|
| 1 | WOODEN FURNITURE : Taking down worned out components of the following furniture items, S&F new component without having any defect as per shape and size as specified and shown on respective drawings and as directed by Engineer-in-charge |
| 2 | BED PLYTOP WOODEN (FD 246/247) , |
| 3 | Head rest complete |
| 4 | Foot Rest complete |
| 5 | Long rail |
| 6 | Short rail |
| 7 | Stiffener |
| 8 | Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw |
| 9 | 12mm thick BWR Ply wood top in one piece |
| 10 | CHAIR DINING (FD-203/279) |
| 11 | Rear Leg |
| 12 | Front Leg |
| 13 | Side rail with holes for weaving |
| 14 | Front/back rail with holes for weaving |
| 15 | Bottom stiffener |
| 16 | Back stiffener |
| 17 | Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 18 | PVC Shoe as per sample approved |
| 19 | Chair Dining for JCO/OR FD/MAP-II/05 |
| 20 | Rear Leg |
| 21 | Front Leg |
| 22 | Side rail with arrangement for fixing of PVC Sheet |
| 23 | Front/back rail with arrangement for fixing of PVC Sheet |
| 24 | Bottom stiffener |
| 25 | Back stiffener |
| 26 | PVC seat of Make : Amko/Cello as approved by Enginner-in-Charge |
| 27 | Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 28 | PVC Shoe as per sample approved |
| 29 | TABLE DRESSING GENTS(FD-230/379) |
| 30 | Looking glass complete with frame and back plywood. |
| 31 | Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom |
| 32 | Knob as per sample approved |
| 33 | CHAIR WRITING (FD-261/280) |
| 34 | Rear legs |
| 35 | Front Legs |
| 36 | Side rail with holes for weaving (spacing of holes shall be as per old one) |
| 37 | Front/back rail with holes for weaving (spacing of holes shall be as per old one) |
| 38 | Bottom stiffener |
| 39 | Back stiffener |
| 40 | Arm rest |
| 41 | Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 42 | PVC Shoe as per sample approved |
| 43 | CHAIR WRITING Cushioned FD-1107 |
| 44 | Rear legs |
| 45 | Front Legs |
| 46 | Side rail |
| 47 | Front/back rail |
| 48 | Bottom stiffener |
| 49 | Seat made out of 75mm foam cushioned of 40 density covered with fabric as approved by Engr-in-Charge fixed on12mm thick ply |
| 50 | Arm rest |
| 51 | Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 52 | PVC Shoe as per sample approved |
| 53 | PEG TABLE MAP, (FD/E6/MAP/11) |
| 54 | Long rail |
| 55 | Short rail |
| 56 | Side stiffener |
| 57 | Provn of wooden Triangular bracket of size 75x75x20mm at joint of leg and rail of peg table made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge |
| 58 | Top made of 18/19mm thick both side prelaminated particle board having surface colour as approved with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 59 | PVC/Rubber Shoe as per sample approved |
| 60 | CHAIR EASY(FD-229) |
| 61 | Rear Leg |
| 62 | Front Leg |
| 63 | Side Rail |
| 64 | Front/Back Rail |
| 65 | Arms rest |
| 66 | PVC Shoe as per sample approved |
| 67 | TEAPOY (FD-278/382) |
| 68 | Long rail |
| 69 | Short rail |
| 70 | Side stiffener |
| 71 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 72 | PVC Shoe as per sample approved |
| 73 | Provn of wooden tringular bracket of size 75x75x30mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 74 | PEG TABLE (FD-236/277/384) |
| 75 | Long rail |
| 76 | Short rail |
| 77 | Side stiffener |
| 78 | Provn of wooden tringular bracket of size 75x75x20mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 79 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 80 | PVC Shoe as per sample approved |
| 81 | Table writing (FD-275) |
| 82 | Long rail |
| 83 | Short rail |
| 84 | Bottom centre stiffener |
| 85 | Bottom side stiffener. |
| 86 | Side of the box out of 18mm thick prelaminated particle board |
| 87 | Back of the box out of 6mm thick one side teak face commercial plywood. |
| 88 | Drawer as specified in drawing |
| 89 | Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 90 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 91 | PVC Shoe as per sample approved |
| 92 | TABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284) |
| 93 | Long Rail |
| 94 | Short Rail |
| 95 | Bottom Side stiffener |
| 96 | Bottom Centre stiffener |
| 97 | Drawer as specified in drawing |
