Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Please Enable Macros to View BoQ information BOQ Providing and placing of furniture items for M. P. Private university near Kaliasot Dam Bhopal. Tenders are invited from OEM or their Authorized Dealers for supplying of furniture items, incase of dealers quoting for the project authorization from original manufacturer to be attached for this project. PAC - Rs. 10510000.00 TIME ALLOWED - 6 MONTHS S.NO ITEMS UNIT QTY RATE AMOUNT |
| 2 | Providing And Placing of Center Table : It should be made of seasoned wood (3” x 3”) with dark Mahagony melamine polish. The glass top to be supported on complete rectangular wooden frame, duly polished in mahagony melamine finish. The glass top must have etching work. One additional shelf below the main top Overall size: 45.0 cm (H) x 105.0 cm (W) x 60.0 cm (D). Approved Furniture Make - Godrej l (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 3 | Providing & Placing of 1 Seater Recliner : Overall Size :Width : 1062mm Depth : 860mm Height : 1110mm Seating Height : 50 Upholstery: Material : EPU Fab Leather (Micro fiber) . Thickness : 1 mm Frame : Material : Combination of plywood and pine Wood , Plywood thickness : 12 mm (moisture resistance and termite free) , Pinewood cross section ( without knots) Moisture content : 10 -12 %.Foam :Seat : Material : Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top Pocket spring of diameter 2 mm is emebdded in seat, Back : The front of the backrest is made of loose conjugated polyester fibre which is weighed & filled in the upholstery to make the required cushion .Webbing: S spring of wire diameter of 3.8 mm Mechanism. Leggett & Platt make. It is made up of mild steel linkages which are riveted together. The reclining mechanism is tested for 158 kg load.Legs : PVC bushes fitted at the bottom surface of reclining mechanism. Approved Furniture Make - Godrej |
| 4 | Providing & Placing of 3 Seater Recliner : Overall Size :Width : 2219mm Depth : 860mm Height : 1110mm Seating Height : 50 Upholstery: Material : EPU Fab Leather (Micro fiber) . Thickness : 1 mm Frame : Material : Combination of plywood and pine Wood , Plywood thickness : 12 mm (moisture resistance and termite free) , Pinewood cross section ( without knots) Moisture content : 10 -12 %.Foam :Seat : Material : Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top Pocket spring of diameter 2 mm is emebdded in seat, Back : The front of the backrest is made of loose conjugated polyester fibre which is weighed & filled in the upholstery to make the required cushion .Webbing: S spring of wire diameter of 3.8 mm Mechanism. Leggett & Platt make. It is made up of mild steel linkages which are riveted together. The reclining mechanism is tested for 158 kg load.Legs : PVC bushes fitted at the bottom surface of reclining mechanism. Approved Furniture Make - Godrej |
| 5 | Providing & Placing of 1 Seater Executive Recliner : The Product should have, smooth reclining mechanism, excellant lumber support, upholstry made up of full PVC upholstery. The Frame of recliner should be made up of Rubber Wood . The Seat Foam should be 24Kg/Cu Mtr. Density foam. The Back Foam should be 24 Kg / cu Mtr.Density . Webbing Material - 3.5 mm thick S Spring. The legs should consist of MSL Angle + Leveling bush. Overall size of D - 880 mm x W - 830 mm x H - 1005 x SH- 450 mm. Approved Furniture Make - Godrej (Greenguard GOLD/GRIHA/BIFMA Level Certification.) Design as approved by Engineer-In-charge. |
| 6 | Providing And Placing of EXECUTIVE MAIN TABLE + SIDE TABLE : The Main Table should be of Size - 1650 x 750 x 750 with ERU of Size - 900 x 500 x 750. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in- power box are provided on work surface for wire management Secondary work surface ( ERU ) of size - 1200 x 500 x 750 should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening Pedestals are provided with lock for security and footrest Approved Furniture Make - Godrej (CII GREENPRO,UL GREENGUARD, GRIHA, SCS INDOOR ADVANTAGE GOLD, Greenguard Certified Product) Design as approved by Engineer-In-charge. |
| 7 | Providing And Placing of 3 Seater : The 3 Seater sofa Overall Size : Width : 1785mm Depth : 835mm Height : 825mm Seating Height : 450mm. stitching: thread- polyester. pitch- 5 stitch per inch( pitch of thread i.e. stitch per inch). leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite)- fabric：d3/d5/d6 leather look fabric 100%polyester. thickness (mm) :0.9mm. weight (gsm) : 250g/m2. tensile strength {wrap/weft} (kg/cm) :nil. bursting strength (kg/cm2) :nil. colour fastness to rubbing {dry /wet} (scale 1-5) :grade4. frame material (tropical wood / pine wood/ rubber wood): solid plywood frame. moisture content ( 10 – 12 %) :less than12%. thickness of plywood used(mm) :9mm/12mm/18mm/30mm. standard of plywood used: {required standard : is 303 commercial plywood}. seat foam: (density, type)- thickness (mm) :100mm. density (kg/m3):30. type of foam (virgin/composite/moulded/ slabstock) :seat foam:5cm pure foam 3030(30density)+5cm rebond foam. covering :decron sheet spec.150g 70g. back foam: (density, type)- solid decron 7d/64mm. belt/ webbing material:nylon webbing- width of belt (mm) :back:45mm/seat:50mm. Approved Furniture Make - Godrej (Greenguard Asuurance Product) Design as approved by Engineer-In-charge. |
| 8 | Providing And Placing of 2 Seater : The 2 Seater sofa Overall Size : Width : 1275mm Depth : 835mm Height : 825mm Seating Height : 450mm. stitching: thread- polyester. pitch- 5 stitch per inch( pitch of thread i.e. stitch per inch). leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite)- fabric：d3/d5/d6 leather look fabric 100%polyester. thickness (mm) :0.9mm. weight (gsm) : 250g/m2. tensile strength {wrap/weft} (kg/cm) :nil. bursting strength (kg/cm2) :nil. colour fastness to rubbing {dry /wet} (scale 1-5) :grade4. frame material (tropical wood / pine wood/ rubber wood): solid plywood frame. moisture content ( 10 – 12 %) :less than12%. thickness of plywood used(mm) :9mm/12mm/18mm/30mm. standard of plywood used: {required standard : is 303 commercial plywood}. seat foam: (density, type)- thickness (mm) :100mm. density (kg/m3):30. type of foam (virgin/composite/moulded/ slabstock) :seat foam:5cm pure foam 3030(30density)+5cm rebond foam. covering :decron sheet spec.150g 70g. back foam: (density, type)- solid decron 7d/64mm. belt/ webbing material:nylon webbing- width of belt (mm) :back:45mm/seat:50mm. Approved Furniture Make - Godrej (Greenguard Asuurance Product) Design as approved by Engineer-In-charge. |
