|
| 1 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in soft/loose soil for foundation, etc, or for shafts, wells, drain pipes n.exc 10sqm on plan and getting out, complete, all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete, all as specified and directed. |
| 3 | Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50m above the starting point, complete, all as specified and directed. |
| 4 | Supply and laying in repair 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 90 mm, including fittings including taking up/ down old unserviceable GI/ PPR pipe |
| 5 | Supply and laying in repair 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 63 mm, including fittings including taking up/ down old unserviceable GI/ PPR pipe |
| 6 | Supply and laying in repair 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 32 mm, including fittings including taking up/ down old unserviceable GI/ PPR pipe |
| 7 | Supply and laying in repair 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 25 mm, including fittings including taking up/ down old unserviceable GI/ PPR pipe |
| 8 | Supply and laying in repair 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete of size outer dia 20 mm, including fittings |
| 9 | M&L in repair for taking down old unsv gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe for sizes 20mm to 63 mm complete all as specified and directed |
| 10 | Supply and fix PPR Gate Valves (Brass Insert) of outer dia 63 mm |
| 11 | Supply and fix PPR Gate Valves (Brass Insert) of outer dia 32 mm |
| 12 | Supply and fix PPR Gate Valves (Brass Insert) of outer dia 25 mm |
| 13 | Supply and fix PPR Gate Valves (Brass Insert) of outer dia 20 mm |
| 14 | M&L for Ball valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or ferrule and fix of size 20 mm |
| 15 | M&L for Ball valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or ferrule and fix of size 25 mm |
| 16 | M&L for taking down old unsv cast iron sluice valve of size 80mm,100mm & 150mm dia with flanged ends class PN 1.6 with iron wheel, stainlwss steel spindle and check nut complete all as specified and directed |
| 17 | Supply and replacement of cast iron sluice valve of 80mm dia with flanged ends class PN 1 .6 with iron wheel, stainless steel spindle and check nut confirming to IS :14846 incl all jointing materials such as nuts, bolts, washers and gaskets etc complete all as directed. Make:- Kirlosker or its equivelant to BIR / Kartar |
| 18 | Description all as per ser item No. 17 above but 100mm dia. |
| 19 | Description all as per ser item No. 17 above but 150mm dia. |
| 20 | Taking up/down GI water mains (incl all fittings) with flange ends and incl nuts, bolts etc for repair/maintenance of submersible pump set and cleaning of column pipe etc complete of 80/100 mm bore after disconnecting necessary electrical/water connection and including arrangement for tripod, chain pulley and other tools and plants and safety equipments as required at site and necessary cleaning to entire length of pipe both inside and outside and reassembling and lowering in same position and testing complete all as specified and directed.Note : Colum pipe of 100 mm dia if found deteriorated shall be replaced and paid separately under relevant item of schedule. |
| 21 | Supply and layingin repair GI water tubing, medium grade, galvanised (ISI marked as IS-1239), with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor trench complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc), complete, all as specified and directed for 100 mm bore. |
| 22 | Supply and layingin repair GI water tubing, medium grade, galvanised (ISI marked as IS-1239), with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor trench complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc), complete, all as specified and directed for 150 mm bore. |
| 23 | Supply and fixing Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20mm bore and fixed, complete, all as specified and directed. |
| 24 | Supply and fixing Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 25mm bore and fixed, complete, all as specified and directed. |
| 25 | Supply and fixing Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 40mm bore and fixed, complete, all as specified and directed. |
| 26 | Supply and fixing Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 50mm bore and fixed, complete, all as specified and directed. |
| 27 | Disconnectiong existing defective electric motor of any make, any type 5 to 30 HP from electric mains isolating the necked connections, removing from foundation by unscrewing the nuts, bolts etc, discouple from pump, opening of motor for inspection in presence of Engr-in-Charge and carry out minor repairs at site or transporting to workshop and back, reassembling the motor after repair, refixing in position reconnecting same as prior to removing from foundation including replacement of nuts, bolts washers of suitable size, testing and commissioning complete all as specified and directed. Note :- (a) Replacement of defecting parts shall be measured and paid separately as S&F here after. (b) In case of major repairs not possible at site, the motor shall be shifted to Civil workshop, and cost of shifting to wksp and back to site included in the rates. |
| 28 | Taking out old unserviceable/burnt copper winding of motors capacity 30 HP (defective motor taken out in item above) and material and labour for rewinding of electric motor of capacity 30 HP with super enameled copper winding wire of suitable gauge as per existing including cleaning of rotor, slots, all winding/insulation material, varnishing etc. complete and testing at site on full load after reinstallation to the full satisfaction of Engr-in-Charge, complete all as specified and as directed. |
