|
| 1 | Earthwork in excavation of foundation trenches in all kinds of soil with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 2 | Supplying, Filling foundation and plinth with good coarse river sand well watered and rammed with cost of all labour, material, T&P, taxes, royalties etc. complete in all respect as per the direction of Engineer-in-charge. |
| 3 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size downgraded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 4 | .C.C. work of M-15 having minimum compressive strength of 200kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge (but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.) |
| 5 | Supplying fitting & fixing Pre cast Kerb stone of size 300mmx300mmx150mm of M30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge. |
| 6 | Providing and laying 60mm thick cement concrete inter locking paver block of M30 grade of approved shade & design having minimum compressive strength 35N/mm2 over a layer of 30mm thick compacted sand laid over subbase compacted with vibrater including cost of all material, labour and all taxes etc. all complete and as per the direction Engineer-in-Charge. |
| 7 | Carriage of debris or surplus earth by mechanical means within a lead of 5km excluding the loading etc. complete as required for the work complete as per direction of Engineer-in-charge. |
| 8 | Construction of granular sub-base by providing coarse graded Material grade IV, spreading in uniform layers on prepared surface,mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 501 and spreading the same with motor grader of adequate capacity with hydraulic controlled blades & compacting the same with vibratory roller of minimum 80 to 100KN static weight or of equivalent capacity, to achieve minimum required density of technical specification for Road & Bridge works MORT&H (5th revision) including cost and conveyance of all materials, labour, T&P, royalty and taxes etc. as required for the work complete as per direction of Engineer-in-charge. |
| 9 | Fabrication and manufacturing of solid precast concrete element including cost of reinforcement with transportation from factory to worksite including lifting & laying by crane of 35.00 ton fixing in position with jointing material etc. complete as per spcification and direction of Engineer-in-Charge. |
| 10 | Sypplying fittibnf & Fixing RCC bench of approved size,colour & specification including cost of all etc. complete as per spcification and direction of Engineer-in-Charge. |
| 11 | Sypplying fittibnf & Fixing following GYM Equipment of approved size,colour & specification including cost of all etc. complete as per spcification and direction of Engineer-in-Charge. |
| 12 | Air walker |
| 13 | ABB Cruch or sit up bench |
| 14 | Air swing |
| 15 | Twister |
| 16 | Glider or set back |
| 17 | Push n pull up Chair |
| 18 | Knee/Hip raise on parallel bars |
| 19 | Big shoulder wheel |
| 20 | Spinner |
| 21 | Bench with fixed Weightlift |
| 22 | Bench with fixed Dumbell |
| 23 | Providing, supplying and laying Design Mix Reinforced Cement Concrete with grade M25 using graded crushed stone aggregates, coarse sand, cement of approved quality in substructure using weigh batching, mechanically mixing, vibrating, centering & shuttering, de-centering using tools & plant equipments & machinery required for the work as per technical specification for Road & Bridge works MORT&H (5th revision) including cost and conveyance of all materials, labour, T&P, royalty and taxes etc. as required for the work complete as per direction of Engineer-in-charge. |
| 24 | Coping |
| 25 | Lintle |
| 26 | Chajja 62.5mm thick |
| 27 | Supplying, fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.. |
| 28 | Fly ash brick work in cement mortar (1:6) using Fly ash brick of approved quality and to the IS specification having crushing strength ranging from 75kg/cm2 to 99/kgcm2 free from cracks, well shaped, uniform in size and produce a clear metallic ringing sound when struck including molding, chamfering, corbelling etc. complete as per drawing, design and specification including racking out joint, watering, curing, scaffolding and cost of materials, labour, conveyance, T&P carriage, royality, taxes etc. all complete as per the specification and direction of Engineer-in-charge. |
| 29 | Foundation & pllith |
| 30 | Super structure |
| 31 | Providing 12mm thick cement plaster in cement mortar of proportion (1:6) over even surface of brick walls, after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 32 | Providing 16mm thick cement plaster in cement mortar of proportion (1:6) with cement wash one coat over uneven surface of brick walls, after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 33 | Providing & Fixing 30cmx30cm/40cmx40cm special plain/ printed series ceramic floor tiles of premium grade having thichness 7mm to 8mm confirming to IS 13755 in floors, treads or steps and landing on 25mm thick bed of cement motor 1:1with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 34 | Supplying, fitting & fixing 20cmx30cm/ 20cmx20cm special plain/ printed series Digital wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to 13753 with 12mm thick cement plaster 1:3with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 35 | Supplying, fitting & fixing UPVC door with frameof approved design & sp[ecification with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 36 | Supplying, fitting & fixing Aluminum Ventilator of approved design & sp[ecification with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 37 | Providing 2coat of plastic emulsion paint over a coat of cement primer & putty inside plastered surface and celling of approved shade & design including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. complete. |
