|
| 1 | M&L for cleaning the entire area first by broom, chipping unwanted area using chisel and hammer, cleaning / smoothening by wire brush, washing the entire surface using water jet and finally by broom and air jet and applying one layer of cement and Nushar Make CCP mix in the ratio Cement : CCP : Water :: 1:1:0.2 and mixing thoroughly using electric mixer coating to be done atleast 1' longitudinally to secure edges and Filling all visible cracks using Nushar crack pack master/ Nushar make Cladofix. Laying 66 gm non woven fiber along with 2nd and 3rd coat of CCP mix and cement mixture as in step 2. Filling overlapping joints using Nushar make Master adhesive. Apply 1st coat of Nushar make Polymembrane coat using brush across the area. After curing of above layer apply second coat of Polymembrane coat. Apply 1st coat of Nushar make Nano top coat.Ponding test to be done by filling atleast ½\\" water in the entire area. Removing the water after the test is successfully completed. Apply 2nd layer of Nushar make Nano top coat to finish the work. |
| 2 | Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 3 | Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and as directed. |
| 4 | M&L 25mm thick PCC 1:2:4 type B-0 with 12.5mm graded stone aggregate as in padding over roof slab for making slope on roof top surface finished even and smooth complete all as specified and directed. |
| 5 | M&L for 10mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately) |
| 6 | Supply only of liquid water proofing compound complete all as specified and directed. |
| 7 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed. |
| 8 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00Sqm each(without taking off shutters from the frame) and all as directed. |
| 9 | Taking down shutters of any description exc 1sqm and n.exc 2 sqm each and removing to store complete all as specified and directed. |
| 10 | M&L for providing cement concrete type 1:3:6 type C-1(20mm graded5 agg ) as in roof kerbs or mud stops, filling of hold fasts and door frames, rounded or chamfered on edges complete all as specified. |
| 11 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 12 | S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 13 | S&F Factory made Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type door/window/ ceosetory windows & other frames / chowkat of size 65x125mm compressing of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boady threaded star headed SS screws having minimum density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast /Lugs/SS dash fastebers if required dia and length complete all as per direction of Engineer-in-Charge (MS holdfast /lugs or SS dash fasteners shall be paid separately) Note:- for WPC solid door/window frames. minus 5mm tolerance in dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 14 | S&F Factory made Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type door/window/ ceosetory windows & other frames / chowkat of size 47x70mm compressing of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boady threaded star headed SS screws having minimum density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast /Lugs/SS dash fastebers if required dia and length complete all as per direction of Engineer-in-Charge (MS holdfast /lugs or SS dash fasteners shall be paid separately)Note:- for WPC solid door/window frames. minus 5mm tolerance in dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 16 | S&F 30mm thick, WPC, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed. |
| 17 | S&F SS butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and directed. |
| 18 | S&F SS butt hinges, 75mm size medium weight, cold rolled mild steel complete all as specified and directed. |
| 19 | S&F aluminium anodised barrel tower bolt 150mm long extruded section all as specified. |
| 20 | S&F aluminium anodised aluminum handle 150mm long extruded section all as specified. |
| 21 | S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete. |
| 22 | S& F 2nd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 23 | M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 24 | S&F for Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track & sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 25 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. |
| 26 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. |
| 27 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 28 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed. |
| 29 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 30 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and directed. |
| 31 | Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water , |
| 32 | M&L for Rendering 5mm thick with water proofing compound in cement mortar 1:3 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement in ceiling/ Chajjas complete all as specified. |
| 33 | M&L for complete removal and preparation old unplastered surfaces of any description and applying one coat of white wash on ceiling surfaces complete all as specified and directed |
| 34 | M&L for preparation new plastered surfaces of any description and applying three coat of white wash on ceiling surfaces complete all as specified and directed |
| 35 | M&L for rendering 15mm thick in cement mortor 1:4 on brick/ concrete surfaces with water proofing compound and finishing the surface even and smmoth without using extra cement complete all as specified directed. |
| 36 | M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of cement primer on external surfaces of walls complete all as specified and directed. |
