|
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.50 M (5ft) and lead up to 30 M (100 ft) and including filling watering and ramming of excavated earth in to the trenches or into the space between the building and the sides of doundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer incharge upto a distance of 30 m (100 fts) from the foundation trenches. Including all T&P Fowara and Basket as per Sl No. 251 |
| 2 | E/W Filling wih 5km cartage including ramming and dressing as per direction of EI. |
| 3 | Providing and laying in cement concrete 1:4:8 (1cement:4coarse sand:8 grades brick ballast 40mm, nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation as per Sl No. (281) |
| 4 | 1st class 150 brick work in 1:4 cement in foundaion & plinth, including supply of all materials, labour and tools & plant etc.required for proper completion of the work. Sl. 305a |
| 5 | 2cm. (3/4\\") thick damp proof coarse with cement and approved coarse sand 1:2 with and including water proofing material as ordered by the Engineer incharge in the proportion as specified by the manufatures, including supply of all materials, labour and T&P etc. required for proper completion of the work and including proper curing and shuttering as necessary. |
| 6 | R.C.C. Work in slab using 1:1.5:3 as per SOR PWD 284B |
| 7 | S/F Flush Doors commercial quality 35mm thick conforming to I.S. mark includig fixing of wooden cleats & stoppers and including fixing and adjustment of hinges bolts locks, handles springs. Fitting with necessary screws to be supplied departmentally. Sl. No. 470(b) |
| 8 | Mild steel or iron work in heavy size such as trusses build up gates record racks roof work gates etc wrought to required from including drilling holes riverting or welding where necessary and their fixing required for proper completion of the work. Sl. No. 503 |
| 9 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in overall rates) brought to required shapes as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured upto floor two level as per Sl No. 504 (6mm to 32 mm torbar) SOR PWD-504 |
| 10 | 12 mm cement plaster in 1:4 cement and fine sand including coast of all material labour and T&P etc. complite Sl. No. 586 |
| 11 | Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with wate absorption less than 0.08% and conforming to 15:15622, of approved brand & manufacturer, in all colour and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) jointing with grey cement [email protected] kg/sqm including grouting the joints with white cement and matching pgments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and ruber mallet for placing the tiles gently and easily. 11.41 A.1 Double charge vitrified tile polished finish of size. |
| 12 | Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat or approved superior ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No.103 1950 SOR Sch-641 |
| 13 | Finishing wall with two coat of water proof cement paint of approved quality on previously old painted surface with this paint to give an even shade. Including supply of all material, labour and T&P etc required for proper completion of thw work. Sl No. 660+661 Chp-15 |
| 14 | Distempring two coat oil distemper with primer on new surface and second coat also after first coat indlucing cost of all material labour T&P etc, complite Sl. No. 649, 650 |
| 15 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 16 | Supplying & fixing of 4 mm thick glasspanes for window shutter including supply of putty, brand & springs all materials, labour T&P etc. required for proper completion of work. |
| 17 | Providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer incharge. Polished Granite stone slab of colour black, Cheny/Ruby Red or equivalent DSR 11.56.1 |
| 18 | S/F of kitchen sink |
| 19 | All plumbing work including L bow T and sulation pipe etc all completed. |
| 20 | All Electric work including connection of light, bulb wire etc complete. |
| 21 | Part (A) Civil Work :E/w excavation in foundation in ordinary soil as per S.l. No. 253 |
| 22 | Filling of sand under floor including watering, ramming, consolidation and dressing complete. (Chapter 1, Sr no-9) |
| 23 | P/L.C.C. in 1:4:8 in foundation with cement fine sand & 40 mm guage b/ballast as per S.l. No. 275. |
| 24 | 2 cm thick D.P.C. with cement and approved coarse 1:2 with and including wate proofing materials as ordered by the Engineer in charges (Sl. No.-360) |
| 25 | M-150 B/w in 1:4 cement & c/sand mortar etc all cost complete as per S.l. No. 305(b) |
| 26 | Plaster work i 1:4 cement & c/sand mortar etc as per S.l. No.-583 |
| 27 | Scraping on the old plaster and flooring including finishing of surface. |
| 28 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the maufacturer) with water absorption less than 0.08% and conforming to 15:15622, of approved brand & maufacturer, in all colour and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement [email protected] kg/sqm including grounting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the ntch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.1 Double charge vitrified tile polishd finish of size. |
| 29 | Finishing of wall with water proof cement paint in three coat etc as per S.l. No.-660+661 |
| 30 | Supply & fixing squatting plate patter urinal of size 600mmx350mm with integral longitudinal flush pipe |
| 31 | Supply & fixing 110mm dia pvc pipe |
| 32 | All plumbing work including L bow T and sulation pipe etc all completed. Please Enable Macros to View BoQ information |
