|
| 1 | Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified. |
| 2 | Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified. |
| 3 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified. |
| 4 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified. |
| 5 | M&L for Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified. |
| 6 | M&L for Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified. |
| 7 | M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 8 | M&L MS 150 mm ordinary rat tail rod pattern spring including roller and roller plate complete with welding etc and making good the disturbed portion complete all as specified. |
| 9 | M&L in repair MS 150 mm ordinary rat tail rod pattern spring including roller and roller plate complete with welding etc and making good the disturbed portion complete all as specified. |
| 10 | S&F Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified. |
| 11 | S&F 25mm thick flush shutter solid core construction, with particle board core and plywood face panels commercial type on both side complete all as specified. |
| 12 | S&F 30mm thick flush shutter solid core construction, with particle board core and plywood face panels commercial type on both side complete all as specified. |
| 13 | M &L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying 02 coats of synthetic enemel paint over incl one coat of primer complete all as specified. |
| 14 | S&F 35mm thick 2nd class hard wood Plain framed shutter (One/two panel) with lock rail and panel of 9mm BWP ccommerial ply or 12mm veneered particle board with ommercial veneering on both faces. The size of rail and stiles as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified. |
| 15 | S&F 35mm thick 2nd class hard wood Glazed and Skelton Shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 16 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified. |
| 17 | S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified. |
| 18 | M&L in repairs for Sheet Glass, 3.00mm thick glazing with Beads or Oil Putty, not exc. 0.5 Sqm in Each Pane, complete all as specified and as directed. |
| 19 | Ditto all as per item No 19 above but Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed. |
| 20 | S&F in repair 100mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and as directed. |
| 21 | S&F 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed. |
| 22 | S&F in repair 150mm long Cast iron or malleable cast iron Handles, cast type, stove enamelled lack, complete all as specified and as directed. |
| 23 | S&F 150mm long Extruded aluminium alloy Handles, fabricated type, anodisedcomplete all as specified and as directed. |
| 24 | S&F in repair 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed. |
| 25 | S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed. |
| 26 | S&F in repair 200mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 27 | S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 28 | S&F 100mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and as directed. |
| 29 | S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified. |
| 30 | S&F in repair galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staple complete all as specified. |
| 31 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 32 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed. |
| 33 | M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and as directed. |
| 34 | M&L for Non-skid Coloured Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed. |
| 35 | M&L for Non-skid Coloured Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in skirting/dado set & jointed in neat cement slurry & pointed in white or coloured cement to match the surface including of 10 mm thick in CM 1:3, complete all as specified and as directed. |
| 36 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed 15mm thk in CM 1:6 complete. |
| 37 | M&L for Vitrified coloured tiles light shade 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl. 10mm thicl plaster in CM 1:3 complete all as specified and directed. |
| 38 | M&L for coloured Chequered cement concrete tiles of size 20cm x 20cm x 25 mm/30mmx30mmx25mm thick (with grey cement and colour pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed. |
| 39 | M & L for Glazed coloured ceramic tiles in vertical surface 450x300x7 mm/350x 250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thk screed bed in CM 1:3, complete all as specified and as directed. |
| 40 | Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc,area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed. |
| 41 | M&L Granite slab 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 42 | M&L machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as spd. |
| 43 | M&L machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as spd. |
| 44 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and othersimilar situations complete all as specified and as directed. |
| 45 | Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed. |
| 46 | M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in Plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified. |
| 47 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified. |
| 48 | M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1:6 complete all as specified and as directed. |
| 49 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed.(Note: Height of the work upto 15.00 m) |
| 50 | M&L for rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed. |
| 51 | M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed.(Note: Height of the work upto 15.00 m) |
| 52 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed. |
| 53 | M&L for preparation of newly plastered wall surfaces and applying 3mm thick wall care putty on wall complete, all as specified and as directed. |
| 54 | M&L for two coats of distemper oil emulsion on new plastered wall surfaces complete all as specified and as directed. |
| 55 | M & L for finishing walls with Acrylic Smooth exterior paint of required shade new work (Two ormore coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per the existing pattern complete all as specified and as directed. |
| 56 | M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and as directed. |
| 57 | Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified . |
| 58 | S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 59 | S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed. |
| 60 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etccomplete. |
| 61 | S&F in repair seat and cover for pedestal pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge devic, complete all as specified and as directed. |
