|
| 1 | Electrical detailed cost Estimate for Suit Room at International Guest House under KU |
| 2 | Supplying and fixing 160 A 415 V, TPN SFU with sheet steel enclouser on angle iron frame on wall with nuts bolts etc incl. S&F 3 nos DIN type HRC Fuse as per rating (Make: L&T as directed by EIC )[For Main Incomer Ground Floor] |
| 3 | Supplying and fixing 415V, 100 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(Make: L&T as directed by EIC) (Ref:PWD Page No-D-3,Item No:4(a))(One for GF Panel O/G other for FF Panel I/C) |
| 4 | Supply & fixing 415V 200 A capacity MS (16 SWG) Busbar Chamber having dimension of (500x150mm) to be fixed on iron frame on wall consisting of 4 nos copper bars of size (4x40x5mm). The same BBC should have a separate cubicle at one end consisting 3 nos 200 A capacity porcelain cut out fuse unit & one nutral bar to receive the service cable including connecting the cut out fuse units with the BBC by S/F PVC insulated copper wire duly socketed at both ends incl. earthing attachment & painting. [Ref:PWD Page No-D-13,Item 19(b)](For Main Panel) |
| 5 | Supply & fixing double door 6 way Enclosure (8GB31572RC) Vertical TPNMCBDB (Siemens) with IP 42/43 protection SS enclosure on angle iron frame on wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire & nuetral link & provision of earthing attachment comprising of the following accessories (All make Siemens):a)125 A four pole MCCB of breaking capacity 25KA/ 35KA with adjustable thermal & fixed magnetic setting --- 01 nob) 63 A TP MCB /100 A TP MCB ----02 Nosc) 40 DP MCB --- 01 Nosc)6-32A SP MCB ---11 nos[Ref:PWD SOR :-Page No-D-8(Item No-10)Page No-D-6,(Item No-7)Page No-D-11(Item No-15)](For First Floor) |
| 6 | Supply & fixing 4 way double door horizontal TPN MCB DB with SS enclosure ( Cat no.8GB32202RC04 )(Siemns) concealed in wall after cutting the wall & mending good the damages to original finish with earthing attachment comprising with the following. a) 63 A Four Pole MCB isolator (Siemens) b) 6 to 32 A range SP MCB. (Siemens) ---12 Nos. [Ref:PWD SOR :-Page No-D-6(Item No-7)Page No-D-5,(Item No-6)Page No-D-10(Item No-14) ] |
| 7 | Supply & fixing SPN MCB DB (2+8) Way (Make Siemens) with S.S. Enclosure (8GB32102RC10) and IP-42/43 protection concealed in wall after cutting wall & mending good the damages & earthing attachment comprising with the following: a) 40 A DP isolator - 1 No. (Siemens) b) 6 to 32 A range SP MCB - 8 Nos.(Siemens)[Ref:PWD SOR Page No-D-5(Item No-6)Page No-D-6,(Item No-7)Page No-D-10(Item No-13)] |
| 8 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wireinside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire(synchronizing with roof/beam casting work of building construction)19 mm dia 3mm thick Polythene Pipe |
| 9 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wireinside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire(synchronizing with roof/beam casting work of buildingconstruction)25 mm dia 3mm thick Polythene Pipe |
| 10 | Cutting Channel of sizes (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge as per office supply pipe sample 19 mm bore, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG including supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles for the following sizes Pipes - **a)19 mm dia 3 mm thick polythene pipe without earth continuity wire(For circuit drawing & Point wiring / as per requirement of Job / as per instruction of EIC) NB - All rubbishes should be removed from work site & also Tee & Elbow should not be use in the conceal pipe,continuity wire.[Ref:PWD SOR Page No : E - 3 Item No : 6(a)] |
| 11 | Cutting Channel of sizes (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge as per office supply pipe sample 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG including supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles for the following sizes Pipes - **a) 25 mm dia 3 mm thick polythene pipe without earth continuity wire(For circuit drawing & Point wiring / as per requirement of Job / as per instruction of EIC) [E-3/6a & 7a)]NB - All rubbishes should be removed from work site & also Tee & Elbow should not be use in the conceal pipe,continuity wire. |
| 12 | Supply & drawing 1.1 KV single core stranded 'FR'/'FRLSH PVC insulated & unsheathed copper wire (Make Gloster or Brand approved by EIC) through prelaidpolythene pipe and by the prelaid GI fish wire/PVC rigid conduit 'FR' (Precision make) pipe on wall incl. making necy. connection as required & mending good the damages A) 4×16 sq mm + 2× 10 sq mm as ECC ( VTPNDB to TPNDB)**NB- Should be maintain colour combination of Circuit Wire |