| 9 | Providing And Placing of 1 Seater : The 1 Seater sofa Overall Size : Width : 855mm Depth : 835mm Height : 825mm Seating Height : 450mm. stitching: thread- polyester. pitch- 5 stitch per inch( pitch of thread i.e. stitch per inch). leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite)- fabric：d3/d5/d6 leather look fabric 100%polyester. thickness (mm) :0.9mm. weight (gsm) : 250g/m2. tensile strength {wrap/weft} (kg/cm) :nil. bursting strength (kg/cm2) :nil. colour fastness to rubbing {dry /wet} (scale 1-5) :grade4. frame material (tropical wood / pine wood/ rubber wood): solid plywood frame. moisture content ( 10 – 12 %) :less than12%. thickness of plywood used(mm) :9mm/12mm/18mm/30mm. standard of plywood used: {required standard : is 303 commercial plywood}. seat foam: (density, type)- thickness (mm) :100mm. density (kg/m3):30. type of foam (virgin/composite/moulded/ slabstock) :seat foam:5cm pure foam 3030(30density)+5cm rebond foam. covering :decron sheet spec.150g 70g. back foam: (density, type)- solid decron 7d/64mm. belt/ webbing material:nylon webbing- width of belt (mm) :back:45mm/seat:50mm. Approved Furniture Make - Godrej (Greenguard Asuurance Product) Design as approved by Engineer-In-charge. |
| 10 | Providing And Placing of Wardrobe with Mirror : Size:2000mm(W) x 537mm(D) x 1980mm(H).Construction & Material: Welded construction. 0.8mm thk CRCA for doors, back, full shelf & locker shelf . 0.63mm thk CRCA half shelf . 0.9mm thk CRCA for all other components.Locking & handle:Mazak handle .Three way locking mechanism with shooting bolt .Locker: Fixed half locker with secret compartment.Hinged Door for locker . 2 way locking mechanism for locker door, fixed drawer. Shelving: Height wise adjustable shelf mounting .1Nos. of adjustable full Shelf, 1Nos. of fixed full shelf, 1nos of adjustable half shelf .Hanging Rod & Tie bar:1.0mm thk ERW tube for hanging rod . 1.0mm thk aluminum for tie bar .Leveler:M10 screw type leveler with hex plastic base.Finish:Epoxy Powder coated to the thickness of 50 microns (+-10). Approved Furniture Make - Godrej |
| 11 | Providing & Placing of CENTER TABLE : The table should be of size 1000 W x 600 D x 428 H with Glass top of 08 mm thick tempered and Solid rubber wood legs and frame with MS sheet as bottom shelf. POWDER COATING COLOR & DFT IN MICRONS -40-80 Microns .Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 12 | Providing & Placing of CORNER TABLE : The table should be of size 500 W x 500 D x 428 H with Glass top of 08 mm thick tempered and Solid rubber wood legs and frame with MS sheet as bottom shelf. POWDER COATING COLOR & DFT IN MICRONS -40-80 Microns .Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 13 | Providing & Placing of TWO Seat Executive Sofa : Understructure: Understructure is made up of pinewood members. Pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. 3mm MDF is stapled on the seat front baton. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring assembly to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete understructure is made by gluing, nailing & stapling. • FOAM : Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3. • UPHOLSTERY : Seat upholstery is made in polyester fabric with partitions.Backrest :Understructure: Understructure ‹s made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm, 12x22mm & 16x74mm and triangular batons of 22x75 without having major knots & defects on the surface. HDPE sheet is stapled on the back and front of the structure and on the ear ply. • FOAM : Backrest is made up of combination of PU foam with density 28 kg/m3 and 32 kg/m3 super-soft on the front lumber portion and the shoulder area has supersoft PU foam with density 32 kg/m3. This is coveFed with a top layer of 200 gsm recron sheet. The top surface has foam with density 32 kg/m3 and a layer of 200 gsm recron sheet. Complete back surface & underarm of backrest is glued with the PU foam with density 28 kg/m3. • UPHOLSTERY: Backrest upholstery is made in polyester fabric jacket with recron sheet cushions of 200 gsm sandwitched between a layer of white non-woven cloth of 30 gsm. The upholstered jacket has a button at the front. ARMREST:• Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303j & pinewood are of cross section 16X35mm without having major knots & defects on the surface. 2mm cardboard and HDPE sheet is stapled on the structure to provide a surface for sticking foam. • FOAM : Armrest is made of PU foam with density 28 kg/m3. • UPHOLSTERY : Armrest upholstery is made in polyester fabric.Legs: Option A: Rubberwood [Grade-Aj legs with the M8 stud for fitting at the bottom surface of the Armrest LH & RH. Legs are coated with PU clear lacquer coat [black matt finish].[Min. hardness - 1H] Option B: Plastic injection moulded tegs made of material PA-6 with insert of M8 stud for fitting at the bottom surface of the Armrest LH & RH. Plastic legs are black [matte finish]. ASSEMBLY : Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. PACKET Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of rubberwood legs/ plastic injection moulded legs. Size - 2 Seater (W)1500*(D)820*(H)900mm. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 14 | Providing & Placing of THREE Seat Executive Sofa : Understructure: Understructure is made up of pinewood members. Pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. 3mm MDF is stapled on the seat front baton. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring assembly to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete understructure is made by gluing, nailing & stapling. • FOAM : Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3. • UPHOLSTERY : Seat upholstery is made in polyester fabric with partitions.Backrest :Understructure: Understructure ‹s made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm, 12x22mm & 16x74mm and triangular batons of 22x75 without having major knots & defects on the surface. HDPE sheet is stapled on the back and front of the structure and on the ear ply. • FOAM : Backrest is made up of combination of PU foam with density 28 kg/m3 and 32 kg/m3 super-soft on the front lumber portion and the shoulder area has supersoft PU foam with density 32 kg/m3. This is coveFed with a top layer of 200 gsm recron sheet. The top surface has foam with density 32 kg/m3 and a layer of 200 gsm recron sheet. Complete back surface & underarm of backrest is glued with the PU foam with density 28 kg/m3. • UPHOLSTERY: Backrest upholstery is made in polyester fabric jacket with recron sheet cushions of 200 gsm sandwitched between a layer of white non-woven cloth of 30 gsm. The upholstered jacket has a button at the front. ARMREST:• Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303j & pinewood are of cross section 16X35mm without having major knots & defects on the surface. 