|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF), Air Force Station, Phalodi Name of Work :REPAIRS TO FLOORING / TILING, EPU FLOORING, KOTA STONE, PCC AND PLINTH PROTECTION AND CLEANING OF PVC WATER TANK AND SWT IN TECH AREA AT AF STN PHALODI Contract No: GE (AF) PHALODI/ OF 2026-27 Serial Page No. Bidder Name : SCHEDULE 'A'(BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT TEXT # NUMBER TEXT NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER NUMBER # TEXT Srl.No. Item Description Item Code / Make Approx No of Units reqd Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (unreinforcement) of n exc 150 mm in Ground floor provided for pavment or hard standing complete all as specified and directed. |
| 3 | M & L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed. |
| 4 | M&L for 100 mm thick cement concrete (1:4:8), type D-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed. |
| 5 | M&L for 100 mm thick cement concrete B-0, (1:2:4) (12.5mm graded aggregate) as in flooring complete all as specified and as directed. |
| 6 | M & L for 75mm thick PCC (1:3:6 ) type C-2 using 40 mm graded agg in plinth protection and similar works finished even and smooth w/o using extra cement complete all as specified and directed. |
| 7 | Dismantling of marble / kota stone laid bedded & pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed. |
| 8 | M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed and bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes size complete all as specified and directed. |
| 9 | M& L machine cut kota stone slab flooring 18-20mm thick as in vertical surface such as skirting and dado jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including rendering of 10 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and directed. |
| 10 | M&L for cement concrete type B-1, 1:2:4 (12.5mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 12 | M&L Non - skid white ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in CM 1:6 complate all as specified and directed. |
| 13 | M&L for joint free (edge cut) white glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 300x200x7mm / 450X 350X 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete including electric fittings all as specified and directed. |
| 14 | M&L for light shade colour vitrified ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 15 | ditto as item No 13 (above) but in skerting including 8-10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed. |
| 16 | Dismantling of stone slab & tiles laid dry or laid dry & pointed of any description or thickness in floors, aprons etc omplete all as specified and as directed. |
| 17 | M&L for 75mm thick Jodhpur stone having smooth surface use in any type of work with sharp edge and flush jointed in CM (1:6) complete all as specified and as directed. |
| 18 | Fixing only Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and pigment over 25mm sand thickness complete all as specified and directed. |
| 19 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed. |
| 20 | Fixing only Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, with grey cement and pigment over 25mm sand thickness complete all as specified and directed. |
| 21 | M&L for 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 22 | Providing and applying 3 mm thick heavy duty self levelling epoxy polyurethane floor topping, BS 8204-6 and relevant ASTM standard on sound concrete surface, including removal of Exisiting u/s flooring. (Make: Fosroc, Pidilite or equivalent) Carry out surface preparation including grinding or light shot blasting of concrete surface, proper cleaning to remove loose mortar, paint residuals,repairing of floor cracks and dents, and application of screed, primer and EPU top coat of 2 mm all as per manufacturer specification.The cured floor shall exhibit the following properties:Compressive strength (ASTM C109) >43 MPa, Bond strength (ASTM D4541) > 1.5 MPa, Flexural strength (BS 6319) >15 MPa, Tensile strength (BS 6319-7)> 6 MPa, Density (ASTM D792) - 1750-1850 kg/cum, Cure time to light pedestrian traffic - 12 hours, cure time to light wheeled traffic - 36 hours, cure time to medium duty traffic - 48 hours, cure time to heavy duty traffic - 7 days, full chemical resistance - 7 days. Complete all as specified as directed. (Note: Complete procedure to be done by authorised applicator ) |