| 13 | Supply & drawing 1.1 KV single core stranded 'FR'/'FRLSH PVC insulated & unsheathed copper wire (Make Gloster or Brand approved by EIC) through prelaidpolythene pipe and by the prelaid GI fish wire/PVC rigid conduit 'FR' (Precision make) pipe on wall incl. making necy. connection as required & mending good the damages B)2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC(TPNDB to SPNDB)**NB- Should be maintain colour combination of Circuit Wire |
| 14 | Supply & drawing 1.1 KV single core stranded 'FR'/'FRLSH PVC insulated & unsheathed copper wire (Make Gloster or Brand approved by EIC) through prelaidpolythene pipe and by the prelaid GI fish wire/PVC rigid conduit 'FR' (Precision make) pipe on wall incl. making necy. connection as required & mending good the damages (v)2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC ( for AC)**NB- Should be maintain colour combination of Circuit Wire |
| 15 | Supply & drawing 1.1 KV single core stranded 'FR'/'FRLSH PVC insulated & unsheathed copper wire (Make Gloster or Brand approved by EIC) through prelaidpolythene pipe and by the prelaid GI fish wire/PVC rigid conduit 'FR' (Precision make) pipe on wall incl. making necy. connection as required & mending good the damages t)2× 2.5 sqmm + 1× 1.5 sqmm.(For Computer Board )**NB- Should be maintain colour combination of Circuit Wire |
| 16 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.i) For 2.5 sq mm Copper Wire. |
| 17 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.i) For 4 sq mm Copper Wire. |
| 18 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.i) For 6 sq mm Copper Wire. |
| 19 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.i) For 10 sq mm Copper Wire. |
| 20 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i) For 16 sq mm Copper Wire. |
| 21 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded ''FR'/'FRLSH' PVC insulated & unsheathed copper wire ([ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, partly in 20 mm/25 mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19 mm bore, 3 mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC for ECC, to light/fan/call bell points with Modular type switch (Legrand Lincus/Myrus / Crabtree Verona/Athena /Brandapproved by EIC) fixed on Modular GI switch board (depth not less than 55 mm and sample approved by the office) complete with 2 nos. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed].Avarage Run 6 Mtr |
| 22 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded ''FR'/'FRLSH' PVC insulated & unsheathed copper wire ([ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, partly in 20 mm/25 mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19 mm bore, 3 mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC for ECC, to light/fan/call bell points with Modular type switch (Legrand Lincus/Myrus / Crabtree Verona/Athena /Brand approved by EIC) fixed on Modular GI switch board (depth not less than 55 mm and sample approved by the office) complete with 2 nos. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed].Avarage Run 8 Mtr |
| 23 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded ''FR'/'FRLSH' PVC insulated & unsheathed copper wire ([ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, partly in 20 mm/25 mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19 mm bore, 3 mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC for ECC, to light/fan/call bell points with Modular type switch (Legrand Lincus/Myrus / Crabtree Verona/Athena /Brandapproved by EIC) fixed on Modular GI switch board (depth not less than 55 mm and sample approved by the office) complete with 2 nos. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed].Avarage Run 9 Mtr |
| 24 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, in 19 mm bore, 3 mm thick polythen(Honda /Parrot / Brand approved by EIC)pipe complete with all accessories embedded in wall tolight/fan/call bell points with Modular type switch (Legrand Lincus/Myrus / Crabtree Verona/Athena /Brand approved by EIC) fixed on Modular GI switch board (Legrand/Crabtree) (depth not less than 55 mm and sample approved by the office) with top cover plate flushed in wall incl. mending good damages tooriginal finish.Avarage Run 6 Mtr |