| 37 | M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of cement primer all as specified & directed. |
| 38 | M&L for rendering 10mm thick in CM 1:6 brick work or concrete in inernal surfaces of wall finished even and fair without using extra cement complete all as specified and directed. |
| 39 | M&L for preparing New plasteres surfaces Wall and applying of Birla/JK white wall care putty approx 2mm thick on Wall as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer paint on Wall complete all as specified and directed. |
| 40 | Complete removal of existing treatment of walls and applying two coats of oil bound distemper over and including a coat of wall care putty 1.5mm thick & a coat of alkali resistance primer complete all as specified and directed. |
| 41 | Complete removal of existing treatment of walls and applying two coats of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/10 sqm) and inlcundi 3mm wall care putty complete all as specified and directed directed. |
| 42 | Removing the plant/growth of any description size, any location of external surfaces of walls shafts by cutting & remvoing the roots completely spraying the suitable chemical (each plant 100 ML) in the removed portion to avoid re-growth & making good damaged portion to match the existing surfaces by PCC type B0 (1:2:4) 12.5mm graded aggregate complete all as directed by Engr In Charge. (Chemicals : Gramzone/Roundup or equivalent suitable to remove/destroy the plants/roots) |
| 43 | Dismantling of floor tiles, mozzac floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. |
| 44 | M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed |
| 45 | M&L glazed ceramic coloured tiles size 450X 300X 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick backing coat in CM (1:4) mixed iwth complete all as specified and directed. |
| 46 | Dismantling of Stone slabs laided in any mortar complete all as specified and directed. |
| 47 | M&L for Granite (of any type) tiles 18 to 19mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including screed bed 20mm thick in cemen tmortar 1:6 completecomplete all as specified and directed. |
| 48 | M&L for Mirror polished Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurrymixed with pigment to match the shade of the slab including rubbingand polishing complete all as specified and directed. |
| 49 | Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick and clearing rubbish from site all as directed and specified. |
| 50 | M&L for 40mm thick Cement concrete 1:2:4 type B-1 as in floor including surfaces to be finished even and smooth with using extra cement complete all as specified and directed |
| 51 | M&L 75mm thick Cement concrete 1:3:6 (40mm graded aggregate) in flooring or plinth protection including surfaces to be finished even and smooth without using extra cement complete all as specified and directed. |
| 52 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 53 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed. |
| 54 | S&F medium grade galvanised 15mm Bore steel tubing with fittings and fixed to wall / ceiling taking down old tubing and connection, and removing to store complete all as specified and directed |
| 55 | S&F med ium grade galvanised 20mm Bore steel tubing with fittings and fixed to wall / ceiling taking down old tubing and connection, and removing to store complete all as specified and directed |
| 56 | S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted of and fixed in position including, dismantling existing water tanks etc all as specified and directed. |
| 57 | S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 58 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 59 | S&F in repairs 15mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 60 | S&F in Repairs extended nose Bib tap Cast copper alloy with butterfly handle with, screwed down scewed for iron pipe or for brass furrel and fixed |
| 61 | S&F in Repairs CP angular stop cock 15mm bore |
| 62 | S&F in Repairs CP Angular stop cock two way 15mm bore |
| 63 | S&F in Repairs Pillar tap Swan neck with swinging support |
| 64 | S&F in repair 20mm dia brass CP towel rail 600mm long all as specified and directed |
| 65 | S&F in repair CP toilet paper holder with flat recessed type stainless steel |
| 66 | S&F in repairs 15mm bore PVC connection pipe of 450mm size with 2 Nos brass check nuts with washers |
| 67 | S&F in repair vitreous china wash hand basin white flat back of size 550mm x 400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings, and pedestal etc complete all as directed and spcified. |
| 68 | S&F in repairs 600mm x 450mmm x 5.0mm thick looking mirror bevelled edge of selected quality glass with aluminium frame of channel alround mounted on AC building board or commercial ply wood and fixed to wooden plug with CP brass screws, complete all as specified and directed. |
| 69 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 70 | Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed. |
| 71 | S&F in repairs Water closet (Squatt pattern) complete including provision of lime/Cement bedding concrete bedding including complete all as specified and directed. |
| 72 | Supply only PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified. |
| 73 | S&F in repair 15mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed. (Make: Somany Cat No. 272150680301 equivelant of make as per List of manufacturer's) |
| 74 | S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors including ttaking down old ac drain pipes laid in any position complete all as specified. |
