|
| 1 | LOCKER BED SIDE STEEL , FD-1029:Removal of existing unserviceable handle and S&F Stainless steel handle for shutters of size 100mm long for 'Locker bed side steel' as per sample approved by Engg-in-Charge as per drg and directed by Engg-in-Charge. |
| 2 | LOCKER BED SIDE STEEL , FD-1029 : Removing the existing unserviceable Clamp/stud and S&F Clamp shaped stud made out of 1mm thick sheet of size 75x80mm duly shaped for holding hinges/shutter as per drg and directed by Engg-in-Charge. |
| 3 | LOCKER BED SIDE STEEL , FD-1029: Removing the existing unserviceable hasp and staple and supply and fix Stainless steel hasp and staple of size 75mmx40mmx3mm as per sample approved by Engg-in-Charge as per drg and directed by Engg-in-Charge. |
| 4 | LOCKER BED SIDE STEEL , FD-1029: Removing the existing damaged/unsv bottom legs and supply and fix new bottom legs to locker bed side steel made out of 1mm thick mild steel sheet as per drg and directed by Engg-in-Charge. |
| 5 | LOCKER BED SIDE STEEL , FD-1029: Removing the existing unsv conduit pipe and supply and fix new 20mm dia stainless steel conduit pipe, 1.6 mm thick in the locker bedside steel as per drg and directed by Engg-in-Charge. |
| 6 | LOCKER BED SIDE STEEL , FD-1029: Removing the existing sockets for conduit pipe and supply and fix 20mm dia steel sockets to hold conduit pipe as per drg and directed by Engg-in-Charge. |
| 7 | LOCKER BED SIDE STEEL , FD-1029: Removing the existing unserviceable/broken shelf and supply and fix shelf of size 530mmx370mm x 1mm thick mild steel sheet of locker bed side steel as per drg and directed by Engg-in-Charge. |
| 8 | LOCKER BED SIDE STEEL , FD-1029: Removing the existing unserviceable broken Shutter and supply and fix new shutter made out of mild steel sheet 1 mm thick as per drg and directed by Engg-in-Charge. |
| 9 | LOCKER BED SIDE STEEL , FD-1029: M&L Preparation of old painted steel surfaces of locker bed side steel internally and externally duly welding/denting to all places of locker wherever required and applying two coats of synthetic enamel paint over a coat of red oxide primer with spray machine to entire old/new surfaces internally & externally complete all as directed by Engg in charge |
| 10 | TABLE DINING ORs FD-165:Removing the existing unserviceable damaged table top with aluminium sheet from the table and supply & fix table top of size 1900mm x 685 mm made up of 18 mm thick plywood BWR Gde , ISI marked Make Kitply/ Century ply/ Green Ply covered with 22 gauge aluminium sheet complete as per drg and directed by Engg-in-Charge. |
| 11 | TABLE DINING ORs FD-165: Removing the existing unserviceable damaged MS square pipe long rail and supply & fix 25mmx25mm MS square pipe of 16 gauge long rail by welding and applying two coats of synthetic enamel paint (colour as directed ) over one coat of primer as per drg and directed by Engg-in-Charge. Make of MS Pipe : Jindal/ TATA/ Zenith |
| 12 | TABLE DINING ORs FD-165: Removing the existing unserviceable damaged MS square pipe short rail and supply & fix 25mmx25mm MS square pipe of 16 gauge short rail by welding and applying two coats of synthetic enamel paint (colour as directed ) over one coat of primer complete as per drg and directed by Engg-in-Charge. Make of MS Pipe : Jindal/ TATA/ Zenith |
| 13 | TABLE DINING ORs FD-165: M&L Preparing the old steel surfaces of table dining ORs and applying one coat of synthetic enamel paint of approved colour with machine spray complete all as specified and as directed. |
| 14 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285: Removing the existing unserviceable /broken rear leg and S&F New teak wood rear leg of size 55 x 30mm as per drg and directed by Engg-in-Charge. |
| 15 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285: Removing the existing unserviceable/ broken front leg and S&F New teak wood front leg of size 30mm x 55mm as per drg and directed by Engg-in-Charge. |
| 16 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285: Removing the existing unserviceable/broken back rail S&F New teak wood back rail of size 50mm x 35mm as per drg and directed by Engg-in-Charge. |
| 17 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285: Removing the existing unserviceable/broken front rail of seat frame and S&F New teak wood front rail of size 30mm x 65mm of seat frame as per drg and directed by Engg-in-Charge. |