| 98 | Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 99 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 100 | PVC Shoe as per sample approved |
| 101 | TABLE DINING 06 PERSON( FD-239/273) |
| 102 | Long rail |
| 103 | Short rail |
| 104 | Stiffener |
| 105 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 106 | Provn of wooden tringular bracket of size 75x75x40mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 107 | PVC Shoe as per sample approved |
| 108 | TABLE DINING 04 PERSON( FD/MAP/09) |
| 109 | Long rail |
| 110 | Short rail |
| 111 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 112 | Provn of wooden tringular bracket of size 75x75x40mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 113 | PVC Shoe as per sample approved |
| 114 | TABLE DINING 08 PERSON( FD-239/273) |
| 115 | Long rail |
| 116 | Short rail |
| 117 | Stiffener |
| 118 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 119 | Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge |
| 120 | PVC Shoe as per sample approved |
| 121 | Table 2' x 2' |
| 122 | Long rail |
| 123 | Short rail |
| 124 | Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 125 | Provn of wooden tringular bracket of size 75mm x 75mm to made out of 35mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge |
| 126 | PVC/Rubber Shoe as per sample approved |
| 127 | Sofa Set 5 Seater (TP)Removal of unserviceable seat and back rexine cloth/ taperstry cloth of (250 GSM) and cushion of Sofa set 5 seater and S & F with new cushion 100mm thick of polyurethane foam density 40 Kg/ Cum (40 density) Make of foam Dunlop / sleepwell/ Kurlon covered with new fabric of acrylic / polyester / polypropylene of rexine cloth / new tapestry cloth of approved make / shade duly providing quality all as specified and shown in drawing and as directed by Engr-in-charge |
| 128 | As per item No. 18.00 above but for Sofa set single seater |
| 129 | SIDE BOARD (FD-241/371) |
| 130 | Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top |
| 131 | Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top |
| 132 | Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top |
| 133 | Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom |
| 134 | Shutter made of 18mm thick prelaminated particle Board with hinges |
| 135 | Back made of 6mm thick commercial plywood. |
| 136 | Bottom frame with 4 Nos of legs shall be made of Ist class hard wood |
| 137 | Knob as per sample approved |
| 138 | TABLE CENTRE (FD-274/375)/MAP |
| 139 | Long rail |
| 140 | Short rail |
| 141 | Side stiffener |
| 142 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 143 | Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge |
| 144 | PVC Shoe as per sample approved |
| 145 | Book Case Small FD-237 |
| 146 | Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top |
| 147 | Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top |
| 148 | Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top |
| 149 | Shutter made of 18mm thick prelaminated particle Board with hinges |
| 150 | Back made of 6mm thick commercial plywood. |
| 151 | Bottom frame with 4 Nos of legs shall be made of Ist class hard wood |
| 152 | Knob as per sample approved |
| 153 | Benck Wksp All type |
| 154 | Long rail |
| 155 | Short rail |
| 156 | Stiffener |
| 157 | Top Plank size 1800mm x 255mm x 25mm to Foam with back made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos) |
| 158 | PVC Shoe as per sample approved |
| 159 | TABLE 900mm x 900mm (FD-291) |
| 160 | Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge |
| 161 | Provn of wooden tringular bracket of size 75mm x 75mm made out of 35mm thick hard wood and shall be fixed as directed by Engineer-in-Charge |
| 162 | PVC Shoe as per sample approved |
| 163 | Bin linen multipurpose FD/E6/MAP/09 |
| 164 | Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top |
| 165 | Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top |
| 166 | Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top |
| 167 | Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom |
| 168 | Shutter made of 18mm thick prelaminated particle Board with hinges |
| 169 | Back made of 6mm thick commercial plywood. |