| 25 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, in 19 mm bore, 3 mm thick polythene(Honda /Parrot / Brand approved by EIC)pipe complete with all accessories embedded in wall tolight/fan/call bell points with Modular type switch (Legrand Lincus/Myrus / Crabtree Verona/Athena /Brand approved by EIC) fixed on Modular GI switch board (Legrand/Crabtree) (depth not less than 55 mm and sample approved by the office) with top cover plate flushed in wall incl. mending good damages tooriginal finish.Avarage Run 7 Mtr |
| 26 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, in 19 mm bore, 3 mm thick polythen(Honda /Parrot / Brand approved by EIC) or in 20 mm size PVC rigid conduit 'FR' (Precision make),/ with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Modular type switch ( (Legrand Lincus/Myrus / Crabtree Verona/Athena /Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with topcover plate making earthing attachment fixed on wall incl. mending good damages to original finishAverage Run :9 mtr |
| 27 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire ( [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, in 19 mm bore, 3 mm thick polythene(Honda /Parrot / Brand approved by EIC) complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Legrand/Cabtree or Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl.mending good damages to original finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECCOn Board |
| 28 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire ( [ Make:Gloster / Finolex (Gold) or as equivalent approved by EIC] After Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes**NB- Should be maintain colour combination of Circuit Wire, in 19 mm bore, 3 mm thick polythene(Honda /Parrot / Brand approved by EIC) pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Legrand/Cabtree or Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Average run 4.5 mtr |
| 29 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand/Cabtree /Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc |
| 30 | Supply & fixing of Modular type Computer plug board of 12 module GI box with cover plate recessed in wall comprising of the following (Legrand/Cabtree /Brand approved by EIC):a) 16A Switch & 16A Socket ---1 set [3(b)+4(b)]x1b) 6A Switch - 3 nos & 6A Socket - 3 nos --- 1 set [3(a)+,4(a)]x3( Computer Board) |
| 31 | Supply & fixing Combo plug board modular type of 6 module GI box with cover plate recessed in wall comprising with the following (Legrand/Cabtree /Brand approved by EIC):(PWD Page No-E-17 ) ----- a) 16A socket --1 Nob) 16 A switch --1 NoSc) 6A socket --1 NoSd) 6 A switch --- 1 Nos |
| 32 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plugsocket (Legrand/Cabtree /Brand approved by EIC), without plug top and switch, with supply and fixing 2 module GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(For AC and Geyser) |
| 33 | Supply and Fixing of of 20/25A plug top for Split Ac Machine with necessary connection. |
| 34 | Fixing only lamp |
| 35 | Fixing only bulk head or ceiling fitting on wall /ceiling by screws etc. |
| 36 | Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener |
| 37 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MSclamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length |
| 38 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand/Cabtree /Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 39 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rodduly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. |
| 40 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 41 | Supply & Fixing AL louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)23 cm (9\\") |
| 42 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9\\") |
| 43 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. |
| 44 | Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. paste & jointing materials .3.5 Core 50 sqmm |
| 45 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting2 Core 6 Sq mm ( Out Door Light) |
| 46 | Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. asnecy., mending good damages and painting3.5 Core 50 sqmm |
| 47 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 3.5 Core 50 sqmm |
| 48 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3.5 Core 50 sqmm |
| 49 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 Core 6 sqmm (For Outdoor Light Light) |
| 50 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 6 sqmm (For Outdoor Light Light) |
| 51 | Excavation of soil for installation of Earth Electrode and filling & ramming.( For Soft Soil.) |
| 52 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe |
| 53 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 54 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 55 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. |