| 18 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285. Removing the existing unserviceable/broken seat plank and S&F 6mm thick ply wood seat plank of including drilling holes as per drg and directed by Engg-in-Charge. Make: Kitply/ Century ply/ Green Ply |
| 19 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285. Removing the existing unserviceable/broken stiffener and S&F New teak wood stiffener of size 20mm x 25mm as per drg and directed by Engg-in-Charge. |
| 20 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285: Removing the existing unserviceable/ broken back rest frame S&F New teak wood back rest of size 50 x 15 mm to the back frame as per drg and directed by Engg-in-Charge. |
| 21 | CHAIR WOODEN BOTTOM FD-55,FD-225 & FD-285: M&L Polishing to repaired chairs duly preparing the old and new surfaces and including providing hard rubber ring screwed to the legs complete all as specified and shown on drawing and as directed. |
| 22 | CHAIR VERANDAH FD-19(m), 259,256: Removing Old unserviceable Cane from Chair and Re-canning seat & back of chair verandah with plastic cane 4mm wide make: Shah/ premier/ Marcane/ Maharastra co; white colour in matt pattern as per drg and directed by Engg-in-Charge. |
| 23 | CHAIR VERANDAH FD-19(m), 259,256: M&L Preparation of old painted surface of Chair Verandah by scraping, denting, derusting etc and applying one coat of synthetic enamel paint (White in colour) by spray painting to Chair Verandah complete as directed by Engr-in-charge . |
| 24 | CHAIR VERANDAH FD-19(m), 259,256: Removing old unserviceable MS rod and S&F New MS Rod of 10mm dia ,460mm long with gas welding duly painted with white synthetic enamel paint after pre treated with steel primer as per drg and directed by Engg-in-Charge. |
| 25 | CHAIR VERANDAH FD-19(m), 259,256: Removing unserviceable MS rod 10 mm dia, 460 mm long and Refixing of the same with gas welding duly painted with white synthetic enamel paint as per drg and directed by Engg-in-Charge. |
| 26 | CHAIR VERANDAH FD-19(m), 259,256: Cutting and removing unserviceable legs of chair verandah and S&F new leg portion of MS tube 16 gauge 1.6mm thick fixing with gas welding as per drg and directed by Engg-in-Charge. |
| 27 | CHAIR VERANDAH FD-19(m), 259,256: Removing old unsv PVC Toe of Chair Verandah and S&F New PVC Toe of best quality as per sample approved for bottom of the legs of Chair verandah as per drg and directed by Engg-in-Charge. |
| 28 | Chair Dining FD-16(M), 279, 228 : Removal of old unsv Font Legs of Chair Dining and S&F New seasoned teak wood Font Legs with exact dimensions as per drg and directed by Engg-in-Charge. |
| 29 | Chair Dining FD-16(M), 279, 228 : M&L for removal of old unsv rear Legs of Chair Dining and S&F New seasoned teak rear Legs with exact dimensions as per drg and directed by Engg-in-Charge. |
| 30 | Chair Dining FD-16(M), 279, 228 : Removal of old unsv side rail of Chair Dining and S&F New seasoned teak side rail with exact dimensions as per drg and directed by Engg-in-Charge. |
| 31 | Chair Dining FD-16(M), 279, 228 : Removal of old unsv front rails of Chair Dining and S&F New seasoned teak front rails with exact dimensions as per drg and directed by Engg-in-Charge. |
| 32 | Chair Dining FD-16(M), 279, 228 : Removal of old unsv back rails of Chair Dining and S&F New seasoned teak back rails with exact dimensions as per drg and directed by Engg-in-Charge. |
| 33 | Chair Dining FD-16(M), 279, 228: Removal of old unsv back rest of Chair Dining and S&F New seasoned teak back rest with exact dimensions as per drg and directed by Engg-in-Charge. |
| 34 | Chair Dining FD-16(M), 279, 228: Removal of old unsv bottom stiffner of Chair Dining and S&F New seasoned teak bottom stiffner with exact dimensions as per drg and directed by Engg-in-Charge. |
| 35 | Remove old unsv PVC shoes and S&F New PVC shoes of best quality with 1/2\\" screw to the bottom of legs of Chair dining as per drg and directed by Engg-in-Charge. . |
| 36 | Removing Old unserviceable Cane From Chair dining and M&L Re-canning with 2mm wide plastic cane in Godrej pattern and 4 mm plastic cane for Parameter work (borders ); in white colour complete all as Specified and directed by Eng-in Charge. Make: Shah/Premier/ Marcane/ Maharashtra Co. |
| 37 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv Font Legs of CHAIR WRITING and S&F New seasoned teak wood Font Legs with exact dimensions s per drg and directed by Engg-in-Charge. |
