|
| 1 | M & L second class soft wood in scantling clean swan below or above ground level upto four storey bldg, including dismantling timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and as directed. |
| 2 | All as per item No 1 above but except timber including Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work . |
| 3 | Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and as directed. |
| 4 | M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling complete all as specified and as directed. |
| 5 | M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in lining complete all as specified and as directed. |
| 6 | All as per item No 5 above but except plywood |
| 7 | M&L Veneered decorative plywood, 6mm thick grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling complete all as specified and as directed. |
| 8 | M&L Veneered decorative plywood, 6mm thick, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in walls complete all as specified and as directed. |
| 9 | M & L for plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails complete all as specified and as directed. |
| 10 | M&L for preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed.. |
| 11 | M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed. |
| 12 | M&L for preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. |
| 13 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc. 15cm thick. (below or above ground level) complete all as specified and as directed. |
| 14 | M&L for 75mm thick plain cement concrete 1:4;8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as specified and as directed. |
| 15 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in floor complete all as directed by Engr-in-Charge. |
| 16 | M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but n.exc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 17 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 18 | M&L for 20 cm x 20cm size and 25 mm thick Chequered cement concrete tiles (in any colour & shape), set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment over 20 mm screed bed in CM 1:6 complete all as specified & directed. |
| 19 | M&L 50 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate ) as in plinth protection finished even and fair without using extra cement complete all as specified and as directed. |
| 20 | M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM1:4 on fair faces of brick/stonewall surfaces for laying dado/skirting including dismantling of floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises complete all as specified and as directed. |
| 21 | S&F 20mm thick 2nd class softwood boarding, planed one side , with butt joints and fixed with nails in facia eaves boarding including dismantling of boarding of any description fitted in any position with nails complete all as specified and directed. |
| 22 | M&L 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps including dismantling of boarding of any description fitted in any position with nails complete all as specified and directed. |
| 23 | All as per item No.28 above, but except boarding, including dismantling of boarding of any description fitted in any position with nails complete all as specified and directed. |
| 24 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. complete all as specified and as directed. |
| 25 | Taking down chowkat with shutters n. exc.1.5 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 26 | Taking down chowkhat with shutter without taking off shutter from the frame exc 1.5 Sqm and not exc 4 sqm each. |
| 27 | S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid complete all as specified and as directed. |
| 28 | S & F plain framed, panelled shutters 35mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides, or of veneered particle board med density, wood particle board with commercial face or 9mm BWP plywood fitted to chowkat complete all as specified and as directed. |
| 29 | S & F glazed & skeleton shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats. |
| 30 | S & F glazed & skeleton shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats. |
| 31 | S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and as directed. |
| 32 | S&F 75 mm size mild steel butt hinges medium weight complete all as specified and as directed. |
| 33 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 34 | S&F 75 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 35 | S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and as directed. |
| 36 | S&F 100 mm long aluminium handles cast type anodised complete all as specified and as directed. |
| 37 | S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and as directed. |
| 38 | S&F 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 39 | S& F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and as directed. |
| 40 | S & fix in repairs Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 41 | S & F in repair Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 42 | S & F in repair Vitreous China urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling including spreader complete all as specified. |
| 43 | S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white including plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed |
| 44 | S&F in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified and as directed. |
| 45 | S&F in repairs vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed |
| 46 | S&F in repairs PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr cap white with flush pipe & all fitting complete all as specified and as directed. |
| 47 | S&F in repair Stop/Angle valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and as directed. |
| 48 | S&F in repair Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, complete all as specified and as directed. |
| 49 | S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed. |