2mm cardboard and HDPE sheet is stapled on the structure to provide a surface for sticking foam. • FOAM : Armrest is made of PU foam with density 28 kg/m3. • UPHOLSTERY : Armrest upholstery is made in polyester fabric.Legs: Option A: Rubberwood [Grade-Aj legs with the M8 stud for fitting at the bottom surface of the Armrest LH & RH. Legs are coated with PU clear lacquer coat [black matt finish].[Min. hardness - 1H] Option B: Plastic injection moulded tegs made of material PA-6 with insert of M8 stud for fitting at the bottom surface of the Armrest LH & RH. Plastic legs are black [matte finish]. ASSEMBLY : Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure. PACKET Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of rubberwood legs/ plastic injection moulded legs. Size - 3 Seater (W)1890*(D)820*(H)900mm. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 15 | Providing & Placing of CORNER TABLE : Corner Table consist of under frame made of rubber wood and top is of high density plywood. The top of both the tables are 24 mm thick and have a higher load bearing capacity than glass top. The matching curved leg evokes a premium look which adds to the aesthetics. Load bearing capacity : 30 Kg overall dimensions 600W x 600D x 480H. Approved Furniture Make - Godrej l (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 16 | Providing And Placing of Executive Revolving Leather Highback Chair : The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring core, super soft foam of 32 kg/m3 density and edging foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette.The back assembly is made up of a combination of pinewood members, 12mm thick MR Grade plywood and 2mm thick cardboard, layered with slab stock foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette 3. ARMPAD ASSEMBLY: The armpad assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated brackets, layered with foam of 60 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. CENTER TILT WITH MULTI POSITION LOCK MECHANISM : The mechanism is designed^th the following features : 360° revolving type 3 position locking Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The Class 4 6. PEDESTAL ASSEMBLY : The pedestal Is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color-coated internal surface. It is fitted with 5 castors and has a pitch-center diameter of 67.5±0.5 cm (77.5±1.0 cm with castors). 7. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black polyamide. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge |
| 17 | Providing & Placing of Sofa One Seater : The one seater sofa should be 700 (W) x 835 (D) x 850 (H0 mm & Seat Height shall be 460 mmin Size. Stitching thread Polyproplene.Thickness of Plywood used(mm) :12mm & 18mm .IS 303 Commercial Plywood. Vergin Moulded Foam- Density- 32d Seat Foam (27 H) .Upholstry P U German Leather BN 3592. LEGS should be made of Solid Rubber Wood. Design as per approved by Technical Commiitee/Engineer Incharge. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge |
| 18 | Providing & Placing of Sofa Three Seater : The Three seater sofa should be 1790 (W) x 835 (D) x 850 (H0 mm & Seat Height shall be 460 mmin Size. Stitching thread Polyproplene.Thickness of Plywood used(mm) :12mm & 18mm .IS 303 Commercial Plywood. Vergin Moulded Foam- Density- 32d Seat Foam (27 H) .Upholstry P U German Leather BN 3592. LEGS should be made of Solid Rubber Wood. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 19 | Providing & Placing of CORNER TABLE : Corner Table consist of under frame made of Enineered wood and top is of Clear, toughened glass. Load bearing capacity : 30 Kg overall dimensions 450W x 450D x 570H. Approved Furniture Make - Godrej l (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 20 | Providing And Placing Height Adjustable Table : Double column height adjustment table should comes with an electric motor incorporated at the center of cross member in the understructure which gives an adjustable work surfaces range from 560 to 1190 mm height from ground The Worktop size shall be 900 x 600mm Top is to be made of 25mm thick Pre-Laminated board of interior grade conforming to IS: 12823. All the edges of the panel are provided with machine pressed 2mm thick PVC lipping. Understructure comprises of a combination of ERW mild steel rectangular tubes of varying sizes(75X75X1.5thk; 70X70X1.5thk; 65X65X1.5thk) and 3mm thk H.R (as per IS:2062) welded and fixed together to form the skelton.The understructure is coated with min. 45 micron thickness of epoxy polyester powder. (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 21 | Providing and placing of Glass Door Storage : This Modular Storage Main Unit should be knockdown in construction. All side panels, top / bottom panels, shelf panels are to be made from CRCA MS sheet, thickness ranging from 0.5 to 0.8 mm. Legs are to be fitted with screw type levelers of height 40 mm. Height wise adjustable shelf mounting, 4 shelves, load capacity of 40 Kgs UDL. All steel components to be epoxy powder coated to 50 microns (+/- 10). Label holder made from clear acrylic sheet of size 155 (W) x 102(H) to be provided. Door should be made from combination of alluminium alloy (63400) extrusion and clear glass with soft closing hinge. Handle should be made of alluminium. Cam Lock with three way locking arrangement for safety. Finish epoxy polyester coated to the thickness of 50 microns (+/- 10 microns) Main Unit Overall size : 900mm W x 1925mm H x 450mm D. Approved Furniture Make - Godrej (CII GREENPRO, UL GREENGUARD, SCS INDOOR ADVANTAGE GOLD Certified Product.) Design as approved by Engineer-In-charge. |
| 22 | Providing And Placing of Bedside Table : Bed Side Table should be of size 460 (W) x 461 (D) x 510 (H) (mm). FEATURES & SPECIFICATIONSSide Table should have one utility Drawer with Membrane Foil finish on MDF facia Use of E1 grade boards for construction ensures very low VOC emissions and superior Indoor Air Quality 0.8mm thick PVC edge Banding of highest Quality Excellent quality of Hardware used. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.). Design as approved by Engineer-In-charge. |
| 23 | Providing And Placing of king Bed : King Bed shall 2071 (L) x 1875 (W) x 1082 (H) (mm) FEATURES & SPECIFICATIONS Half Pull-Out Drawer Storage + Half Manual Lift-up Storage Suitable Bed base height from the floor even for 8” or thicker mattress Sturdy construction through use of Metal Frame skeletal structure – 1.2 mm thick metal pipe structure with epoxy powder coating Body made from Melamine Impregnated Paper on Prelaminated Particle Board – Mix of 18mm and 25mm thick for higher strength and durability. Boards are of E1 grade for – contributes to superior Indoor Air Quality through low VOC emission Headboard made from combination of High-quality Membrane Foil on MDF 25mm boards and Prelaminated Particle Board 2mm thick PVC edge banding of highest quality and excellent quality of hardware. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.). Design as approved by Engineer-In-charge. |
