|
| 1 | Taking down scrubs/vegitation growth from crevices completely upto any height and applying suitable chemical (herbicide) making good with PCC 1:2:4 or necessary plaster with CM 1:4 wiith WPC complete with all safety equipments etc., complete all as specified and as directed. |
| 2 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key etc., complete all as specified and as directed. |
| 3 | M&L for rendering 15mm thick plaster in CM (1:4) on brick/block or concrete surfaces finished even & smooth etc., complete all as specified and as directed. |
| 4 | M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth (without using extra cement) etc., complete all as specified and as directed. |
| 5 | M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth etc., complete all as specified and as directed. |
| 6 | Supply only Liquid water proofing compound ISI marked etc., complete all as specified and as directed. (Note : WPC may apply as per manufactures instructions or 3% by the wt of cement). |
| 7 | M&L for preparation of new plastered surfaces of wall and applying two coats of Distempering with 1st quality acrylic distemper ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour as per manufacturer's specification etc., complete all as specified and as directed. |
| 8 | M&L for newly plastered surfaces and applying two coats of oil bound distemper over a coat of Chalk whiting, on plastered surfaces of ceiling etc., complete all as specified and as directed. |
| 9 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.Make :- Asian Apex Ultima and Equivalent |
| 10 | M&L for applying a layer of 1mm thick wall care putty on wall and making surface even and smooth etc., complete all as specified and as directed. |
| 11 | Removing loose and broken concrete by chiseling/ mechanically etc from the roof slab, coloumn, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle safety precautions and scaffolding up to a height of 15 mtrs etc., etc complete all as specified by Engineer-in-Charge |
| 12 | S&F for Hard drawn steel wire fabric weight not exceeding 4 kg per square metre, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia welding to existing reinforcement etc., complete all as specified and as directed. |
| 13 | Supplying and applying two coats of High build hydrophobic polyurethane waterproofing coating on RCC slab / masonary wall applied of spray applied coating with GRACO EH 675DI having elongation of 600% as per ASTM D 412 and tensile strength of 4.0 MPa as per ASTM D 412, shore A Hardness of min. 60 as per ASTM C 836 and solid content by weight 90%. The system includes base preparation with one coat of epoxy primer resin and epoxy primer hardner. Apply polyurethane in two coats to achieve an average thickness of 1.2 mm to 1.5 mm thickness complete as per Manufacturere specifications.Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd |
| 14 | M/L for applying one coat of epoxy bonding coat as per manufacture's instruction to bind old concrete / masonary surfaces of soffit of slab, coloumn, beam and similar structural members for new gunited / cement surface. Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd |
| 15 | M/L for pressure guniting 40 mm average thickness in cement mortar 1:3 to all affected RCC structures including necessary scaffolding modyfying with mortar with admixture all as per manufacturer's instructions including making good as directed by the Engineer-in-Charge.Note:(i) The rate quoted shall include cost of admixture.Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd |
| 16 | Material and labour application of non shrink cementious micro concrete of dual shrinkage -compensated, high flow, pourable, single component for concrete repair with addition of 10mm down aggregate by 30% as in sides and soffits of beam, jacketing of coloumn, roof slab and similar structural members including necessary form work for fair finished surfaces. The form work shall be water tight to facilate pouring of micro concrete complete all as specified and as directed.. |
| 17 | M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on guniting/ roof/ masonary wall surface duly mixing polymer modifier polymer modified mortar complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions. Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd |
| 18 | M&L for applying curing compound on gunited surface for complete curing as per manufacturer's instructions.Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd |
| 19 | Cutting out existing cracks in concrete surfaces forming grooves of 25 mm X 40 mm size,cleaning the groove thoroughly with blower,applying primer coat of the mix of Base & Hardner with suitable brush to form a film on the surface of groove,filling the groove with putty made by mixing Base,Hardner and river sand and finally applying the sealing coat of the same mix and in the manner primer coat is applied. Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd |
| 20 | M&L for drilling 15mm dia holes in to RCC slab / wall / Column /beams to a depth of 100 to 150 mm & provide shear connector of 12 mm dia rod bent to \\"L\\" shape with 75mm to be embedded in holeof 100 mm to be used as dowel, fixed with polyster resin grout mixed mechanically and pour the same into the hole and insert the shear connector and finish the top; allow the same to set complete all as per manufacturer's instructions and as directed by Engineer-in-Charge.M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd |
| 21 | M&L for applying IPH RB -107 polymer based rust-remover (pH value –12 ) and applying IPH RB -167 Polymer based rust preventive (pH value-9) to all exposed reinforced bars etc., complete all as specified and as directed. |
| 22 | M&L for MS TMT bars 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooking for columns, hooking ends and and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc., complete all as specified and as directed. |
| 23 | M & L for preparing old surafce and applying a coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including piming coat of exterior primer applied @ 0.90 litrel 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 24 | M & L for preparing old surafce and applying a coals of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE colour with silicon additives @ 1,43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Westherpro+ Super Luxury Emulsion) Please Enable Macros to View BoQ information |