| 75 | S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified. |
| 76 | S&F for Anodised aluminium with powder coating of any colour thickness of coating not less than 50 microns frame for doors, windows, ventilators & partition with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 77 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 78 | S&F 12mm Thick Toughen glass partitions, Doors, including all fittings and fixtures, necessary Handles, hinges, and knobs etc as per the existing one complete all as specified and directed. |
| 79 | S&F in repairs Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods complete all as specified and directed. |
| 80 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 81 | M&L for Modular kitchen & Wardrobe / cupboard with 18mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board levies of action Tesa and equivalent including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic type) etc or sliding with track arrangement as directed including necessary accessories like stainless steel handle, Magnetic catch etc and steel baskets of required size mounted on suitable channels with ball bearing to moving of baskets smoothly including all necessary fittings and fixture and 8mm thick both sides Prelaminated BSB (Both side balancing proper ) HDHMR of Action Tesa and equivalent as per IS:14587:1998 fixed including dismantling of existing complete all as specified. Note:- Kitchen accessories ie baskets, cutlery baskets will be measured and paid separately as supply only. . |
| 82 | S&F for Stainless Steel Hinges 50mm long fixing to timber frame work including necessary cutting and Stainless steel screws complete all as specified and directed. |
| 83 | S&F in repair soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed. |
| 84 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 85 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as Specified. |
| 86 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 87 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 88 | Taking down old unserviceable point wiring from existing conduit (light fan, socket or powder) complete such as switches, ceiling rose, pendent regulated and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete |
| 89 | Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and factory made modular flush sheet galvanised metal sunken box having sheet thickness not less than 1.2mm with zinc coating not less than 120 GSM with top, bottom , side and back wall knockouts for conduit entry from any direction, modular white cover plate with frame, blanking plate etc suitable for up to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :- |
| 90 | One light point controlled by one, one way switch |
| 91 | One ceiling/ exhaust fan point controlled by one, one way switch |
| 92 | One bell point controlled by one, one bell push |
| 93 | One socket outet point 5 amps on the independent board |
| 94 | One socket outet point 5 amps on the same board |
| 95 | All as per the description of srl item No 89 here-in-before but wiring with 2.5 sqmm (nominal area) for one 15 Amp including FRLS PVC insulated 2.5 sqmm copper earth wire, connected to common earth dolly with thimble etc complete all as specified |
| 96 | S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete. Make - Legrand Cat Part No 573400/Schnider Cat Part No x1001WH/Wipro Cat Part No RF110 |
| 97 | S&F modular bell push with indicator, 06 Amps, single pole, one way, 230 volts complete. Make – Legrand Cat Part No 573413/Schnider Cat Part No x1005WH/Wipro Cat Part No RF311 |
| 98 | S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete. Make - Legrand Cat Part No 573424/Schnider Cat part No X2005WHNS/Wipro Cat Part No R1212 |
| 99 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete. Make - Legrand Cat Part No 573410/Schnider Cat Part No x1101WH/Wipro Cat Part No RF1310 |
| 100 | S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete. Make – Legrand Cat Part No 573471/Schnider Cat Part No x2106WH/Wipro Cat Part No R1332P |
| 101 | S&F ceiling rose surface type bakelite 65x50mm three terminal complete |
| 102 | S&F in reapir lamp holder, isolated body, with back plate suitable for batten/angle fittings including 9 Watt LED bulb complete (Make-Philips/Havells/Wipro/Crompton) |
| 103 | S&F bell, ding dong type, AC, 230 V, single pole |
| 104 | S&F modular ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, socket type, 100 watts, ISI marked complete |
| 105 | S&F sueface mounting LED integrated aluminium housing batten luminaire not less than 10 watt 2 feet fixture should have minimum luminous efficacy of LED and complete system 120 lm/watt and 90 lm/watt respectively, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, HD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete. |
| 106 | S&F decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb having minimum luminous efficacy of LED and complete system 120 lm/watt and 90 lm/watt respectively, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@ operating voltage 170V-240V for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete |
| 107 | S&F surface mounting LED integrated aluminium housing batten luminaire not less than 20 W, 4 feet fixture should have minimum efficiency at level >=120 lumens/watt and 100 lm/watt respectively, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete. Make: Eveready: LEDBTA02016-02/Havells: LUMILINEPLUSPROBS 20WLED865SPCSSIND/Philips: BN170CLED20S6500PSUL120 |