| 24 | Providing And Placing of Study Chair : The structure consists of Top & Bottom Ring made of 025.4 x 1.6thick Round Electric Resistance Welded Tubes (ERW), and connected by Vertical Members made of 019 x 1.6thick Round Electric Resistance Welded Tubes (ERW). The Understructure shall be welded together using Tungsten Inert Gas (TIG) Welding. The whole structure is Epoxy Polyester Powder Coated (OFT 40-60 microns). The Frame rests on a base made of 18mm thick Plywood (As per IS:303) . The Seat Base is also made of the same. Both are fixed with the understructure using welded Brackets made of 3mm thick Hot Rolled Steel Plates (HR) (As per IS:2062). It is to be assembled using alloy steel hardware (blackened & coated with rust preventive oil). A 3mm Flexi-ply envelopes the tubular frame, pop-rivetted to Brackets made of 1mm thick Cold Rolled Close Annealed Steel Sheets (CRCA) (As per IS:513) and welded onto the understructure. The Flexi-ply is to be covered with a layer of 12mm PU Slab-stock foam. The entire structure is upholstered with a combination of Mesh Fabric & Leatherette. The Seat is to be made of 100mm PU Slab-stock Foam pasted onto a 9mm thick Plywood (As per IS:303) with a dual layered upholstery of Mesh Fabric and Leatherette. The Neckrest is to be made up of multiple layers of 12mm PU Slab-stock Foam pasted onto together and upholstered with Mesh Fabric and Leatherette. The ADGustable position and Ergonomic shape provide extra comfort. Size - 1250 W x 1110 D x 885 H mm & Seat Height should be 300 mm.. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 25 | Providing And Placing of Premium 1 Seater Sofa : The Overall Size : Width : 770mm Depth : 845mm Height : 870mm Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] 8 pinewood are cross section [22x40] mm are without major knots & defects on the surface. 2mm cardborad is stapled on the curved inside taper / vertical 8 outer vertical surface to stick the foam. Complete understructure is made by gluing 8 stapling.Foam: Armrest foaming is done with the PU foam with density 28 kg/m3.Upholstry: upholstry is made in the dual tone colour with polyester plain fabric & leatherite option.Armrest Top Cushion:Understructure: Understructure is made of combination 12+1mm, 6+1mm thk. plywood & pinewood of 22x40mm by gluing & stapling. Powder coated MS hook of 1.2mm thk. are mounted on the back side of cushion for mounting the cushion with the body structure.Foam: Armrest top cushion is made of two layers of supersoft PU foam with density 32 kg/m3. Recron sheet of 200GSM is wrapped & glued above this foam.Upholstry: Armrest Top Cushion upholstry is made in polyester plain & pattern fabric.Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws. Before fixing legs, non-woven fabric is stapled on the bottom surface to cover the structure.Packet: One packet per Qty. 1No. of each SKU. Each packet contained assembled armrest without legs & hardware packet. As per drawing & specification and directed by Engineer-in-Charge. Approved Furniture Make - Godrej,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. |
| 26 | Providing And Placing of Premium 2 Seater Sofa : The Overall Size : Width : 1315mm Depth : 845mm Height : 870mm Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] 8 pinewood are cross section [22x40] mm are without major knots & defects on the surface. 2mm cardborad is stapled on the curved inside taper / vertical 8 outer vertical surface to stick the foam. Complete understructure is made by gluing 8 stapling.Foam: Armrest foaming is done with the PU foam with density 28 kg/m3.Upholstry: upholstry is made in the dual tone colour with polyester plain fabric & leatherite option.Armrest Top Cushion:Understructure: Understructure is made of combination 12+1mm, 6+1mm thk. plywood & pinewood of 22x40mm by gluing & stapling. Powder coated MS hook of 1.2mm thk. are mounted on the back side of cushion for mounting the cushion with the body structure.Foam: Armrest top cushion is made of two layers of supersoft PU foam with density 32 kg/m3. Recron sheet of 200GSM is wrapped & glued above this foam.Upholstry: Armrest Top Cushion upholstry is made in polyester plain & pattern fabric.Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws. Before fixing legs, non-woven fabric is stapled on the bottom surface to cover the structure.Packet: One packet per Qty. 1No. of each SKU. Each packet contained assembled armrest without legs & hardware packet. As per drawing & specification and directed by Engineer-in-Charge. Approved Furniture Make - Godrej ,GRIHA,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. |
| 27 | Providing And Placing of Premium 3 Seater Sofa : The Overall Size : Width : 1855mm Depth : 845mm Height : 870mm Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] 8 pinewood are cross section [22x40] mm are without major knots & defects on the surface. 2mm cardborad is stapled on the curved inside taper / vertical 8 outer vertical surface to stick the foam. Complete understructure is made by gluing 8 stapling.Foam: Armrest foaming is done with the PU foam with density 28 kg/m3.Upholstry: upholstry is made in the dual tone colour with polyester plain fabric & leatherite option.Armrest Top Cushion:Understructure: Understructure is made of combination 12+1mm, 6+1mm thk. plywood & pinewood of 22x40mm by gluing & stapling. Powder coated MS hook of 1.2mm thk. are mounted on the back side of cushion for mounting the cushion with the body structure.Foam: Armrest top cushion is made of two layers of supersoft PU foam with density 32 kg/m3. Recron sheet of 200GSM is wrapped & glued above this foam.Upholstry: Armrest Top Cushion upholstry is made in polyester plain & pattern fabric.Legs: Plastic PP moulded legs are used & fitted at the bottom surface with the chipboard screws. Before fixing legs, non-woven fabric is stapled on the bottom surface to cover the structure.Packet: One packet per Qty. 1No. of each SKU. Each packet contained assembled armrest without legs & hardware packet. As per drawing & specification and directed by Engineer-in-Charge. Approved Furniture Make - Godrej ,GRIHA,,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. |