| 29 | Disconnectiong existing defective electric motor of any make 17.5 HP from electric mains isolating the necked connections, removing from foundation by unscrewing the nuts, bolts etc, discouple from pump, opening of motor for inspection in presence of Engr-in-Charge and carry out minor repairs at site or transporting to workshop and back, reassembling the motor after repair, refixing in position reconnecting same as prior to removing from foundation including replacement of nuts, bolts washers of suitable size, testing and commissioning complete all as specified and directed. Note :- (a) Replacement of defecting parts shall be measured and paid separately as S&F here after. (b) In case of major repairs not possible at site, the motor shall be shifted to Civil workshop, and cost of shifting to wksp and back to site included in the rates. |
| 30 | Taking out old unserviceable/burnt copper winding of motors capacity 10 to 17.5 HP (defective motor taken out in item above) and material and labour for rewinding of electric motor of capacity 17 HP with super enameled copper winding wire of suitable gauge as per existing including cleaning of rotor, slots, all winding/insulation material, varnishing etc. complete and testing at site on full load after reinstallation to the full satisfaction of Engr-in-Charge, complete all as specified and as directed. |
| 31 | Supply and fixing in replacement Direct On Line starter for 15/17.5 HP submersible pump 3 Phase 415 volts, complete all as specified and directed. Make: Havell's/L&T/Siemens. |
| 32 | Supply and fixing in replacement Direct On Line starter for 30 HP submersible pump 3 Phase 415 volts, complete all as specified and directed. Make: Havell's/L&T/Siemens. |
| 33 | Supply and fixing in replacement Direct On Line starter for 7.5/10 HP submersible pump 3 Phase 415 volts, complete all as specified and directed. Make: Havell's/L&T/Siemens. |
| 34 | Taking out old unserviceable/burnt copper winding of motors capacity 7.5/10 HP and material and labour for rewinding of electric motor of capacity 7.5/ 10 HP with super enameled copper winding wire of suitable gauge as per existing including cleaning of rotor, slots, all winding/insulation material, varnishing etc. complete and testing at site on full load after reinstallation to the full satisfaction of Engr-in-Charge, complete all as specified and as directed. |
| 35 | Supply, connecting, testing and commissioning in replacement of unsv submersible cable with copper conductor, stranded of size 10 sqmm 3 core, complete, all as specified and as directed. |
| 36 | Construction/repair of old existing Valve pit chamber of size 90cm x 90cm x 90cm internal dimension brick/stone construction including all excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to a distance not exc 50m and depositing were directed, PCC foundation of the mix (1:2:4), type D-2, brick masonry including plastering, rendering 12mm thick in cement mortar (1:4) internally finished even and fair and flush pointing externally as the work proceeds in same mortar and suitable size angle frame with mild steel angle iron 40X40x6mm, MS sheet cover 3.15mm thick with handle and locking arrangements and painting all steel surfaces with two coat of synethic enamelled paint over a coat of red oxide primer and painting all the MS embeded in PCC with two coats of black bitumenous paint as approved, complete all as specified and directed. |
| 37 | Cleaning of underground water sump by pumping out water below suction level, removing all internal deposited sludge by non clogging submersible pump, cleaning the surface of the sump using wire brushes and other scraping tools to remove dirt and scales to make it free from all deposits, washing the sump with high pressure compressor nozzle thoroughly and removing dirty water from the pump to make it clean including repair to the internal surfaces by plastering with cement mortar 1:3,15mm thick and providing fillers at cracks to prevent any seepage of water including disinfecting the sump surfaces, complete, Painting one coat of water proof paint all as specified and directed of from 50000 gallons capacity. (Note:- the work of cleaning and disinfection will be carried out by expert in the field of the work. the work will be carried out in such a way that the water supply is not interupted; necessary bypass arrangement to be done). (Note : For every six months cleaning will be carried out and will be measured as one unit) |
| 38 | Cleaning of Overhead reservoir by draining out water below supply level, removing all internal sludge by washing. Cleaning the surface of the reservoir using wire brushes and other scraping tools to remove dirt and scale to make it free from deposits. Washing the reservoir with high pressure compressor nozzle thoroughly and removing dirty water from the tank to make it clean. Repair to internal surfaces by plastering and providing fillers at cracks to prevent any sepage of water. Disinfecting the sump surface using disinfectent complete all as specified and directed for 50000 gallons capacity (Note:- The work of cleaning and disinfection will be carried out by expert in the field of the work. The work is to be carried out in such a way that the water supply is not disrupted.) (Note : For every six months cleaning will be carried out and will be measured as one unit) |
| 39 | Supply & spraying Bleaching powder of superior quality with latest lot and test certificate from authorized laboratory with min 30% active chlorine (in 25 Kg bags) in and around water supply installations to maintain hygenic enviornment / prevent algae growth at required interval or as and when directed. Make: Nishat/Shriram/Modi. |
| 40 | Supply only Sodium Hypochloride/Calcium hypochloride in granular form as disinfectant suitable for mixing in drinking water and safe for human consumption as per norms complete duly approved from appropiate auth all as specified and directed. make as approved by GE. Please Enable Macros to View BoQ information |
| 41 | Supply only Sodium Hypochloride/Calcium hypochloride in granular form as disinfectant suitable for mixing in drinking water and safe for human consumption as per norms complete duly approved from appropiate auth all as specified and directed. make as approved by GE. Please Enable Macros to View BoQ information |