| 50 | S&F in repairs 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 51 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws. |
| 52 | S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 53 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 54 | S&F in repairs towel ring of brass chromium plated complete all as specified and as directed. |
| 55 | S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part -I, including dismantling of old unserviceable tank complete all as specified and as directed. |
| 56 | S&F in repair ball valves, high pressure, with polythene float and fly nut complete, 20mm bore complete all as specified and as directed. |
| 57 | S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and as directed. |
| 58 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 59 | S&F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) suitable for floor taps, all as specified and directed. |
| 60 | S&F in repairs health faucet (hand shower) chromium plated complete all as specified and as directed. |
| 61 | S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. including taking up or down 15mm dia GI steel tubing and connections complete all as specified and as directed. |
| 62 | S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc including Taking up or down 20mm dia GI steel tubing and connections complete all as specified and as directed. |
| 63 | M&L for lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified. |
| 64 | M&L for M&L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and as directed. |
| 65 | S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls including Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed. |
| 66 | S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches including Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed. |
| 67 | S & F PVC (SWR) bend suitable for 110mm dia pipe complete all as specified and as directed |
| 68 | S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and as directed. |
| 69 | S&F PVC (SWR) reducers any radius 110mm bore |
| 70 | S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access |
| 71 | PVC (SWR) vent cowl 75mm dia complete all as specified and as directed. |
| 72 | M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 73 | S&F Pre-painted galvalume aluminium Zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw including necessary scaffolding, upto four storey building complete all as specified and directed by Engr-in-Charge. (Note : Cost of scaffolding work for fixing of roof sheet to be included in the unit rate quoted by tenderer) including dismantling plain or corrugated steel sheeting, any gauge ,thickness including Nainital or similar pattern roof covering including necessary scaffolding, any type, any location/height complete all as specified and as directed. |
| 74 | S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, upto four storey building complete all as specified and directed by Engr-in-Charge. (Note: Cost of scaffolding work for fixing of roof sheet to be included in the unit rate quoted by tenderer) including dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering including necessary scaffolding, any type, any location/height complete all as specified and as directed. |
| 75 | M&L 2nd class softwood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall/ceiling panelling 15mm including cornice and beading as required and applying two coats of polishing over one coat of sealer after preparation of the surface, complete all as specified and as directed. Note : Framework shall be measured and paid separately. |
| 76 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 including Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 77 | M&L for random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4including Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles Complete all as specified and as directed. |
| 78 | All as per item No 77 above but except stone including Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles Complete all as specified and as directed. |
| 79 | M&L for cement concrete of type C-1, 1:3:6 (20mm graded aggregate) in coping, lintel bands, strings courses etc slightly rounded and chamfered angles and throating etc and setting in mortar complete with joints to match complete all as specified and as directed. |
| 80 | Excavation in trenches in soft/loose soil n. exc 1.5 mtr wide and n. exc. 1.5 mtr in depth for foundation / pipes / cables and getting out complete as specified and directed by Engr-in-Charge. |
| 81 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm. |
| 82 | Removing excavated surplus soil / material to a distance n. exc. 50 mtr away and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and as directed. |
| 83 | Ref fixing /relaying old steel tubing and connection in new or old position including fittings as required (in trenches, walls, ceiling, Floors etc) for 80 mm bore pipe complete all as specified and as directed. |
| 84 | All as per item No 83 above but 50 mm bore pipe. |
| 85 | All as per item No 83 above but 40 mm bore pipe. |
| 86 | All as per item No 83 above but 25 mm bore pipe. |
| 87 | All as per item No 83 above but 20 mm bore pipe. |
| 88 | Supply and laying in trenches GI tubing \\"medium\\" grade in new or old direction including necessary screwing and all fittings (Tee, union, nipple, reducer, elbow etc) as required at site with taking down old one for the sizes of pie 80 mm bore complete all as specified and as directed. |
| 89 | All as per item No 88 above but 50 mm bore pipe. |
| 90 | All as per item No 88 above but 40 mm bore pipe. |
| 91 | All as per item No 88 above but 25 mm bore pipe. |
| 92 | All as per item No 88 above but 20 mm bore pipe. |
| 93 | Supply fix in replacement Gun metal gate valve with iron wheel head, both end screwed for iron pipes of the sizes 40 mm bore pipe complete all as specified and as directed. |