| 28 | Providing And Placing of Premium Mid Back Chair : SEAT WITH ARMREST ASSEMBLY The seat assembly consists of 15 mm thick molded plywood,layered with acombination of PU foam of 45 kg/m³ density and slab stock foam of28 kg/m³density. This sub-assembly is then upholstered with aleatherette cover.ARMRESTASSEMBLY:The armrest assembly is made of 18mm thick dualplywood, surrounded by slab stock foam with adensity of 60 kg/m³.The plywood and slab stock foam sub-assembly s then wrapped in a 30 GSM non-woven cover,and the entire sub-assembly is upholstered with a leatherette armrest cover. CENTER TILT WITHMULTIPOSITIONLOCK MECHANISM : The mechanism is designed with the following features : 60°revolving type, 3 position locking ,Tilt tension adjustment. PN E U MATIC HE IG HT ADJUSTMENT the pneumatic height adjustment has a stroke of 10.0±0.3cm. PEDESTAL:The pedestal is made of die-cast aluminium with a buffed finish. It is fitted ith 5 nos. twin wheel castor.The pedestal has a 75.0±0.5cm pitch-center dia TWIN WHEEL CASTOR:5 Nos. twin wheel soft castors,which are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel diameter and assembled to the buffed pedestal. Size in mm - 808W x 886D x 1010 - 1100H, 565 SH. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge |
| 29 | Providing And Placing of Premium Executive Very High Back Chair : SEAT WITH ARMREST ASSEMBLY - The seat assembly consists of 15 mm thick molded plywood,layered with acombination of PU foam of 45 kg/m³ density and slab stock foam of28 kg/m³density. This sub-assembly is then upholstered with aleatherette cover.ARMRESTASSEMBLY:The armrest assembly is made of 18mm thick dualplywood, surrounded by slab stock foam with adensity of 60 kg/m³.The plywood and slab stock foam sub-assembly s then wrapped in a 30 GSM non-woven cover,and the entire sub-assembly is upholstered with a leatherette armrest cover. CENTER TILT WITHMULTIPOSITIONLOCK MECHANISM : The mechanism is designed with the following features : 60°revolving type, 3 position locking ,Tilt tension adjustment. PN E U MATIC HE IG HT ADJUSTMENT the pneumatic height adjustment has a stroke of 10.0±0.3cm. PEDESTAL:The pedestal is made of die-cast aluminium with a buffed finish. It is fitted ith 5 nos. twin wheel castor.The pedestal has a 75.0±0.5cm pitch-center dia TWIN WHEEL CASTOR:5 Nos. twin wheel soft castors,which are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel diameter and assembled to the buffed pedestal. Size in mm - 808W x 886D x 1150 - 1250H, 560 SH. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge |
| 30 | Providing & Placing of Modular steel Almirah : The modular steel body almirah with Steel doors should have base unit of size - 450 W x 1950 H x 500 D mm & Addon body of size - 900 W x 1950 H x 500 D mm.The body shall be aesthetically appealing plain, made from combination of dent resistance 0.5mm & CRCA 0.8 mm. The appealing doors should be compositely made from CRCA Sheet Hanging rod shall be 1.0mm thick MS ERW oblong tube and legs should be fitted with screw type leveler. All MS sheet metal and metal frame components shall be powder coated with epoxy polyster powder to the thickness of 50-60microns. Both Base & Addon unit should consist of a lockable Drawer unit. High quality hardware should be used like screw, washer, shelf supporters, lock, Door hinges, Bumper etc. Design as per approved by Technical Commiitee/Engineer Incharge . Make-Godrej/Herman Miller/Haworth or Equivalent. |
| 31 | Providing and Placing of Premium Executive King Bed : It should be of Size 2010 (L) x 1900 (W) x 1170 (H) (mm) All the 18 mm thick prelaminated particle board panel are provided with 1.5mm thick PVC Lipping. Mattress frame lift up is based on eletro - mechianical actuator of ti-motion make. hinges KD Fitting and dowels areof hettich, levelers to the bed ebco make. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.). Design as approved by Engineer-In-charge. |
| 32 | Providing And Placing of Executive Premium 2 Seater Sofa : The 2 Seater sofa with Upholstery Fabric PVC Thickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 %. Seat Foam Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 1515(W) x 840(D) x 750(h). Approved Furniture Make - Godrej (GRIHA/Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 33 | Providing And Placing of Executive Premium 3 Seater Sofa : The 3 Seater sofa with Upholstery Fabric PVC Thickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 %. Seat Foam Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 1815(W) x 840(D) x 750(h). Approved Furniture Make - Godrej (GRIHA/Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 34 | Providing And Placing of EXECUTIVE VISITOR FIXED CHAIR : The chair should be of size 60.9 (W) x 64.2 (D) 98.2cm cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be 47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/-0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. Mechanism - the tubular frame shall be cantilever type & made up of 02.54+/-0.03cm x 0.2+/-0.016cm thk S.S 202 tube. The back connect to frame through chrome platedhigh pressure die cast connector piece. Approved Furniture Make - Godrej (CII GREENPRO/ UL Greenguard Gold/GRIHA/SCS INDOOR ADVANTAGE GOLD/BIFMA Level 2 Certified Product.) Design as approved by Engineer-In-charge. |
| 35 | Providing & Placing of Media Unit : Overall Size : Width : 180.4cm Depth : 49.5cm Height : 50.4cmMaterial :All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom is made of .9 mm thick prelaminated particle board. Drawer front is made of 18 mm thick PU painted MDF. Middle doors are made of 4mm thick toughened glass with PU paint in black .All drawers are fitted with knobs. Legs : Rubber wood Hardware : Hettich .Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 2 nos. Approved Furniture Make - Godrej l (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 36 | Providing And Placing of Modular Conference Table : Work surface to be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes. Understructure It consist of 18mm Thick Pre-laminated twin board of E1P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction. Modesty Panel Made of 18mm Thick Pre laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Manager An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Overall Size is made to be 1775W x 4800L mm. Single seater 675 W x 600 D, Two seater 1350 W x 600 D Half Round (2 Seater) R 850, 30degree Corner (1 Seater) R 760 x 630. Head Module 3-4 seater 1800W x 850D, Head Module 4 - 5 seater 2350W x 850D Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 37 | Providing And Placing of Premium 1 Seater Sofa : The 1 Seater sofa with Upholstery Fabric PVC Thickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 %. Seat Foam Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 1005(W) x 975(D) x 930(h). Approved Furniture Make - Godrej (GRIHA/Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 