| 56 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required : 40 mm dia |
| 57 | Supply and delivery of 3.5 core 50 sqmm 1.1 KV grade aluminium XLPE Sheathed Armoured Aluminium Power Cable. (Make- Gloster )( Ref:Non Schedule Item ) |
| 58 | Supply and delivery of 2 core 6 sqmm 1.1 KV grade aluminium XLPE armoured cable (Make- Gloster )( Ref:Non Schedule Item ) |
| 59 | Supply of 4' 20W Single LED Aluminium T8 tube (LTT8) with in built driver and efficacy of 100 lm/W. type tube light fitting on High efficiency integrated LED Batten to create a sustainable lighting environment with surface/suspended mounting, complete with all acessaries directly on ceiling with HW round block & suitable size of MS fastener (Make: Crompton -Batten (ECO-I)-IGP161LT8-16 1 x T8, Tube-CRYSTA LTT8-20-865-2)( Ref:Non Schedule Item ) |
| 60 | Supply of recessed mounted LED 36 W 4000K dimension (mm) l |b | h =600 | 600 |60 low glare diffuser light on ceilling complete set.[Make:K-Lite Cat No:-KL-2281 )( Ref:Non Schedule Item ) |
| 61 | Supply and delivery of 1200 mm sweep, single phase, 240 Volt, 50 Hz Ac Ceiling Fan including down rod, top and buttom canopy, capacitor etc. (Make- Usha Striker PWD ISI 1 Star(Safety wire & S1 Capacitor)( Ref:Non Schedule Items ) |
| 62 | Supply and delivery of 4 Metal Blade 450 mm sweep, single phase, 240 Volt, 85 W 50 Hz Ac Wall Fan including all accessories . (Make- EPC)( Ref:Non Schedule Item ) |
| 63 | Supply & Fixing 240 V, 25 A, Modular type AC m/c starter (Eletron OLP - 3+) 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire.OLP-3+ Automatic single phase motor starter with VOLTCHECK, AMPCHECK & TIMECHECK and 3-digit display, 25A (Make-Electron) (For AC m/c). |
| 64 | Supply of 85 mm 12 W trim single recessed mounted die cast Aluminium extruded powder coated high efficient polycarbonate diffuser LED chrome reflector light in round shape with for uniform lighting, complete with all acessaries (LED Colour Temperature : 3000K / 4000K / 5700K)(Make:K-LITE Platina Mini ID-23328) |
| 65 | Supply of 58 mm 6 W trim single recessed mounted die cast Aluminium extruded powder coated high efficient polycarbonate diffuser LED chrome reflector light in round shape with for uniform lighting, complete with all acessaries ( LED Colour Temperature : 3000K / 4000K / 5700K)(Make:K-LITE Platina Mini ID-23327) |
| 66 | Supply of recessed mounted LED 3 W High-Grade Aluminium with Die-cast Endcaps body with polycarbonate diffuser vaccuem metalised chrome finished square shape with for uniform lighting, complete with all acessaries ( LED Colour Temperature : 3000K / 4000K / 5700K) [Make :K-LITE Lie n Dot ID-23369)] |
| 67 | Supply of recessed mounted LED 6 W High-Grade Aluminium with Die-cast Endcaps body with polycarbonate diffuser vaccuem metalised chrome finished square shape with for uniform lighting, complete with all acessaries ( LED Colour Temperature : 3000K / 4000K / 5700K) [Make :K-LITE Lie n Dot ID-23379)] |
| 68 | Supply of recessed mounted LED 12 W High-Grade Aluminium with Die-cast Endcaps body with polycarbonate diffuser vaccuem metalised chrome finished square shape with for uniform lighting, complete with all acessaries ( LED Colour Temperature : 3000K / 4000K / 5700K) [Make :K-LITE Lie n Dot ID-23371)] |
| 69 | Supply of 20 W /m LED light of 2 meter length for wall paneling powder coated aluminum profile with PMMA extruded lens which provides a high degree of robustness for optimum light distribution from ceiling or wall with proper beam angle with standard suspension kit and complete with all accessories.[Make: K-lite Mini grazer ID-22828 ] |
| 70 | Supply of LED 12 W/m strips with high lumen output for coloured or white light are easy to install and create dynamic effects for room used for false ceilling[Make: K-lite LED Strips ID-27282 ] |
| 71 | Supply of 2x 6 W LED (4000K/6000K) Rectangular /Circulartype wall WALL QUAD MINI mounted IP 65 up-down luminaire made of high grade aluminium extrusion & die cast aluminium heatsink for effective heat dissipation with high efficient COB for better output. Theluminiare comes with toughened glass.[Make :K-lite 2X 6W W32 WALL QUAD MINI ] |
| 72 | Supply of LED 7 W (300K) picture light with Flexible neck for adjusting beam, Bronze finish for superior feel, Long life LED light source[Make Philips ( Muziris 7W Picture Light Cat No:Model No. 31402/Crompton] |
| 73 | 18% GST |
| 74 | 1% CESS Please Enable Macros to View BoQ information |