| 108 | S&F in replacement of 15 Watt round LED panel recess/surface mounting downlight in CDL with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mmmm dia hight max 35mm recess luuminaries all as specified and directed. Make : Philips / Eveready/ Havells |
| 109 | Supply and fixing in replacement of ultra bright compact 8 Watt round LED downlighter recess/surface with high efficiency LED,s idealy suited for low ceiling areas to give glare light IP-54 in 6500K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 95mm mm dia hight max 83mm recess luuminaries all as specified and directed. Make: Eveready: LEDDNR00616-01/ Havells: ZIVAFLRDDLR6WLED857S/ Philips: DN495LED6S6500PSUWH |
| 110 | Supply and fixing in replacement of LED luminaire 600mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete. Make: Eveready: Cat Part No LEDPLB03616-03NS/ Havells: Cat Part No VENUSTREND2x2PLR36WLED865SWH/ Philips: Car Part No RC380BLED36S-6500G6L60W60PSU0DS1 |
| 111 | Supply and fixing in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5mm flat iron clamps, nuts, bolts & washers complete Make :Eveready: LEDSL03615-01PC/ Havells: ENDURASUNDOWNSL35WLED765PASYBOPC/ Philips: BRP331LED36CWR5NPCPSUS1V1 |
| 112 | S&F(in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete |
| 113 | All as per the description of srl item No 107 here-in-before but 12 Way |
| 114 | S&F (in replacement) MCB SP, AC, 240 volts of 10 to 40 Amps capacity \\"C\\" curve, 10 KA incl connections using copper lugs complete |
| 115 | S&F MCB SPN, AC, 240 volts of 40 Amps capacity and making connections by using suitable copper lugs complete |
| 116 | S&F (in replacement) sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete Note:- MCCB & MCB SP will be measured seperately |
| 117 | S&F in replacement of MCCB 125 Amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete |
| 118 | Supply, installation and connecting to electrical system, LT distribution switch board panel cubical type for out door use, double door, with rigid hinges, door handles locking arrangement back side openable, compartmentalized design, mounted on suitable PCC blocks, fabricated out of CRCA sheet 3.15mm thick, suitably spaced, totally enclosed in chamber for reception of 3 phase, 440 V, 50 HZ, AC supply including all connection with aluminum strips, internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire with lugs. Panel shall be effectively PVC gasketed and sealed, glands to be provided at cable entries, powder coated painting and sign writing for in/out going connections all as specified & directed and comprising of following as under.Incoming:-(a) 4-Pole bus bar of high conductvity AL alloy 3 Nos of Phase (R,Y,B) Rating 500 Amp Rating and mounted on DMC support with heat shrink sleeve-1 set.(b)Digital type multifunctional meter (Amps,Volt,Hz,KWH)-1Nos(c) LED type Phase indicator R,Y,B -1 Set(d) MCCB 4 pole 400 Amp,415 volts,36 KA -1 NosOutgoings:-(a) MCCB 4 Pole 160 Amp ,415 volt, 25 KA -03 nos (b) MCCB 4 Pole 125 Amp ,415 volt, 25 KA -01 nos |
| 119 | S&F in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete |
| 120 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 32 x 6mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm MS bars at 150mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete |
| 121 | Supply and fixing in replacement of wall mounted fan of 400mm sweep, 230 volts, AC, 50 Hz capacity, including all arrangements for mounting of fan including connecting up with provision of PVC insulated flexible twisted type copper conductor cable 1.5 Sqmm, 2 core as required for connections complete all as specified and as directed. |
| 122 | Material and labour in replacement for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring. Note:- Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose. |
| 123 | All as per the description of srl item No 125 here-in-before but 06 Sqmm nominal cross sectional area, with and including continuous earth wire of size 06 Sqmm nominal cross sectional area. Note:- Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose. |
| 124 | All as per the description of srl item No 126 above but PVC conduit 30mm dia and 10 Sqmm nominal cross sectional area, four single core, with and including continuous earth wire of size 10 Sqmm nominal cross sectional area. Note:- Three run for phase, one run for neutral and one run for continuous earth wire shall be measured as one run for payment purpose. |
| 125 | Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete . and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed. Make - Havells Model No Efficiencia Neo (BLDC 26W), Orient Model AEON, Crompton Energion HS |
| 126 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed |
| 127 | Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 4 core Note :- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid seperately. |
| 128 | Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out in loose/soft soil for laying of cable complete all as specified & directed |
| 129 | Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified and directed |
| 130 | Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed |
| 131 | Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed |
| 132 | Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. |
| 133 | M&L for boring/ making hole under road by drilling machine or hand drill without damaging of road for laying U/G cable for size 40mm bore of GI pipe complete all as specified & directed |
| 134 | Supply and fix electric water heater, storage type 25 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed Note:- Old unserviceable geysers to be deposited in MES store. Please Enable Macros to View BoQ information |