| 23 | M&L for cleaning the over head PVC/RCC water tanks upto 500 ltr capacity by emptying the water by means of petrol/ electric driven self prime pumps and applying high pressure water jet of pressure not less than 120 PSI on wall and floors of water tanks for removing clogged mud/scales etc and cleaning the same again with self priming pumpd complete all specified as directed. Note: (i) Contractor has to ensure there is no damage / leakage in tank after cleaning . (ii) Any air lock /blockage of water flow after cleaning will be made good immediately. |
| 24 | M&L for cleaning the over head PVC/RCC water tanks upto 500 ltr to 1000 ltr capacity by emptying the water by means of petrol/ electric driven self prime pumps and applying high pressure water jet of pressure not less than 120 PSI on wall and floors of water tanks for removing clogged mud/scales etc and cleaning the same again with self priming pumpd complete all specified as directed. Note: (i) Contractor has to ensure there is no damage / leakage in tank after cleaning . (ii) Any air lock /blockage of water flow after cleaning will be made good immediately. |
| 25 | Dewatering of residual water, disilting and mud Cleaning of SWT of upto capacity 50000 gallon as described below :- (a) The inner surface of the wall of tank shall be cleaned with high pressure jet pump after emptying the water in the tank. (b) After through cleaning of the Tank, the cleaning water and the cleaning water and sludge is to be removed by using pump and sludge has to be disposed off at a place as directed. (c) After made the Tank dirt free, the inner surface of Tank shall be treated with approved anti bacterial agents by GE. (d) After the treatment as mentioned at (c) above , the inner surface of the Tank shall be treated with UV-Radiator. (e) Writing date of cleaning on tank using synthetic enamel paint with letters n. exc 30 cm high complete all as specified and directed. (f) Removal of any tiny plants and vegetation any position and necessary repair work of SWTs. Note :- (a) The size and pattern of letters of date shall be as per format approved by Engineer in charge.(b) The unit rate quoted deemed to be included of cost of bleaching powder or any other cleaning agent to be used for tank cleaning. (c) Cost of Earthwork and excavation at places deemed to be included in unit quoted rate. |
| 26 | Dismantling water tank exc 250 ltrs and n.exc 500ltr capacity and removing from site complete all as directed |
| 27 | Dismantling water tank exc 500 and n.exc 1000ltr capacity and removing from site complete all as specified and directed. |
| 28 | S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed. |
| 29 | S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 1000 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed. |
| 30 | S&F in repairs 20 mm size Ball valve high pressure of PTMT with Epoxy Coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 15 mm-142 gms / 20 mm-210 gms / 25 mm-455 gms / 40 mm-690 gms / 50 mm-1240 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed. |
| 31 | S&F in repairs 25 mm size Ball valve high pressure of PTMTwith Epoxy Coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 15 mm-142 gms / 20 mm-210 gms / 25 mm-455 gms / 40 mm-690 gms / 50 mm-1240 gms) and fly nut complete screwed for iron pipe and fixed complete all as specified and directed. |
| 32 | Dismantling wrought iron or mild steel work of any description by cutting or without damage of structure not otherwise provided for complete all as specified and directed. |
| 33 | S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and directed. |
| 34 | M&L for preparation of new or previsoly untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of Synthetic enamel paint over a coat red oxide primer complete all as specified and directed |
| 35 | M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed |
| 36 | M&L Taking down cement lime or cement mortar plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) all as specified & directed . |
| 37 | M&L for 15mm thick plaster in two layer on external surfaces :- 1 layer 10mm thick in CM (1:4) & 2nd layer 5mm thick in CM (1:4) on fair faces of concrete or masonary surfaces with water proofing compound @ 3% by weight of cement on concrete or masonary surfaces and finished even and smooth without using extra cement complete all as specified and directed.Note: Water proofing compound shall be measured and paid for seperately as supply only under respective item. No extra cost will be pay for all jams, chajjas, projection, etc |
| 38 | Supply only integral water proofing compound conforming to relevant IS complete all as specified and directed. |
| 39 | M & L for prepartion of newly plastered surfaces on walls and applying two coats of cement based paint over one coat of primer on wall complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
