc 10cm width and girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 29 | M&L for preparation of old wooden surfaces exc 10cm width and girth applying one coat of synthetic enamel paint complete all as specified and directed. |
| 30 | M&L for complete removal of existing treatment and preparation of old plastered wall surface using mechanical means and removing all fungus, black stains, algae etc., and applying two coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.43litre/10sqm over and including priming coat of exterior primer applied @0.9litre/10sqm complete all as specified and as directed.Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 31 | M&L for complete removal of exisitng treatment and preparation of old plastered surface using mechanical means and removing all fungus, black algae etc and applying two coat of 100% premium acrylic emlusion paint (company depot tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of with silicon additives coat applied @1.67litre/10sqm over and including priming coat of exterior primer applied @0.9litre/10sqm complete all as specified and as directed.Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 32 | Taking down chowkats or frame with shutters without taking off shutter from the frame not exceeding 1.5sqm each and removing to store complete all as specified and directed. |
| 33 | Taking down chowkats or frame with shutters (without taking off shutter frame) exceeding 1.5sqm but not exceeding 4.00sqm each and removing to store complete all as specified and directed. |
| 34 | Taking down shutters of any description exceeding 1.00Sqm but nexc 2.00Sqm each complete all as specified and directed. |
| 35 | Taking down shutters of any description n exceeding 1.00Sqm each complete all as specified and directed. |
| 36 | Refixing shutters of any description in same opening exceeding 1.00sqm but not exceeding 2.00sqm each complete all as specified and directed. |
| 37 | Resecuring or easing and adjusting without taking down shutters of any description and any size complete all as specified and directed. |
| 38 | Providing and fixing factory made uPVG white colour Sliding window of area n exc 2.00 sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories with drainage facility,glazing beading and sides to be filled with silicon sealent. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 39 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 40 | S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 41 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item) |
| 42 | S&F for factory made single extruded 18/19mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc., of required sizes comprising of virgin polymer of K value 58-60 (suspension Grade), calcium carbonate and ntural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maxmium toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal stength of 1800N (Face) & 900N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stailess steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk SS screws etc., complete all as specified and directed. |
| 43 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 44 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat oulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom ailon either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC heet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 45 | S&F for 125 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 etc., complete all as specified and as directed. |
| 46 | S&F Butt hinges, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21medium weight cold rolled mild steel Etc., complete all as specified and directed. |
| 47 | S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed. |
| 48 | S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and directed. |
| 49 | S&F Aluminium handles cast type anodised 125 mm size complete all as specified and directed. |
| 50 | S&F Aluminium handles cast type anodised 150 mm size complete all as specified and directed. |
| 51 | S&F for 300mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc., complete all as specified and as directed. |
| 52 | S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 53 | S & F in repair aluminium door seal for snake guard with brush complete all as specified and as directed. |
| 54 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 55 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 56 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 57 | S&F continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed. |
| 58 | M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on new steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces. |
| 59 | M & L in repairs stainless steel curtain rods with L clamps and with suitable globe brackets and brass screws all as specified |
| 60 | S&F Sheet glass,4.8mm thick ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed. |
| 61 | S&F Sheet glass,4.8mm thick ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and directed. |
| 62 | S&Fpowder coated anodised aluminimum frames or shutter for doors, partititons, windows and ventilators and similar works with one or more rebates incl necessary fittings and fixtures such as jointing cleats, glazing clips, rubber packings, screws, hanldes stainless steel adjustable friction stay hines etc., as required fixed to aluminimum frame complete all as specified. Note: (i) Unit rate quoted shall deemed to inlclude cost of rubber beading, fittings such as handles, SS friction stay hines and fixing of glass wire and cloth decogrill etc., (ii) Glass wire cloth and grill to be measured and paid separately. |
| 63 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill toproper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 64 | S&F 12mm thick prelaminated particle board interior garade, prelaminated on both sides with decorative choice lamination fixed as in panels of aluminimum door shutters partitition complete all as specified and directed. |
| 65 | S&F Sheet glass,5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and directed. |
| 66 | S&F in repair aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed. |
| 67 | M& L in repairs Brass mortice lock vertical type size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as speicified and directed. |
| 68 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for complete all as specified and directed. |
| 69 | Dismantling false ceiling and wall panelling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 70 | Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 71 | Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 72 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm oflength 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threadedhanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall becarried out as per specifications, drawing complete all as specified and directed. |