38 | Providing And Placing of Project 2 Seater Sofa of APPROVED make Godrej : The 2 Seater sofa with Upholstery Fabric PVC Thickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 %. Seat Foam Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 1600(W) x 975(D) x 930(h). Approved Furniture Make - Godrej (GRIHA/Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 39 | Providing And Placing of Premium 3 Seater Sofa : The 3 Seater sofa with Upholstery Fabric PVC Thickness : 1 mm. Frame Material shall be Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 %. Seat Foam Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated Approx Size (in mm) : 2310(W) x 975(D) x 930(h). Approved Furniture Make - Godrej (GRIHA/Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 40 | Providing And Placing of Premium Pouffe : The inner structure is to be made with a combination of 18mm thick Plywood (As per IS:303) & Pine-Wood members. It is be covered from the sides using 2mm kraft-board. Complete understructure is to be made by gluing, nailing & stapling. Seat is to be made of 100 mm PU Slab-stock Foam should be pasted on top of the structure.The understructure is covered with a layer of 12mm PU Slab-stock Foam around the sides. The structure is upholstered with fabric on the sides, and a combination of Mesh Fabric. (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 41 | Providing And Placing of QUILTED BONDED FOAM MATTRESS : The mattress shall be of size - 1981 x 1829 x 125 mm.The mattress should be made of Bonded foam thickness 120 mm & the bonded is of 90 density (kg/m3). Quilting should be done on both side of mattress ,top foam quilting should be 20 mm thick of 18 density foam. Bottom foam quilting should be 20 mm thick and of 18 density foam. total thickness of mattress 160mm +/- 5mm. side boarder quilting shall be of 5mm foam of 18 desnisity,edges should to round Fabric beige of 240 (Non Wooven)Atul Textile. Guarantee should be 10 years. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 42 | Providing & Placing of Media Unit : Overall Size : Width : 2400mm Depth : 470mm Height : 1900mmMaterial :All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom is made of .9 mm thick prelaminated particle board. Drawer front is made of 18 mm thick PU painted MDF. Middle doors are made of 4mm thick toughened glass with PU paint in black .All drawers are fitted with knobs. Legs : Rubber wood Hardware : Hettich .Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 43 | Providing And Placing of Pillow : Pillow should made of siliconized fibre of and cover should be of Cotton/ Poleyster fabric duely switched Size 18\\" X 24\\" Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 44 | Providing And Placing of Single Seater Executive Sofa of Greenguard/BIFMA Certified Co. : Overall size of 860 W x 905 D x 820 H mm.With Seating Area of Width 450mm. The seat should be made up of 28 Density PU Foam +/- 2 Kg/cu.mtr with an additional top layer of super soft PU foam of 32 Desity +/- 2kg/cu.mtr and uphoslted with fabric. The back should be made up of 28 Density PU Foam +/- 2 Kg/cu.mtr with an additional top layer of super soft PU foam of 32 Desity +/- 2kg/cu.mtr and uphoslted with fabric. The under structure should be made of 120mm thick hot pressed plywood (moisture resistance & termite proof as per IS : 303) & pinewood of cross section devoide of major knots & surface defects 6 Nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. legs should be made of stainless steel (grade SS 202) tube & plate with plastic end cap. Approved Furniture Make - Godrej l (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 45 | Providing And Placing of Two Seater Executive Sofa : Overall size of 1460 W x 905 D x 820 H mm.With Seating Area of Width 450mm. The seat should be made up of 28 Density PU Foam +/- 2 Kg/cu.mtr with an additional top layer of super soft PU foam of 32 Desity +/- 2kg/cu.mtr and uphoslted with fabric/Leatherite. The back should be made up of 28 Density PU Foam +/- 2 Kg/cu.mtr with an additional top layer of super soft PU foam of 32 Desity +/- 2kg/cu.mtr and uphoslted with fabric. The under structure should be made of 120mm thick hot pressed plywood (moisture resistance & termite proof as per IS : 303) & pinewood of cross section devoide of major knots & surface defects 6 Nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. legs should be made of stainless steel (grade SS 202) tube & plate with plastic end cap. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 46 | Providing And Placing of Three Seater Executive Sofa : Overall size of 2060 W x 905 D x 820 H mm.With Seating Area of Width 450mm. The seat should be made up of 28 Density PU Foam +/- 2 Kg/cu.mtr with an additional top layer of super soft PU foam of 32 Desity +/- 2kg/cu.mtr and uphoslted with fabric/Leatherite. The back should be made up of 28 Density PU Foam +/- 2 Kg/cu.mtr with an additional top layer of super soft PU foam of 32 Desity +/- 2kg/cu.mtr and uphoslted with fabric. The under structure should be made of 120mm thick hot pressed plywood (moisture resistance & termite proof as per IS : 303) & pinewood of cross section devoide of major knots & surface defects 6 Nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. legs should be made of stainless steel (grade SS 202) tube & plate with plastic end cap. Approved Furniture Make - Godrej l(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 47 | Providing And Placing of 2 Seater Premium lounge Chair Cushioned for Waiting Rooms : size: W 1130 mm X D 700 mm X H 785 mm, Seat height: 435 mm, SIDE FRAME ASSEMBLY: The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The ends are fitted with ABS moulded end caps. TIE MEMBER: It is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. The tie-member is made of MS. E.R.W. tube dia.3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The seat/back assemblies are mounted on one of the tie- member which has 5cm x 5.5cm long x 0.5cm. thk MS. Std. angles welded to mount the seat and back. SEATREST ASSEMBLY: The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover. SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T). BACKREST ASSEMBLY: The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T). ADJ. GLIDES: The adj. glide is injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface. Approved Furniture Make - Godrej |