| 38 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv rear Legs of CHAIR WRITING and S&F New seasoned teak rear Legs with exact dimensions s per drg and directed by Engg-in-Charge. |
| 39 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv side rail of CHAIR WRITING and S&F New seasoned teak side rail with exact dimensions s per drg and directed by Engg-in-Charge. |
| 40 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv front rails of CHAIR WRITING and S&F New seasoned teak front rails with exact dimensions as per drg and directed by Engg-in-Charge. |
| 41 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv back rails of CHAIR WRITING and S&F New seasoned teak back rails with exact dimensions as per drg and directed by Engg-in-Charge. |
| 42 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv back rest of CHAIR WRITING and S&F New seasoned teak back rest with exact dimensions as per drg and directed by Engg-in-Charge. |
| 43 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv bottom stiffner of CHAIR WRITING and S&F New seasoned teak bottom stiffner with exact dimensions as per drg and directed by Engg-in-Charge. |
| 44 | CHAIR WRITING FD-20(m) , 250, 280 : Removal of old unsv Arms of Chair writing and S&F New seasoned teak Arms with exact dimensions as per drg and directed by Engg-in-Charge. |
| 45 | Remove old unsv PVC shoe and S&F New PVCshoe of 25\\" dia of best quality with 1/2\\" screw to the bottom of legs of Chair writing as per drg and directed by Engg-in-Charge. |
| 46 | Removing Old unserviceable Cane From Chair writing and M&L Re-canning with 2mm wide plastic cane in Godrej pattern and 4 mm plastic cane for Parameter work (boundry ) in white colour complete all as Specified and directed by Eng-in Charge. Make: Shah/Premier/ Marcane/ maharashtra Co |
| 47 | CHAIR EASY FD-229, FD-17(M) : Removal of old unsv Font Legs of CHAIR EASY and S&F New seasoned teak wood Font Legs with exact dimensions as per drg and directed by Engg-in-Charge. |
| 48 | CHAIR EASY FD-229, FD-17(M): Removal of old unsv rear Legs of CHAIR EASY and S&F New seasoned teak rear Legs with exact dimensions as per drg and directed by Engg-in-Charge. |
| 49 | CHAIR EASY FD-229, FD-17(M) : Removal of old unsv side rail of CHAIR EASY and S&F New seasoned teak side rail with exact dimensions as per drg and directed by Engg-in-Charge. |
| 50 | CHAIR EASY FD-229, FD-17(M) : Removal of old unsv front rails of CHAIR EASY and S&F New seasoned teak front rails with exact dimensions as per drg and directed by Engg-in-Charge. |
| 51 | CHAIR EASY FD-229, FD-17(M) : Removal of old unsv back rails of CHAIR EASY and S&F New seasoned teak back rails with exact dimensions as per drg and directed by Engg-in-Charge. |
| 52 | CHAIR EASY FD-229, FD-17(M) : Removal of old unsv side rails of back frame of CHAIR EASY and S&F New seasoned teak side rails of back frame with exact dimensions as per drg and directed by Engg-in-Charge. |
| 53 | CHAIR EASY FD-229, FD-17(M) : Removal of old unsv top rail of back frame of CHAIR EASY and S&F New seasoned teak top rail of back frame with exact dimensions as per drg and directed by Engg-in-Charge. |
| 54 | CHAIR EASY FD-229, FD-17(M): Removal of old unsv bottom rail of back frame of CHAIR EASY and S&F New seasoned teak bottom rail of back frame with exact dimensions as per drg and directed by Engg-in-Charge. |
| 55 | CHAIR EASY FD-229, FD-17(M): Removal of old unsv stiffner of CHAIR EASY and S&F New seasoned teak stiffner with exact dimensions as per drg and directed by Engg-in-Charge. |
| 56 | CHAIR EASY FD-229, FD-17(M) : Removal of old unsv Arms of CHAIR EASY and S&F New seasoned teak Arms with exact dimensions as per drg and directed by Engg-in-Charge. |
| 57 | CHAIR EASY FD-229, FD-17(M): Remove old unsv PVC shoes and S&F New PVC shoes of best quality with 1/2\\" screw to the bottom of legs of Chair easy as directed by Engg-in-Charge. |
| 58 | Removing Old unserviceable Cane From Chair easy seat and back and Re-canning seat and back with 2mm wide plastic cane in Godrej pattern and 4 mm plastic cane for Parameter work (boundry )Make shall be Shah/Premier/ Marcane/ Maharashtra Co. in white colour Complete all as Specified and directed by Eng-in Charge. Note for BOQ Sr Item No. 1.01 to 7.12:-The above items shall be executed at different unit locations, MD Accns including at BSO furniture yard all as directed by Engineer-in-Charge/GE. Please Enable Macros to View BoQ information |