| 38 | Providing 2coat of exterior grade weather coat paint over a coat of cement primer inside plastered surface and celling of approved shade & design including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. complete. |
| 39 | Supplying and filling the Foundation & Plinth with excavated earth laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 40 | Dismantling old tile flooring including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 41 | Dismantling cement cncrete including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 42 | Dismantling Brick masonary in cement mortar including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 43 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trapconforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium platedscrews including jointing the trap with soil pipe incement mortar (1:1) etc all complete as perscrewsspecification. (Seat and cover to be measured and paid for separately) |
| 44 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) confirming to IS :7231 with all fitting to IS:7231 with all complete. Hindware make |
| 45 | Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks andsupply mains for wash basin complete as per specification |
| 46 | Wash basin + cistren |
| 47 | Supplying fitting and Fixing of 15mm dia CP angular stop cock with all complete . |
| 48 | Supplying fitting and Fixing of 15mm dia CP Consil stop cock with all complete . |
| 49 | Supplying fitting and Fixing of 15mm dia CP pillar cock with all complete . |
| 50 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with CastIron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specificationVitreous china wash basin 550x400 mm Of Hindware make. |
| 51 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass checknut complete as per specification |
| 52 | 32mm dia |
| 53 | Fixing Chromium Plated brass waste of the following nominal diameter for wash basin and sinkas per specification |
| 54 | 32mm diameter |
| 55 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.Csheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws andwashers complete as per specification. |
| 56 | 600mm x 450mm bevelled edge mirror |
| 57 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard railscomplete, fixed to woden plugs with Chromium Plated brass screws as per specification Fixing of Glass Shelf. |
| 58 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Platedbrass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as perChromium Plated brass towel rail |
| 59 | Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with ChromiumPlated brass screws, complete as per specification.Chromium Plated brass towel ring |
| 60 | CP soap holder |
| 61 | 1500 litre capacity Double Layer Cylinderical Vertical water storage tanksOn the roof of ground floorDetails of cost for one Tank |
| 62 | Providing and fixing to wall or ceiling and floor rigid UPVC pipes class IV (8 kgf/cm²)/class III(6kgf/cm²) conforming to IS:4985/2000 and pipe fittings of the following nominal bore with clampsincluding making good the wall, ceiling and floor all complete as per specification |
| 63 | Wash basin to soak pit 110mm dia |
| 64 | Providing and fixing to wall or ceiling and floor cpvc pipes class conforming to SDR11and pipe fittings of the following nominal bore with clamps including makinggood the wall, ceiling and floor all complete asper specification complete. |
| 65 | 25mm dia loading main connecting from existing w/s line to overhead tank |
| 66 | 50mm dia loading main |
| 67 | Cutting holes through the brick or laterite masonry wall for taking Sand Cast Iron(SCI) /centrifugally cast (spun) iron pipes and mending good the damages. |
| 68 | 250mm to 375mm thick wall |
| 69 | Cutting grouves in wall celling for taking cpvc pipes |
| 70 | CP Health fucet with 1 m pvc tube |
| 71 | CP Greating |
| 72 | PVC Ballcock 50mm |
| 73 | Tank Nipple of Prayag make |
| 74 | 1\\" Ball valve |
| 75 | 2\\"x2\\"x1/2\\" Reducing Tee |
| 76 | 110mm Door bend 90deg. |
| 77 | 110mm Door bend 45deg. |
| 78 | 110mm vent cowl |
| 79 | Door Tee |
| 80 | Laying in trenches unplasticised PVC pipes conforming to IS:4985-2000 and specials of thefollowing outside diameter for all classes including jointing with supplyof approved solvent cementby non-heat application method including testing as per specification complete.(Earth work intrenches to be measured and paid for separately ) with bed concrete and encasing with complete (1:2:4) 110mm dia rigid UPVC pipe Class-3 (0.60 mpa) |
| 81 | for vent pipe |
| 82 | from toilet to Septic tank |
| 83 | Soak pit (Details enclosed) |
| 84 | Construction of .45x.45x.45 Gully trap chamber with all complete |
| 85 | Construction of .75x.75x.75 Inispection chamber with all complete |
| 86 | Supply fitting fixing of standing urinal etc all complete. |
| 87 | supply fitting fixing of P Trap etc all complete. |
| 88 | supply fitting fixing of Floor Trap etc all complete. |
| 89 | 75 mm dia SWR pipe |
| 90 | Spreader |
| 91 | OHR Tank Base |
| 92 | Partition Wall Please Enable Macros to View BoQ information |
