|
| 1 | WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.) |
| 2 | G.I. Channel 100x 50x6 mm channel |
| 3 | G.I. Flat 50x6 mm |
| 4 | Danger board 11kv |
| 5 | G.I. Flat 25x3 mm |
| 6 | GI standard wire Barbed wire |
| 7 | 11 KV pin insulator polymer 20mm FRP dia |
| 8 | H W fitting (B&S)70KN(3bolted) |
| 9 | Disc insulator (B&S)70 KN polymer |
| 10 | Earthing of Support ( Coil Type ) |
| 11 | No-8 GI wire (Dia 4.06mm) For connecting pole with Coil earthing |
| 12 | WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR |
| 13 | POLYCARBONATE BIRD GUARD |
| 14 | HT stay Clamp 150x150 mm RS joist |
| 15 | HT stay set complete |
| 16 | HT stay insulator TYPE-C |
| 17 | 7/10 SWG GI stay wire, Grade -2 (15Kg./ Set) |
| 18 | GI Nuts & Bolts of Assorted size |
| 19 | Black Colour Paint with barrel |
| 20 | Enamel Paint with Yellow |
| 21 | Installation of 11kv stay set with concrete |
| 22 | Laying of PCC (M-20 Grade) |
| 23 | WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.) |
| 24 | HT cross arm V shape for 11Kv(GI) |
| 25 | Top hamper 11kv cross arm |
| 26 | Danger board 11kv |
| 27 | G.I. Flat 25x3 mm |
| 28 | GI standard wire Barbed wire |
| 29 | 11 KV pin insulator polymer 20mm FRP dia |
| 30 | Earthing of Support ( Coil Type ) |
| 31 | No-8 GI wire (Dia 4.06mm) For connecting pole with Coil earthing |
| 32 | GI Nuts & Bolts of Assorted size |
| 33 | Conductor Rabbit AAAC 55Sqmm |
| 34 | Black Colour Paint with barrel |
| 35 | Enamel Paint with Yellow |
| 36 | POLYCARBONATE BIRD GUARD |
| 37 | Laying of PCC (M-20 Grade) |
| 38 | WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.) |
| 39 | G.I. Channel 100x 50x6 mm channel |
| 40 | G.I. Flat 50x6 mm |
| 41 | G.I. Channel 75x 40x4.8 mm channel |
| 42 | G.I. Angle 50x 50x6 mm channel |
| 43 | Transformer 100KVA 11/0.4 KV |
| 44 | LT Distribution box 100KVA S/S 11/0.4 KV |
| 45 | AAAC 11KV XLPE insul.covered CDTR 55 Sqmm |
| 46 | Cable LT 1.1 kv XLPE AL 4Cx 150 sqmm Armoured |
| 47 | AB Switch(11KV,200A.3pole,50Hz) trip. Pole gang ope. |
| 48 | H.G.Fuse( 11KV.200A.3Pole)3 phase |
| 49 | WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR |
| 50 | POLYCARBONATE BIRD GUARD |
| 51 | Disc insulator (B&S)70 KN polymer |
| 52 | H W fitting (B&S)70KN(3bolted) |
| 53 | Lightning Arrester(12KV,10KA) Station Class 2 |
| 54 | 11KV pin insulator polymer |
| 55 | HT stay set complete |
| 56 | HT stay Clamp (1.9Kg/pair) |
| 57 | HT stay insulator TYPE-C |
| 58 | 7/10 SWG GI stay wire, Grade -2 7/3.25mm |
| 59 | 40 mm Nominal bore GI pipe (medium gauge) earthing device with 3 mtr .Long |
| 60 | GI Nuts & Bolts of Assorted size (25 Kg/ DSS DP) |
| 61 | GI Barbed wire/Anticlimbing device (3Kg /Pole) |
| 62 | G.I. Flat 25x3 mm |
| 63 | Danger board 11kv |
| 64 | C.T W/O Name plate |
| 65 | Enamel Paint with Yellow |
| 66 | Black Colour Paint with barrel |
| 67 | Laying of PCC (M-20 Grade) |
| 68 | PCC 1:3:6 |
| 69 | Installation of 11kv stay set with concrete |
| 70 | Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earthresistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI)around pipe . |
| 71 | Laying of 1.1 KV cable upto 185 sqmm to 400 sqmm |
| 72 | SITC and Erection of GI Fencing with Gate |
| 73 | Construction of TRF plinth for 100KVA |
| 74 | Supply of AL Lugs suitable for 185 sq mm cable/conductor, Crimping with cable and Fixing/connecting include supply and erection of PVC Tape as per voltage requirement. |
| 75 | Supply and erection of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 120-185sqmm including making hole in Base plate and dressing of cable along with vermin proofing properly .Supply to be done as per TPCODL Spec and approved make dowells. |
| 76 | Dismantling of RSJ/WPB Pole (116x100mm) |
| 77 | Dismantling of 11KV GI pin with insulator |
| 78 | Dismantling of 11kV Disc Insulator with Hardware |
| 79 | Dismantling of 34/55mm2 AAA conductor & return Please Enable Macros to View BoQ information |