| 94 | All as per item No 93 above but 40 mm bore pipe. |
| 95 | All as per item No 88 above but 25 mm bore pipe. |
| 96 | All as per item No 88 above but 20 mm bore pipe. |
| 97 | S&F testing and commissioning Cast iron sluice valve of class PN 1.0 ISI marked confirming to IS 14846 both ends flanged with iron wheel head and stainless steel spindle non rising type including necessary jointing material like nuts bolts and washers, rubber gasket complete with taking down old one all as specified and directed of the sizes 80 mm bore complete all as specified and as directed. |
| 98 | All as per item No 97 above but 50 mm bore pipe. |
| 99 | Supply and Laying in trenches High density poly[1]ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches including necessary screwing and all fittings (Tee, union, nipple, reducer, elbow etc) as required at site complete all as specified and as directed. |
| 100 | Supply and fixing of 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene with complete accessories (Tee,union, nipple, reducer, elbow etc as required at site) random fittings laid in trenches with taking down old one complete all as specified and directed by for the following size 63 mm bore pipe complete all as specified and as directed. |
| 101 | All as per item No 100 above but 50 mm bore pipe. |
| 102 | All as per item No 100 above but 40 mm bore pipe. |
| 103 | All as per item No 100 above but 25 mm bore pipe. |
| 104 | Making connection of PP-R distribution branch with PP-R main of 16-40mm by providing and fixing tee including cutting and making fusion joint etc. |
| 105 | Making connection of PP-R distribution branch with PP-R main of 40-75mm by providing and fixing tee including cutting and making fusion joint etc. |
| 106 | Supply and fix of PP-R Gate valves (brass insert) of size 63 mm bore pipe. |
| 107 | All as per item No 106 above but 50 mm bore pipe. |
| 108 | All as per item No 106 above but 40 mm bore pipe. |
| 109 | All as per item No 106 above but 25 mm bore pipe. |
| 110 | S&F in replacement 20 HP Star delta fully automatic star-Delta starter (ASD) complete all as specified and as directed. |
| 111 | S&F in replacement starter for submersible pump 5 HP. Make Havells |
| 112 | S&F in replacement starter for submersible pump 10 HP. Make Havells |
| 113 | S&F CI reflex valve (NRV) with by pass arrangement suitable for 50 mm dia size flanged joints complete Make : Kirloskar with nut bolt & washer confirming to IS-5312 PN 1.6 complete all as specified and as directed. |
| 114 | All as per item No 113 above but of size 80mm dia bore. |
| 115 | Supply only foot valve and Supply and fixing new CI foot valve flange ends including nut bolt and washer confirming to IS 4038 of size 80 mm dia complete all as specified and as directed. |
| 116 | All as per item No 115 above but 50 mm dia bore |
| 117 | Supply and fixing of Monoblock pump set including starter of suitable for 230 V, single phase system having capacity 2 HP complete all as specified and as directed. |
| 118 | Supply and fixing of Monoblock pump set including starter of suitable for 230 V, single phase system having capacity 5 HP complete all as specified and as directed. |
| 119 | M&L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and as directed. |
| 120 | M&L for lagging to pipes 25mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and as directed. |
| 121 | Dewatering and taking out sludge from tank of size and capacity (above 10000 Ltr), removing the same to a distance not exceeding 50m with & including, cleaning the sump by wire brushing including brooming down complete including white washing internally complete all as specified and as directed. |
| 122 | S&F for rotational moulded polyethylene water storage tank of capacity of 5000 litres (cuboidal or cylindrical) vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position Complete all as specified in SSR Part I. |
| 123 | Supplying, Hoisting and Fixing of Rotational moulded polyethylene water storage tank of capacity of 1000 litres (cuboidal or cylindrical as approved by Engineer-In-Charge) vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position Complete all as specified in SSR Part I. |
| 124 | Supply only Calcium hypochlorite granules (65% to 70%) disinfectant for water treatment, more stable than Chlorine Gas and Stronger than bleaching powder and solidum Hypochlorite) Packing in 45 Kgs in plastic drums complete all as specified and directed. |
| 125 | Material and labour for rewinding of submersible motor upto 10 HP by taking out the burnt out winding from the starter with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed. |
| 126 | Material and labour for repair of centrifugal motor pump set 20/ 30 HP (Rewinding job will be measured separately), including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6307-02 Nos, replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as specified and as directed. |
| 127 | Material and labour for rewinding of 20/30HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed. |
| 128 | M&L for Valve pit of size 9cmx90cmx90cm(internal dimensions) brick masonry construction, including all necessary excavation and earth work in any type of soil, returning filling in disposal of surplus soil to a distance not exceeding 50m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), PCC coping in PCC (1:2:4) Type B-0 using 12.5mm crushed stone graded aggregate, brick masonry in cement (1:4) internally, finished even and fair and pointing flush externally as the work proceeds in the same mortar, mild steel angle iron 50x50x6mm frame, MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS Work with two coats of synthetic enamel paint of the tint as approved by the GE over a coat of red oxide primer and painting all the MS embedded in PCC including two coats of black bituminous paint, complete all as specified and directed Please Enable Macros to View BoQ information |