| 73 | Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W(GdeE- 250) qualityA complete all as specified and directed. |
| 74 | Dismantiling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 75 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as speicied and directed. |
| 76 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 77 | S&F in repair stainless steel tubing of any diameter or square or rectangular in shape,thickness of wall not less than 1.6 mm of grade AISI-316 type Austhetic anticorrssive in nature as in framed work/Posts/fencing work/ railings/grills/designer work,purposily made doom and base welded with tubing where required including cutting, bending, welding, grinding, buffing and bright polishing the welded joints and adjacent areas and fixing in any type of location complete all as speccified and as directed. |
| 78 | S&F aluminimum flat 40x6mm size as wind tile fixed with 50mmx75mm aluminimum self tapping screws |
| 79 | Taking down 20mm Steel / CPVC tubing and connections complete all as specified and as directed |
| 80 | Taking down 25mm Steel / CPVC tubing and connections complete all as specified and as directed |
| 81 | Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified. |
| 82 | Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified. |
| 83 | M&L Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth |
| 84 | S&F in repairs Vitreous China wash down watercloset pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 85 | S&F Vitreous China wash down water closet pan (pedestal pattern) of size 380x610x805mm Rimless bowl with cistern for coupled, WC with UF soft close slim seat cover hinges, dual flush cistern fitting, conversion bend , fixing accessories and accessories set complete all as specified and as directed. Model No: Jaquar VGS-WHT 81753S250UFSMZ |
| 86 | S&F Wash basins including brackets, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 87 | S&F in repair vitreous china urinals, half stall type, all as sper Hindware cat part no.60022/60023 or equivalent complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flush cistern with brackets , flush pipe, grating and union for dischare pipe (inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 88 | S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed. |
| 89 | S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 90 | S&F in repair quarte turn two way Bip taps, cast copper ally, 15mm dia , chromium plated, fancy type for iron pipe and fixed etc., complete all as specified and directed. Make: Jaquar, Prayag, Parry ware( super fine), Prima, |Pearl |
| 91 | S&F in repair quarter turn Bip taps with flange, cast copper alloy, 15mm dia, chromium plated, Fancy type for iron pipe and fixed etc., complete all as specified and directed. Make:Jaquar/Prayag/Parry ware(Super fine), Prima, Pearl) |
| 92 | S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed. |
| 93 | S&F in repair angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore etc., complete all as specified and directed. Make: Jaquar, Prayag, Parry ware(Super fine), prima, Pearl) |
| 94 | S&F in repairs quarter turn pillar taps, cast copper alloy, chromium plated, Fancy type, 15mm diam, with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.Make Jaquar, Prayag, Parry ware (Super fine), Prima, Pearl |
| 95 | S&F in repair 15mm dia wall mixer cast copper alloy with capston heats chromium plasted screwed down hing pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality facy type complete all as specified and directed. |
| 96 | S&F in repairs brass chromium plated hand shower (Health faucet) ABS body) with 1 meter long Easy Flex tube in chrome finish & wall hook complete all as specified and directed. Make: Jaquar, Prayag, Parryware (Super fine), Prima, Pearl |
| 97 | S&F in repair soap dish, brass chromium plated of approximate size 160x160x90mm with screws complete all as specified and as directed. Make: Jaquar, Prayag, Parry ware (super fine), Prima, Pearl |
| 98 | S&F in repair CP toilet pater holder fancy type high quality Make Jaqar, Prayag, Parry ware (Super fine, prima Pearl complete all as specified and directed. |
| 99 | S&F in repair brass chromium plated shower rose with or withour swivel joint 100mm size complete all as specified and directed. Make Jaquar, Prayag, Parry ware (Super fine), prima, peral |
| 100 | S&F in repairs towel Rail CP Brass Make Prayag Cat No.BA 10 S or equivalent complete all as specified and directed. |
| 101 | S/F corner glass shelf 300mm, matt finished, chromium plated (MCH/Colour CP) with bracket etc.,of make-Jaquar complete all as specified and as directed. |
| 102 | S/F Towel ring round with round flange chromium plated of make-Jaquar complete all as specified and directed. |
| 103 | S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, all as specified. |
| 104 | S & F 600 mm X 450 mm levelled Edge Mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 105 | S & F PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and directed |
| 106 | S&F in repair PVC flexible waste pipe of 32mm for wash hand baisn and kitchen sink complelte all as specified and directed. |
| 107 | S&F in repair 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc., with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and dircted. |
| 108 | S&F in repair 32mm (Dia of discharege pipe) waste copling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60gms |
| 109 | S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm all as specified. |
| 110 | S & F Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed. |
| 111 | S&F fixed in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed. |
| 112 | S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 113 | Demolition and breaking up drain pipes of size 75/100 mm dia (Salt glazed ware, AC or Reinforced concrete, PVC (SWR)) set in cement mortar |
| 114 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 115 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 116 | S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 117 | S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or as in floors complete all as specified and as directed. |
| 118 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed. |
| 119 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 120 | S & F 75mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 121 | S & F 75 mm bore PVC [SWR] Junction Single [Single \\"T\\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 122 | S&F PVC (SWR) bends with access door 75mm dia |
| 123 | S & F 110mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 124 | S & F 110 mm bore PVC [SWR] Junction Single [Single \\"T\\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 125 | S&F PVC (SWR) bends with access door 110mm dia |
| 126 | S&F PVC (SWR) P trap complete all as specified and directed. Please Enable Macros to View BoQ information |