| 48 | Providing And Placing of 3 Seater Premium lounge Chair Cushioned for Waiting Rooms : size: W 1640 mm X D 700 mm X H 785 mm, Seat height: 435 mm, SIDE FRAME ASSEMBLY: The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The ends are fitted with ABS moulded end caps. TIE MEMBER: It is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. The tie-member is made of MS. E.R.W. tube dia.3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The seat/back assemblies are mounted on one of the tie- member which has 5cm x 5.5cm long x 0.5cm. thk MS. Std. angles welded to mount the seat and back. SEATREST ASSEMBLY: The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover. SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T). BACKREST ASSEMBLY: The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T). ADJ. GLIDES: The adj. glide is injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface. Approved Furniture Make - Godrej |
| 49 | Providing And Placing of Revolving Mid back Chair : 1. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with changeable fabric upholstery covers and moulded Polyurethane Foam, together with moulded back spine covers. The back foam is designed with contoured lumber support for extra comfort. BACK SIZE: 45.0cm.(W) X 53.0cm.(H), SEAT SIZE: 52.0cm.(W) X 48.0cm.(D). 2. POLYURETHANE FOAM: The polyurethane foam is moulded with density = 45 ± 2 kg/m^ and Hardness = 20 ± 2 on Hampden machine at 25% compression. 3. SEAT/BACK SPINE COVERS:The back-spine cover is injection moulded in black Co-polymer Polypropylene. The seat is covered on the underside with black Polypropylene non-woven fabric. 4. ARMREST (FIXED):The one-piece armrests are made of black integral skin polyurethane reinforced with M.S. insert with 50-70 Shore 'A' hardness. The armrests are scratch and weather resistant. The armrest are fitted to the seat with armrest brackets made of 0.5 ± 0.05 cm. thk. HR steel. 5. PERMANENT CONTACT MECHANISM: The permanent contact mechanism is designed with the following features: • 360° revolving type. • 14° ±2°maximum back-tilt only.• Upright position locking. • Tilt tension adjustment. 6. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 7. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. 8. PEDESTAL ASSY: The pedestal is fabricated from 0.2 ± 0.02 cm thick HR sheet (IS : DD 1079 / HR ), powder coated ( DFT 40-60 microns ) and fitted with an injection moulded black Polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 60.0 ±0.5cm. pitch-centre dia. (70.0±1.0cm. with castors). 9. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon Approved Furniture Make - Godrej l (Greenguard Assurance Certified Prod.) Design as approved by Engineer-In-charge. |
| 50 | Providing And Placing of Premium Executive Very High Back Chair : SEAT WITH ARMREST ASSEMBLY - The seat assembly consists of 15 mm thick molded plywood,layered with acombination of PU foam of 45 kg/m³ density and slab stock foam of28 kg/m³density. This sub-assembly is then upholstered with aleatherette cover.ARMRESTASSEMBLY:The armrest assembly is made of 18mm thick dualplywood, surrounded by slab stock foam with adensity of 60 kg/m³.The plywood and slab stock foam sub-assembly s then wrapped in a 30 GSM non-woven cover,and the entire sub-assembly is upholstered with a leatherette armrest cover. CENTER TILT WITHMULTIPOSITIONLOCK MECHANISM : The mechanism is designed with the following features : 60°revolving type, 3 position locking,Tilt tension adjustment. PN E U MATIC HE IG HT ADJUSTMENT the pneumatic height adjustment has a stroke of 10.0±0.3cm. PEDESTAL:The pedestal is made of die-cast aluminium with a buffed finish. It is fitted ith 5 nos. twin wheel castor.The pedestal has a 75.0±0.5cm pitch-center dia TWIN WHEEL CASTOR:5 Nos. twin wheel soft castors,which are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel diameter and assembled to the buffed pedestal. Size in mm - 808W x 886D x 850 - 1000H, 560 SH. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge |
| 51 | Providing And Placing of L - Shaped Reception Table : Work Surface to be Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap along with a Gromett is provided on work surface for wire management. Wire Management : Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma) which is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure to be Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping Understructure. TOP shelf : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit. Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard, Handle to be provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Overall size - 2400W x 1770D x 1080H mm. Approved Furniture Make - Godrej l (Greenguard Assurance Certified Prod.) Design as approved by Engineer-In-charge |
| 52 | Providing And Placing of Shoe Cabinet : Overall Size : Width : 50cm Depth : 14cm Height : 110.8cmBody: Aesthetically appealing plain, made from combination of CRCA 0.6 mm & 0.8 mm Thickness. construction: Assembled.Finish: Epoxy Powder coated.Hardware: High quality standard hardware like screws, rivets, bushes, bangers, washers, etc.Door & Locking: Combination door opening. Common Cam lock fitted to the topmost compartment door.Carton: One packet.. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 53 | Providing And Placing of DINING Chair : Overall Size :Dining Chair :Length : 45cm Width : 45cm Height : 95cm Cushion Seat : Length : 45cm Width : 45cm Height : 50cm METAL MATERIALS : (gauge +/- 0.1mm):Material:NUT & WASHER WOODEN MATERIALS :Material:SHEESHAM SOLID WOOD . Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 54 | Providing And Placing of 6 SEATER MARBEL TOP FINISH DINING TABLE : Overall Size : Length : 1600mm Width : 900mm Height : 770mm METAL MATERIALS : (gauge +/- 0.1mm):Material:BOLT & WASHER,WOODEN MATERIALS :Material:SHEESHAM SOLID WOOD , COLOR:Metal part Color:Black. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 55 | Providing And Placing of 3 Seater Lounge Chair : The Seat and Back are made up of injection moulded high impact strength Polypropylene polymer compound with indoor grade UV resistance. SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D), BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H).The powder coated ( DFT 50±10 microns ) welded Beam M.S. Structure is to be made from 5.08 ± 0.03 cm x 5.08 ± 0.03 cm x 0.16 x 0.0128 cm. The 0.315 ± 0.008 cm thk HR steel plate is welded to beam for fixing seat and back frame. The powder coated ( DFT 50±10 microns ) welded Leg M.S. Structure is made from 5.08 ± 0.03 cm X 5.08 ± 0.03 cm x 0.16 x 0.0128 cm and 5.08 ± 0.03 cm x 2.45 ± 0.03 cm x 0.16 ± 0.0128 cm. Shoe - The shoes are to be made of high impact strength PolyPropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. Size - 1784 W x 563 D x 840 H mm. Seat Height 452 mm. Approved Furniture Make - Godrej (Greenguard GOLD/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 56 | Providing and Placing of Premium Executive Bed Side Table: It should be of Size 450 x 500 x 495 (mm) A Set of Premium Bedside Tables along side the Bed give it a Majestic Look! An openable door (both LH and RH) and a pull-out drawer allow access to ample of storage along side the bed for small utility items. Approved Furniture Make - Godrej(Greenguard/BIFMA Certified Co.). Design as approved by Engineer-In-charge. |
