|
| 1 | Providing and fixing two-way bib cock of approved make jaquar-FLR-CHR-5041N or Equivalent make etc,all complete. as per directions of Engineer-In-charge : |
| 2 | Providing and fixing Bottle trap (Escco Make-ESSCO ALE-773NL) or Equivalent make with necessary fittings all complete etc,all complete. as per directions of Engineer-In-charge : |
| 3 | 32 mm diameter |
| 4 | Providing and fixing of WC seat cover suitable for existing our EWC Including removal of existing fixtures and fitting the new with all necessary fittings,etc all Complete as per the directions of Engineer in charge |
| 5 | Providing and fixing the jaquar WC including seat cover and fittings and it is suitable for our existing flush tank,Including opening of the existing WC and fixing the new set with all fixtures,Complete.. as per directions of Engineer-In-charge : |
| 6 | Providing and fixing Flush Plate with push buttons and its Brackets and Screws and it is suitable for our existing concealed flush tank all Complete including necessary fittings etc as per directions of Engineer-In-charge : |
| 7 | Providing and fixing of CP grating of approved quality etc ,complete as per the directions of Engineer-in-Charge: |
| 8 | Providing and fixing Parryware or eqivalent make wash basin with C.I. brackets, 15 mm C.P. brass pillar cera victor F1015101CHor equivalent make , 32 mm C.P.brass waste of standard pattern, including brackets , painting of fittings and brackets,flanges cutting and making good the walls wherever require: |
| 9 | Providing and fixing of indicator lock set for bathroom partitions of approved make etc,all complete as per the directions of Engineer in Charge. |
| 10 | Providing and fixing15 mm C.P. brass pillar cera victor F1015101CHor equivalent make of approved make all complete as per the directions of Engineer in Charge. |
| 11 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers with ss struds complete. |
| 12 | Providing and fixing syphon set of approved make and it is suitable for existing concealed flush tank with necessary fittings etc, all complete as per the directions of Engineer in Charge. |
| 13 | Providing and fixing float valve/ball valve set of approved make and it is suitable for existing concealed flush tank with necessary fittings etc, all complete as per the directions of Engineer in Charge. |
| 14 | Providing and fixing angle valve inside flush tank and it is suitable for existing concealed flush tank with necessary fittings etc of approved make all complete as per the directions of Engineer in Charge. |
| 15 | Providing and fixing of ABS body Health faucet with wall hook and 1 metre length PVC hose pipe etc. of approved make CERA F 8030108AB or Equivalent make as directed by Engineer In-Charge. |
| 16 | Providing and fixing 2Nos Flush Plate push buttons rod/ plate cover rods of 9 inch length and it is suitable for our existing concealed flush tank all Complete including necessary fittings etc as per directions of Engineer-In-charge : |
| 17 | Providing and fixing seat cover fittings and it is suitable for our existing wc seat cover all Complete including necessary fittings etc as per directions of Engineer-In-charge : |
| 18 | Providing and fixing ss connection pipe and it is suitable for our existing fittings etc all Complete including necessary fittings etc as per directions of Engineer-In-charge : |
| 19 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqmincluding both side) consisting of main 'T' runner suitably spaced at jointsto get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross \\"T\\" of size24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spacedbetween main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm madeof 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugsat 450 mm centre to centre with 25 mm long dry wall screws @ 230 mminterval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T'. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. sqm 2158.15 Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermalconductivity <0.043 w/mK. |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | 12 mm cement plaster finished with a floating coat of neat cement of mix |
| 22 | 1:3 (1 cement: 3 fine sand) |
| 23 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 24 | One Coat |
| 25 | Providing and fixing 2 Nos suitable MS Bolts for WC fixing all Complete including necessary machinary etc as per directions of Engineer-In-charge : |
| 26 | Supply of Unskilled manpower for repair works for continous leakage WC like removing of existing wc by dismantling concrete and tiles all around WC ,removing damaged pipes ,loose bolts in concrete and shifting of dismantiled concrete debris and tiles to ground floor and other miscellaneous works all complete as per the directions of Engineer in Charge. |
| 27 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