| 170 | Bottom frame with 4 Nos of legs shall be made of Ist class hard wood |
| 171 | Handle SS as per sample approved |
| 172 | Hat Stand with Mirror (FD-FD-233/361/FD-362) |
| 173 | 5mm thick Mirror of size 300mmx440mm . |
| 174 | 4mm thick commercial plywood for back |
| 175 | Stainless steel MS pegs with screw as per sample approved |
| 176 | SOFA SET (FD-281/373/1113/FD/MAP-II/02) |
| 177 | Foam cushion for sofa set size 525x525x100mm, 40 density, Make-Sleepwell/ Kurlon duly covered with best quality tapestry clothof 250 (GSM)as approved by Engineer-in-Charge complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 450/- per RM |
| 178 | Table Bedside (FD/E-6/MAP/15 (R) / FD/MAP/01 |
| 179 | Top made of 18mm thick prelaminated particle board |
| 180 | Side 18mm thick prelaminated particle board |
| 181 | Back ply of 6mm thick commercial plywood of existing shape & size |
| 182 | Drawers as specified |
| 183 | Stainless steel Handle 100mm long |
| 184 | Telescopic channel of good quality. |
| 185 | TABLE DRESSING LADIES INCL STOOL(MAP) (FD/MAP-II/07) |
| 186 | 5mm thick Mirror of size as per drawing with Back ply of 6mm thick commercial plywood |
| 187 | Sliding glass shutter of 3mm thick as per existing size. |
| 188 | Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated particle board as per existing shape and size with telescopic channel |
| 189 | Foam cushion 75mm, 40 density covered with fabric on seat to be fixed on 12mm thick plywood on stool as per existing shape and size |
| 190 | Wheel at the bottom of stool as per existing shape and size |
| 191 | CHAIR DINING OFFICERS (FD/E6/MAP/10 & FD/MAP/-II/04) |
| 192 | Rear Leg |
| 193 | Front Legs |
| 194 | Back rail of seat frame |
| 195 | Front/side rails of seat frame |
| 196 | Seat made out of 75mm foam cushioned of 40 density covered with fabric as approved by Engr-in-Charge fixed on12mm thick ply |
| 197 | Bottom stiffener |
| 198 | Vertical back stiffener |
| 199 | Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge |
| 200 | PVC Shoe as per sample approved |
| 201 | RE-CANNING OF CHAIRS : Re-canning of wooden chairs as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge. |
| 202 | Sofa Set 3/4/5 Seats FD 281/373/1113 /FD/MAP-II/02Supply wood and fixing of the fwg new parts after removing broken/unserviceable parts of well seasoned teak wood including tighting other parts of well seasoned teak wood with screw/bamboo pins only of the sofa complete all as specified in drawing & directed by Engineer-in-charge. |
| 203 | Front legs for three/single seater sofa |
| 204 | Rear legs for three/single seater sofa |
| 205 | Long front & Back rail for three seater sofa |
| 206 | Long front & Back rail for single seater sofa |
| 207 | Stiffner for three/single seater sofa |
| 208 | Side short rail for three/single seater sofa |
| 209 | Arms rest for three /single seater sofa. |
| 210 | plywood 10mm for three seater sofa. |
| 211 | plywood 10mm for single seater sofa. |
| 212 | Polishing of Wooden Furniture Items : All wooden surfaces of the following wooden furniture items wheather exposed to view or not when placed in position shall be polished with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required. |
| 213 | Bed Plytop wooden - FD 246 |
| 214 | Chair Dining FD-228/270/279 |
| 215 | Chair Writing FD/261/280 |
| 216 | Chair Easy FD-229 |
| 217 | Chair Dining for JCO/OR FD/MAP-II/05 |
| 218 | Teapoy (FD-278/382) |
| 219 | Peg Table (FD-236/277/384) |
| 220 | Table Writing (FD-275) |
| 221 | Table 900x600mm with drawer/without drawer |
| 222 | Table Dining 6 presons (FD-239/273) |
| 223 | Table Dining 8 presons (FD-239/273) |
| 224 | Side Board (FD-241/371) |
| 225 | Table Centre FD-274/375) |
| 226 | Book Case (FD-147) |
| 227 | Hat Stand with Mirror (FD-FD-233/361/FD-362) |
| 228 | Sofa Single Seater |
| 229 | Sofa Set 4 Seater (FD-281/373) |
| 230 | Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02) |
| 231 | TABLE 900mm x 900mm (FD-291) |
| 232 | Table 2' x 2' |
| 233 | Bin linen multipurpose FD/E6/MAP/09 |
| 234 | Chair writing Cushioned FD-1107 |
| 235 | TABLE DINING 04 PERSON( FD/MAP/09) |
| 236 | Benck Wksp All type |
| 237 | PEG TABLE MAP, (FD/E6/MAP/11) Please Enable Macros to View BoQ information |
