|
| 1 | Demolition of old brick work built in cement mortar or cement lime mortar complete all as specified and directed. |
| 2 | M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 3 | M&L for brickwork with Sub Class 'B' bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:6, complete all as specified and directed. |
| 4 | Description same all as per item No 3 here-in-before but \\"except brick\\" (brick used obtained from demolition) complete all as specified and directed. |
| 5 | M&L for half brick work with fly ash old size bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints hacking for keys scrubbing down with water etc complete all as specified and directed. |
| 7 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, concrete surfaces with and incuding WPC (liquid form) @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 9 | Supply only integral Water Proofing Compound complete all as specified and directed. |
| 10 | Preparing of newly plastered wall surface of wall and applying two coats of cement base paint over a coat of cement wash primer complete all as specified and directed. |
| 11 | Preparation of old plastered or unplastered surface of wall and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed. |
| 12 | Complete removal existing treatment of wall and preparing of old plastered surfaces and applying two coat of Cement Base Paint white or tinted of approved shade with primer complete all as specified and directed. |
| 13 | Preparing of old plastered surfaces of wall and applying one coat of exterior weather proof paint with 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish as per manufacturer instruction complete all as specified and directed. |
| 14 | Complete removal existing treatment of wall and preparing of old plastered surfaces of wall and applying two coat of exterior weather proof paint with 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with and including one coat of primer and applying 1 to 2 mm thick white cement based wall care putty (Birla/JK White) on the surfaces of uniform thickness making surface absolutely smooth by grinding with sand paper as per manufacturer instruction complete all as specified and directed. |
| 15 | Preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed. |
| 16 | Dismantling RCC Post any section including taking out embedded portion and making good disturbed ground, posts embedded in natural ground complete all as specified and directed. |
| 17 | Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum, getting out, returning, watering and removing surplus soil to a distance not exceeding 50 mtr and making good surface complete all as specified and directed. |
| 18 | Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and directed. |
| 19 | S&F for Mild Steel work conforming to Fe-290 (Gde E-165) in posts and struts in fencing including cutting top to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed. |
| 20 | S&F for Ornamental and intricate design framed work of mild steel conforming to Fe-290 (Gde E-165) as in doors or gates including cutting, bending in required shape & design, welding etc framed & hung including pintle hinges, stops and hand made sliding bolts etc complete all as specified and directed. |
| 21 | Preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces over 10 cm in width or grith not other wise described complete all as specified and directed. |
| 22 | M&L for running welding at site in repairs exceeding 6 mm but not exceeding 9 mm in length, thickness of metal to be welded not exe 6 mm complete all as specified and directed. |
| 23 | M&L for welding at site in repairs exceeding 2.5 cm but not exceeding 5 cm in lengt in length, thickness of metal to be welded not exceeding 6 mm complete all as specified and directed. |
| 24 | M&L for providing in repair precast RCC Jalli & Pillars with Cement Concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate, thickness of RCC Jalli 35 mm (measured solid) including all mouldings & frame, set in cement mortar 1:4 to precast pillars grooves and including reinforcement complete all as specified and directed. |
| 25 | Dismantling fencing wire mess any type any description complete all as specified and directed. |
| 26 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 27 | Supply only chain link mild steel galvanized fencing any type or size complete all as specified and directed. |
| 28 | S&F in repair galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed. |
| 29 | Restraining, resecuring including making good staples etc of old galvanised steel barbed wire fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed. |
| 30 | S&F for hot dip galvanized razor concertina coil fence with punched tape of 600 mm dia, having 50 Nos rounds per 6 mtr length, fixed on upto 3 mtr height of wall with existing angle iron ‘Y’ shaped, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or GI Wire tied to angle iron, with reinforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 Kg / Sqmm with tape (0.52 mm thick) and weight 43.478 Gm / Mtre (cost of MS Angle, C.C Blocks shall be paid separately) complete all as specified and directed. |
| 31 | S&F in repair for 2 mm thick plain coloured translucent sheet with fibre glass reinforced fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 32 | S&F 110 mm bore PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls as in weep holes complete all as specified and directed. |
| 33 | M&L for chiken wire mess fixed on wall or ceiling with nails or screw complete all as specified and directed. |
| 34 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 35 | M&L for providing RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on walls, beams & columns etc as in roof and the like complete all as specified and directed. |
| 36 | Formwork to soffits of suspended slabs such as kitchen shelves, roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping complete all as specified and directed. |
| 37 | M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in manhole covers / drain cover with weep hole / without weep holes etc including necessary form work complete all as specified and directed. |
| 38 | S&F for mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 39 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 40 | M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base, foundation filling and mass concrete complete all as specified and directed. |
| 41 | M&L for 80mm thick factory made vaibratory cement concrete coloured (Red or Yellow or both in combination) interlocking paver block of M-35 grade any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed. |
| 42 | M&L for chequered cement concrete coloured tile (Rubber moulded) 30 cm x 30 cm x 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor complete all as specified and directed. |
| 43 | S&F for heavy duty pavement tiles of size 300mm x 300mm / 400mm x 400mm of 10 mm thick coloured tiles for floor/pavement etc and jointed in neat cement slurry and pointed with white cement fixed with colour pigment to match colour of tiles including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 44 | Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 45 | S&F for exterior finish coloured wall tiles of size 450mm x 300 mm x 6 mm to 7 mm thick as in dados of wall etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in CM 1:4 complete all as specified and directed. |
| 46 | S&F for 15 to 18 mm thick granite stone (of any type) work (table rubbed and polilshed) as in wall lining (veneering to wall) fixed over 10 mm thick backing plaster in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 47 | M&L for preparation of old painted concrete or brick or plastered surface of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint as approved complete all as specified and directed. |
| 48 | Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan & not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed. |
| 49 | Removal of excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and directed. |
| 50 | Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed. |
| 51 | M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in surface channels and drain complete all as specified and directed. |
| 52 | M&L Providing Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 53 | Extra for farming fair finished drain or channel 30 cm inner girth in cement, concrete, using extra cement including forms, moulds, mitered / stopped end etc complete all as specified and directed. |
| 54 | Description same all as per item No 53 here-in-before but add or deduct for each 25 mm girth or part thereof over or under 30 cm etc |
| 55 | S&F for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe. 290. Gde-E-165 complete all as specified and directed. |
| 56 | S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long and 10 mm dia complete all as specified and directed. |
| 57 | Schedule of Credit (MINUS) Rs. 97,115.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum Please Enable Macros to View BoQ information |