| 57 | Providing And Placing of Center Table : Centre Table consist of under frame made of engineered wood and top is of of tinted toughened glass. The matching curved leg evokes a premium look which adds to the aesthetics. Load bearing capacity : 30 Kg overall dimensions 1000W x 450D x 400H: Approved Furniture Make - Godrej l (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 58 | Providing And Placing of Center Table : Centre Table consist of under frame made of rubber wood and top is of high density plywood. The top of both the tables are 24 mm thick and have a higher load bearing capacity than glass top. The matching curved leg evokes a premium look which adds to the aesthetics. Load bearing capacity : 30 Kg overall dimensions 1200W x 600D x 430H: Approved Furniture Make - Godrej l (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. |
| 59 | Providing And Placing of APO Executive High Back Chair : The seat should be made of Injection molded Plastic outer & Inner. Plastic Inner should be upholstered with leatheritte and moulded High Resilience Polyurethane foam of Density 45 +/- 2 kg/m3, and hardness load 16 +/- 2 kgf as per IS: 7888 for 25% compression. overall Size : 74.1 cm (W) x 74.1 cm (D) x 114.0- 121.5 cm (H). The back should be made of Polyurethane foam with insitu molded MS E.R.W. Round Tube of size 1.9 +/- 0.03cm x 0.16 +/- 0.0128 cm. Back is upholstered with pure leather. ARMRESTS: The armrest top should be moulded from polyurethane upholstered in pure leather and mounted on to a drop lift adjustable type of tubular armrest support made of dia. 3.81 +/- 0.03 cm x 0.2 +/- 0.01 cm thk M.S. E.R.W. tube having chrome plated finish. The armrest should be hight adjustable up to 6.5 +/- 0.5 cm in 5 steps. MECHANISM: The Active Bio- Synchro Mechanism should be designed with the following features: 360° revolving type, front - pivot for tilt with feet resting on the ground and continuous lumbar support, Tilt tension adjustment should be operated in seating position, 5- position Tilt limiter giving option of variable tilt angle to tht chair, Seat/ back tilting ratio of 1:2, the mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0 +/- 0.5 cm. ADJUSTABLE BACK SUPPORT: Back frame should be connected to the Up/ Down mechanism housed in Plastic T spine. It sould be adjustable in the range of 7.42 +/- 0.5 cm for the comfortable back support tot suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment should be and adjustment stroke of 10.0 +/- 0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High pressure Die cast polished Aluminium and fitted with 4 nos. twin wheel castors. The pedestal is 65.0 +/-0.5 cm. pitch - center dia. (75.0 +/- 1.0 cm. with castors.) TWIN WHEEL CASTOR: 5 Nos. twin wheel castors should be injection moulded in plastic having 6.0 +/- 0.1 cm wheel Diameter and assembled to pedestal. Approved Furniture Make - GODREJCII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD Certified Product,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. |
| 60 | Providing And Placing of Executive Mid Back Chair : The seat should be made of Injection molded Plastic outer & Inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience Polyurethane foam of Density 45 +/- 2 kg/m3, and hardness load 16 +/- 2 kgf as per IS: 7888 for 25% compression. overall Size : 76.1 cm (W) x 76.1 cm (D) x 96.5 -114.0 cm (H). The back should be made of Polyurethane foam with insitu molded MS E.R.W. Round Tube of size 1.9 +/- 0.03cm x 0.16 +/- 0.0128 cm. Back is upholstered with pure leather. ARMRESTS: The armrest top should be moulded from polyurethane upholstered in pure leather and mounted on to a drop lift adjustable type of tubular armrest support made of dia. 3.81 +/- 0.03 cm x 0.2 +/- 0.01 cm thk M.S. E.R.W. tube having chrome plated finish. The armrest should be hight adjustable up to 6.5 +/- 0.5 cm in 5 steps. MECHANISM: The Active Bio- Synchro Mechanism should be designed with the following features: 360° revolving type, front - pivot for tilt with feet resting on the ground and continuous lumbar support, Tilt tension adjustment should be operated in seating position, 5- position Tilt limiter giving option of variable tilt angle to tht chair, Seat/ back tilting ratio of 1:2, the mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0 +/- 0.5 cm. ADJUSTABLE BACK SUPPORT: Back frame should be connected to the Up/ Down mechanism housed in Plastic T spine. It sould be adjustable in the range of 7.42 +/- 0.5 cm for the comfortable back support tot suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment should be and adjustment stroke of 10.0 +/- 0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 +/-0.5 cm. pitch - center dia. (75.0 +/- 1.0 cm. with castors.) TWIN WHEEL CASTOR: 5 Nos. twin wheel castors should be injection moulded in plastic having 6.0 +/- 0.1 cm wheel Diameter and assembled to pedestal. Approved Furniture Make - Godrej (CII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD Certified Product,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. |
| 61 | Providing And Placing of Executive Visitor Chair : The seat should be made of Injection molded Plastic outer & Inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience Polyurethane foam of Density 45 +/- 2 kg/m3, and hardness load 16 +/- 2 kgf as per IS: 7888 for 25% compression. Overall Size : 60.9 cm (W) x 64.7 cm (D) x 98.2 cm (H). The back should be made of Polyurethane foam with insitu molded MS E.R.W. Round Tube of size 1.9 +/- 0.03cm x 0.16 +/- 0.0128 cm. Back is upholstered with pure leather. ARMRESTS: The armrest top should be moulded from polyurethane tubular armrest support made of M.S. E.R.W. tube having chrome plated finish. TUBULAR FRAME: The tubular frame should be cantilever type & made of dia 2.54 +/- 0.03 cm x 0.2 +/- 0.016 cm thk S.S. 202 tube. The back connected to frame through chrome plated high pressure die cast connector piece. Approved Furniture Make- Godrej (CII GREENPRO, UL GREENGUARD,GRIHA, SCS INDOOR ADVANTAGE GOLD Certified Product,ISO 13485:2016, ISO 45001:2018, ISO 9001:2015, ISO14001:2015 Certified Co.) Design as approved by Engineer-In-charge. TOTAL 10510000.0 NOTE:- GST SHALL BE PAID EXTRA AS PER GOVERNMENT PRIVILEGE RATES |
| 62 | Providing and placing of furniture items for M. P. Private university near Kaliasot Dam Bhopal. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
