|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each and removing from site complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each and removing from site complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and removing from site complete all as specified and as directed. |
| 4 | S&F 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile (as per IS : 1003 part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 5 | S&F 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed. |
| 6 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 7 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 8 | S&F pressed steel door frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed. |
| 9 | S&F factory made 30 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed. Note: (a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE. (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site. |
| 10 | S&F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-charge.Note: (a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE.(b)Test certificate from original Manufactuer shall be provided before incorporation in the work site. |
| 11 | S&F powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed/Glass and one shutter wire mesh) with following specification complete all as specified and as directed by Engineer-in-charge.(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm (iii) Sliding shutter frame of cross section 40 x 18mm(iv) 4 mm thick glass superior quality. (Min)(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos. (Min)(vii) Sliding rollers per shutter - 02 Nos. (Min)(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. Note: (a)Thickness of Aluminium Section shall be minimum 2 to 3mm (Final Thickness and Cross Section of Aluminium section of higher size without any extra cost shall be approved Engineer in Charge as per Site requirement. (b) Drawing /size of window shall be provided by Engineer in Charge during execution of work as per site requirement. |
| 12 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 13 | S&F powder coated aluminum door with the following specification and making good the adjacent surfaces, complete all as specified and as directed.(a) Cross section of chowkhat frame 101.60x44.45mm(b) Cross section of hanging and meeting style 83x44mm(c) Top rail of cross section 114x44mm(d) Bottom rail of cross section 114x44 mm (e) Locking rail (middle rail) of cross section 83x44 mm(f) 4 mm thick glass superior quality. (Min)(g) Aluminum handle eisc type -02 Nos per shutter (inside & out side).(h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside).(j) Concealed Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. Note: (a)Thickness of Aluminium Section shall be minimum 2 to 3mm (Final Thickness and Cross Section of Aluminium section of higher size without any extra cost shall be approved Engineer in Charge as per Site requirement. (b) Drawing /size of window shall be provided by Engineer in Charge during execution of work as per site requirement. |
| 14 | S&F in repairs stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 15 | S&F in repairs 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete including Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or stone etc complete all as specified and as directed. |
| 16 | S&F 100 mm Butt hinges medium weight cold rolled SS and fixed complete all as specified and directed. |
| 17 | S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed. |
| 18 | S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. . |
| 19 | S&F in repairs 200 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt sliding bolts of extruded section complete all as specified and directed. |
| 20 | Taking down existing aluminium Door/window shutters of any size and carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc and also carry out repalcement of broken wire mesh and glass panes wherever necessary and refixing the shutter in the same opening complete all as specified and directed.Note: Wire mesh and glass pane & Aluminium frame if required shall be measured and paid separatly. |
| 21 | S&F fabricating anodised aluminium frame work, door shutter, windows , ventilators, partishions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed. |
| 22 | S&F aluminium coloured powder coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed. |
| 23 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 24 | S&F in repairs aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed. |
| 25 | S&F in repairs double action floor spring for aluminium & toughned glass hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 26 | S&F in repairs 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed. |
| 27 | S&F in repairs Ply board hardwood 2nd class,clean sawn, plain,12-18mm thick, feather edged cut as required to cut to shape and fixed complete all as specified and directed. |
| 28 | S&F 1mm thick sunmica coloured/design/texure of decorative laminated layer that is placed on top of wood/ply boards with adhessives as per manufactured instructions and as directed by Eng-in-charge. |
| 29 | S&F factory made PVC shelf/partition of required size consisting of panel of 18 mm thick celuka PVC ply having prelaminated one side on it of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. complete all as specified and directed. Note: Design,Size,Colour and Texture of PVC ply shall be approved by Engineer in charge. |
| 30 | S&F in repairs 25 mm dia of anodised aluminium alloy, chromium plated drappery curtain rod with fixing bracket complete all as specified and directed. Please Enable Macros to View BoQ information |
| 31 | S&F in repairs 25 mm dia of anodised aluminium alloy, chromium plated drappery curtain rod with fixing bracket complete all as specified and directed. Please Enable Macros to View BoQ information |
