|
| 1 | PART A APPROACH ROAD + PART B ADDITIONAL APPROACH ROAD Construction of embankment with approved material obtained from borrow pits with all lift and lead upto 1.00 km, Transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.2 ( Cartage Earth work 1 Km) The Compacted thickness of each layer shall not be more than 200 mm (Including labour cess but Excluding GST) |
| 2 | Providing, laying, spreading Material on prepared sub grade by adding cement @ 2% by weight of the spread Material manually by mixing in place with rotavator compacting with vi roller at OMC to achieve the desired unconfined compressive strength and form a layer of subbase. (Including labour cess, Royalty but Excluding GST) |
| 3 | Providing, laying and spreading Material on prepared sub base adding cement @ 4% by weight of the spread Material manually by mixing in place with rotavator compacting with road roller at OMC to achieve the desired unconfined compressive strength and form a layer of base. (Including labour cess, Royalty but Excluding GST) |
| 4 | Providing and applying tack coat with Bitumen VG10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MORD Specification Clause 503. (Including labour cess but Excluding GST) |
| 5 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen VG 10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per MORD Specification Clause 508. (Including labour cess, Royalty but Excluding GST) |
| 6 | Providing and laying seal coat sealing the voids in a bituminous VG10 surface laid to the specified levels, grade and cross fall using Type C as per MORD Specification Clause 510 (Including labour cess, Royalty but Excluding GST) |
| 7 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lift upto 1.50 m & lead upto 30 m as per Technical Specification Clause 303.1. (Including labour cess but Excluding GST) |
| 8 | PART C MINER BRIDGE WORK Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Including labour cess but Excluding GST) |
| 9 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of, Reinforced cement concrete, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Including labour cess but Excluding GST) |
| 10 | Construction of granular sub-base Dismentelled Material of Existing culvert by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(Only Labour Work) For Diversion (Including labour cess, Royalty but Excluding GST) |
| 11 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (Including labour cess but Excluding GST) |
| 12 | Local Sand Filling in Foundation Trenches as per Drawing & Technical Specification (Including labour cess, Royalty but Excluding GST) |
| 13 | Plain cement concrete 1:3:6 nominal mix OPC Grade 43 in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (Including labour cess, Royalty but Excluding GST) |
| 14 | Brick Masonry Work in Cement Mortar 1:3 OPC Grade 43 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. (Including labour cess, Royalty but Excluding GST) |
| 15 | Reinforced Cement Concrete M 30 Grade OPC Grade 43 in Open Foundation complete as per Drawing and Technical Specifications. (Including labour cess, Royalty but Excluding GST) |
| 16 | Reinforced Cement Concrete M 30 Grade OPC Grade 43 in Wall & Slabe. Including All Hieght as per Drawing and Technical Specifications. (Including labour cess, Royalty but Excluding GST) |
| 17 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in All Plasces complete as per Drawing and Technical Specifications. (Including labour cess but Excluding GST) |
| 18 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications (Including labour cess, Royalty but Excluding GST) |
| 19 | Providing & Fixing 0f Drainage Spouts complete as per drawing and Technical specification including All Cost of Material Labour T & P etc Complete (Including labour cess, Royalty but Excluding GST) |
| 20 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification (Including labour cess, Royalty but Excluding GST) |
| 21 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC Heavy Class pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications (Including labour cess, Royalty but Excluding GST) |
| 22 | Back filling of Sandy Material behind abutment, wing wall and return wall complete as per drawing and Technical Specification (Including labour cess, Royalty but Excluding GST) |
| 23 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. (Including labour cess, Royalty but Excluding GST) |
| 24 | Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing Not less than 40 kg laid dry complete as per drawing and MORD specifications Clause 1301 (Including labour cess, Royalty but Excluding GST) |
| 25 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 (Including labour cess, Royalty but Excluding GST) |
| 26 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Including labour cess, Royalty but Excluding GST) |
| 27 | Providing and laying RCC Hume Pipe- 1000 mm dia NP3 (For Diversion ) (Including labour cess but Excluding GST) Please Enable Macros to View BoQ information |
