|
| 1 | Periodic Renewal of (i) DD road to Tereh village (Constructed under PMGSY Package No.AS1801 ) (ii) DD road to Wasubil (Constructed under PMGSY Package No. AS1812) (iii) DD road to Borowashiling village (Constructed under PMGSY Package No. AS1801) (iv)DD road to Chotowashiling (Constructed under PMGSY Package No.AS1812) For the year 2025-26, Dima Hasao District |
| 2 | (i) DD road to Tereh village (Constructed under PMGSY Package No.AS1801 ): Clearingand Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(i). (a) In area of non thorny jungle. |
| 3 | Removal of Unsuitable Soil with Disposal upto 1000 mRemoval of unsuitable soil includingexcavation, loading and disposal upto 1000m lead but excluding compaction ground supporting embankment subgradereplacement by suitable soil, which shall be paid separately as per Clause303.5.2 as per Technical Specification Clause 302.3.11 |
| 4 | Surface drain is soil.Construction of unlined surface drains of average cross-sectional area 0.40 sqmin soil to specified lines, grades, levels and dimensions. Excavated material to beused in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) asper Technical Specification Clause 307 |
| 5 | Maintenance of Earthen shoulder (filling with fresh selected soil)Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause1903. |
| 6 | 3). WBM Grading 3.Using stone screening Type - B 11.2 mm for Gr - IIProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80 - 100 KN stetic roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading 3 as per specification clause 405. (A). By Manual Means. |
| 7 | Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.(ii). Medium porosity. |
| 8 | Tack Coat.Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 9 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder.Providing, laying and rolling of open-graded premix carpet of 20 mm thichness composed of 13.2 mm to 5,.6 mm ggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80- 100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per tachnical specification clause 508. |
| 10 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid tothe specified levels, grade and cross fall using Type A, Type B and Type C asper Technical Specification Clause 510A. Manual means.Case - I : Type A(i). Bitumen (S-90) |
| 11 | (ii) DD road to Wasubil (Constructed under PMGSY Package No. AS1812) : Clearingand Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(i). (a) In area of non thorny jungle. |
| 12 | Removal of Unsuitable Soil with Disposal upto 1000 mRemoval of unsuitable soil includingexcavation, loading and disposal upto 1000m lead but excluding compaction ground supporting embankment subgradereplacement by suitable soil, which shall be paid separately as per Clause303.5.2 as per Technical Specification Clause 302.3.11 |
| 13 | Surface drain is soil.Construction of unlined surface drains of average cross-sectional area 0.40 sqmin soil to specified lines, grades, levels and dimensions. Excavated material to beused in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) asper Technical Specification Clause 307 |
| 14 | Maintenance of Earthen shoulder (filling with fresh selected soil)Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause1903. |
| 15 | 3). WBM Grading 3.Using stone screening Type - B 11.2 mm for Gr - IIProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80 - 100 KN stetic roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading 3 as per specification clause 405. (A). By Manual Means. |
| 16 | Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.(ii). Medium porosity. |
| 17 | Tack Coat.Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 18 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder.Providing, laying and rolling of open-graded premix carpet of 20 mm thichness composed of 13.2 mm to 5,.6 mm ggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80- 100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per tachnical specification clause 508. |
| 19 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid tothe specified levels, grade and cross fall using Type A, Type B and Type C asper Technical Specification Clause 510A. Manual means.Case - I : Type A(i). Bitumen (S-90) |
| 20 | (iii) DD road to Borowashiling village (Constructed under PMGSY Package No. AS1801): Clearingand Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(i). (a) In area of non thorny jungle. |
| 21 | Surface drain is soil.Construction of unlined surface drains of average cross-sectional area 0.40 sqmin soil to specified lines, grades, levels and dimensions. Excavated material to beused in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) asper Technical Specification Clause 307 |
| 22 | Maintenance of Earthen shoulder (filling with fresh selected soil)Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause1903. |
| 23 | 3). WBM Grading 3.Using stone screening Type - B 11.2 mm for Gr - IIProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80 - 100 KN stetic roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading 3 as per specification clause 405. (A). By Manual Means. |
| 24 | Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.(ii). Medium porosity. |
| 25 | Tack Coat.Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 26 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder.Providing, laying and rolling of open-graded premix carpet of 20 mm thichness composed of 13.2 mm to 5,.6 mm ggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80- 100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per tachnical specification clause 508. |
| 27 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid tothe specified levels, grade and cross fall using Type A, Type B and Type C asper Technical Specification Clause 510A. Manual means.Case - I : Type A(i). Bitumen (S-90) |
| 28 | (iv)DD road to Chotowashiling (Constructed under PMGSY Package No.AS1812) : Clearingand Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(i). (a) In area of non thorny jungle. |
| 29 | Surface drain is soil.Construction of unlined surface drains of average cross-sectional area 0.40 sqmin soil to specified lines, grades, levels and dimensions. Excavated material to beused in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) asper Technical Specification Clause 307 |
| 30 | Maintenance of Earthen shoulder (filling with fresh selected soil)Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause1903. |
| 31 | 3). WBM Grading 3.Using stone screening Type - B 11.2 mm for Gr - IIProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80 - 100 KN stetic roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading 3 as per specification clause 405. (A). By Manual Means. |
| 32 | Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.(ii). Medium porosity. |
| 33 | Tack Coat.Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 34 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder.Providing, laying and rolling of open-graded premix carpet of 20 mm thichness composed of 13.2 mm to 5,.6 mm ggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80- 100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per tachnical specification clause 508. |
| 35 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid tothe specified levels, grade and cross fall using Type A, Type B and Type C asper Technical Specification Clause 510A. Manual means.Case - I : Type A(i). Bitumen (S-90) Please Enable Macros to View BoQ information |