| 62 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 63 | S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified. |
| 64 | M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. |
| 65 | S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and as directed. |
| 66 | S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed. |
| 67 | S&F in repair, Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and as directed. |
| 68 | S&F Pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule and fixed in repair complet all as specified and as directed. |
| 69 | S&F in repair CP 15mm bore wall mixer for mixing hot & cold water screwed down for iron pipe and fixed with connecting legs, wall flanges & wall brackets complete all as specified and as directed. |
| 70 | S&F in repair Looking mirror 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 71 | S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 72 | S&F in repair CP Soap Dish fixed in wall complete all as specified and as directed. |
| 73 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed. |
| 74 | S&F in repair CP Grating doom 100mm dia complete all as specified and directed. |
| 75 | M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and as directed. |
| 76 | Supply only Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm bore of pipe 32mm complete all as specified and as directed. |
| 77 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 78 | S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed. |
| 79 | S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed. |
| 80 | S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 81 | S&F PVC (SWR) bends 75mm bore complete all as specified and as directed. |
| 82 | S&F PVC (SWR) bends 110mm bore complete all as specified and as directed. |
| 83 | S&F in repairs, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified. |
| 84 | S&F in repairs for Waste coupling of PTMT (half or full threaded). (Minimum weight 32mm-45gms/40mm-60 gms |
| 85 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including 450mm long SS arm fixing to water connection, complete all as specified. Make: Cera. |
| 86 | Demolition of cement concrete (unreinforced) of any description in sunkun portion or any position not otherwise specifically provided for all as specified and as directed. |
| 87 | providing cement concrete 1:4:8 type D2 using 40 mm gradded aggregate as in foundation and mass concreting for all as specified and as directed. |
| 88 | M&L for rendering 15mm thick CM 1:3 on wall surfaces finishing surfaces even & smooth w/o using extra cement complete all as specified and as directed. |
| 89 | Applying evenly a coat of 85/25 grade hot bitumen at the rate of 1.50Kg per square metre complete all as specified and as directed. |
| 90 | Polythene film, 150 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 Kg per sqm complete all as specified and as directed. |
| 91 | M&L for 4.80mm thick Sheet Glass ordinary quality and glazing with oil putty not exc. 0.5 Sqm in Each Pane, complete all as specified and as directed. |
| 92 | Dismantling boarding any description fixed in any position with nails / screws complete all as specified and as directed by Engr-in-Charge. |
| 93 | &F in repair 18mm thick plywood, grade BWR, type BB, fixed with screw to timber frame work, including 1mm thick PVC moulding all around including edging, complete all as specified and as directed by Engr-in-charge. |
| 94 | M&L for .90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 95 | S&F in repair continuous (piano) hinge, mild steel, bright finish or electrogalvanised 30mm wide fixed with screw complete all as specified and as directed. |
| 96 | S&F in repair 100mm brass handles, cast type, polished bright complete all as specified and as directed by Engr-in-charge. |
| 97 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 98 | S&F rolled mild steel Fe 410 -W (Gde E- 250) quality- A in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 99 | M&L for Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10Sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and as directed:- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window . (b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf . (c) MS Tower bolt 150mm long - 02No per leaf . (d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf .(e) Cleat 55mm Long of Hollow Square 15mm x 20mm x 63mm welded to Hinge 01 No per Leaf .(f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 02mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete and incl taking down the existing old windows. |
| 100 | S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer incl taking down old, complete all specified. Note :- (i) The ventilator shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3. (ii) Glazing, wire gauge shall be measured and paid separately. |
| 101 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and making good surface after fixing of window. Net opening will be measured for payment purpose)(A) Area not exceeding 2.00 sqm each |
| 102 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and making good surface after fixing of window. Net Opening will be measured lor payment purpose.)(A) Area exceeding 2.00 sqm each |
| 103 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and making good surface after fixing of window. Net Opening will be measured lor payment purpose.)(A) Area not exceeding 2.00 sqm each |
| 104 | S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650Kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws and making surface good after fixing of frame all as per direction of Engineer-in-Charge. (Note: Stainless steel butt hinges and necessary SS screws shall be paid Separately) |
| 105 | S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhat of size 50 x 100 mm/65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibres ( wood powder/ rice husl/ wheat husk) and non toxic additives (maximum toxicity index of 12 of 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, moduled of elasticity 900N/mm2 and resistance to spread of flame of flame of class A category with property of being termite/borer Proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 106 | M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 107 | S&F of aluminium deco grill outside UPVC window, complete in all respect, including frame, grill members, fixing accessories, labour and all incidental works complete all as specified and as directed. |
| 108 | S&F in repairs, for plate rack made of stainless steel 0.63 mm thick of size 600 X 750 mm fixed to wall with and incuding angle iron brackets of suitable size grouted in cement concrete, complete all as specified. Please Enable Macros to View BoQ information |
