|
| 1 | Please Enable Macros to View BoQ information |
| 2 | Demolition of cement concrete (unreinforced) in any position complete all as specified and directed. |
| 3 | M&L 25 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) is used base, sub base, floor complete all as specified and directed. |
| 4 | M & L cement plaster 10mm thick in Cement mortar 1:3 finishing surface even and smooth including mixing with water proofing compound complete all as specified and directed. |
| 5 | M & L applying evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including removing existing membrane, cleaning of surfaces and applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/ Sqm) on primed surfaces by forced applications including two coats of aluminium paint complete all as specified and directed. |
| 6 | Supply only water proofing compound complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as specified and directed. |
| 8 | M&L rendering 15 mm thick in CM 1:6 on brick work/ stone work or concrete surface work finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | Description all as per item No 7 here-in-above but 5mm thick in CM 1:3 on ceiling,chajja,roof projection etc.complete all as specified and directed. |
| 10 | M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work/ stone work or concrete surfaces mixed with WPC as per manufacturer instruction , and finished the surface fair and even complete all as specified and directed. |
| 11 | M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1 to 2 mm thick white cement based wall care putty complete all as specified and directed. |
| 12 | M & L newly plasterered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 13 | M&L preparing of newly plastered wall surface and & applying two coats of cement base paint over a coat of alkaline resistant primer complete all as specified and directed. |
| 14 | Taking down old 20 mm dia pipe and connection including cleaning for re fixing stacking at site complete all as specified and directed.. |
| 15 | Description all as per srl item No 15 here-in-before but 25 mm bore of pipe complete all as specified and as directed. |
| 16 | Description all as per srl item No 15 here-in-before but 32 mm bore of pipe complete all as specified and as directed. |
| 17 | S&F CPVC pipe SDR II having outer dia 20 mm pipe with plain CPVC SDR II fitting such as bends, elbows, unions and end pieces to receive the fittings and fixed with solvent cement in walls/ceilings (concealed/surface) or laying in floors complete all as specified and directed. |
| 18 | Description all as per srl Item No.18 here-in-before, but 25 mm outer dia pipe complete all as specified and as directed. |
| 19 | Description all as per srl Item No.18 here-in-before, but 32 mm outer dia pipe complete all as specified and as directed. |
| 20 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 21 | M&L 75mm thick cement concrete type C-2 1:3:6 (using 20mm graded stone aggregate) used for cement concrete in sub floors, sub base, floors and pavings etc. complete all as specified and as directed. |
| 22 | M&L 75mm thick cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) used for plinth protection complete all as specified and as directed. |
| 23 | Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MOD land complete all as specified and directed. |
| 24 | M&L non skid ceramic colored tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 25 | M&L non skid ceramic colored tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
