|
| 1 | ALMIRAH LARGE STEEL (Drawing No. FD-1031)Taking down old unserviceable existing lock from almirah large steel and provide and fixing of new approved quality (ISI mark) brass lock of make : Harrison / Link / Ramson having six levers with duplicate keys alongwith key hole cover and fixed in position, complete all as specified and shown on drawing No. FD-1031 and as directed. |
| 2 | Taking down old unserviceable existing complete locking arrangements from almirah large steel and provide and fixing of new approved quality 3 way locking arrangements including steel rods, lock cover and other connected fixtures as required for smooth functioning of locking arrangements of approved quality, complete all as specified and shown on drawing No. FD-1031 and as directed. |
| 3 | Taking down old demaged / broken existing handle from almirah large steel and provide and fixing of new approved quality stainless steel handle and fixed in position, complete all as specified and shown on drawing No. FD-1031 and as directed. |
| 4 | Taking down old unserviceable existing legs from almirah large steel and provide and fixing of new approved quality legs thickness of leg sheet not less than 1mm and fixed in position, complete all as specified and shown on drawing No. FD-1031 and as directed. |
| 5 | Taking down unserviceable shelves from existing almirah large and supply and fixing of new shelf thickness of shelf sheet not less than 1mm, shape & size as specified on drawing No. FD-1031 and as directed. |
| 6 | M&L for scraping and removing old defective paint, dents, rust spots etc. from large steel almirah surfaces using abrasive paper/ cloth, preparing and smoothing the surface by applying putty where required and applying two coats of first quality synthetic enamel paint by spray method, complete in all respects as specified in drawing No. FD-1031 and as directed by the Engineer-in-Charge. Make :- Asian Paints / Nerolac / Berger |
| 7 | Taking down old dislocated shelves and refixing them in proper position by providing and fixing of new suitable hooks including necessary alignment, adjustments and making the shelves fully functional, complete all as specified and shown on drawing No. FD-1031 and as directed. |
| 8 | ALMIRAH MED STEEL (Drawing No. FD-1032)All as per srl item No. 1.00 here-in-above but almirah medium steel, complete all as specified and shown on drawing No. FD-1032 and as directed. |
| 9 | All as per srl item No. 2.00 here-in-here-in-above but almirah medium steel, complete all as specified and shown on drawing No. FD-1032 and as directed. |
| 10 | All as per srl item No. 3.00 here-in-here-in-above but almirah med steel, complete all as specified and shown on drawing No. FD-1032 and as directed. |
| 11 | All as per srl item No. 4.00 here-in-here-in-above but almirah medium steel, complete all as specified and shown on drawing No. FD-1032 and as directed. |
| 12 | All as per srl item No. 5.00 here-in-here-in-above but almirah medium steel, complete all as specified and shown on drawing No. FD-1032 and as directed. |
| 13 | All as per srl item No. 6.00 here-in-here-in-above but almirah medium steel, complete all as specified and shown on drawing No. FD-1032 and as directed. |
| 14 | All as per srl item No. 7.00 here-in-here-in-above but almirah medium steel, complete all as specified and shown on drawing No. FD-1032 and as directed. |
| 15 | TABLE OFFICE CLERK STEEL (Drawing No. FD-1004)Taking down of unserviceable top of table clk steel and S&F of new top made out of prelaminated MDF board exterior grade of 18/19mm thick, one side teak face other side white shade alongwith four first class teak wood beading, thickness of beading 4mm and width as per MDF board shall be fixed including two coats of french polish should be apply on the beading, complete all as specified and shown on drawing No. FD-1004 and as directed. Make of prelaminated particle board :- Greenply / Century / Action Tesa |
| 16 | Taking down of old unserviceable drawer of table clk steel, made out of 1mm thick MS sheet and S&F of new drawer having shape and size of existing drawer of table steel clk, complete all as specified and shown on drawing No. FD-1004 and as directed. |
| 17 | M&L for spot welding to existing cracked joints / broken leg and stiffener and other welding work of table office clk steel not exeeding 2.5cm in length as required and after welding joints be smoothen properly by grinding, complete all as specified and shown on drawing No. FD-1004 and as directed. |
| 18 | M&L for scraping and removing old defective paint spots/ denting from table clk steel leg with using abrasive cloth and making the surface smooth by filling putty etc. and applying two coats of synthetic enamel as required OG colour paint, complete all as specified and shown on drawing No. FD-1004 and as directed. Make of Paint :- Asian / Berger / Nerolac |
| 19 | TABLE OFFICE OFFICER STEEL (Drawing No. FD-1003)All as per item srl No. 15.00 here-in-above but table office offrs steel, complete all as specified and shown on drawing No. FD-1003 and as directed. |
| 20 | Taking down of old unserviceable drawers of table office officer steel, made out of 1mm thick MS sheet and S&F of new drawers having shape and size of existing drawers of table office officer steel, complete all as specified and shown on drawing No. FD-1003 and as directed. |
| 21 | Taking down of old unserviceable cupboard shutters of table office officer steel and provide and fixinf of new cupboard shutters, made out of 1mm thick MS sheet having shape and size of existing shutters of table office officer steel, complete all as specified and shown on drawing No. FD-1003 and as directed. |
| 22 | M&L for spot welding to existing cracked joints / broken leg and stiffener and other welding work of table office officer steel not exeeding 2.5cm in length as required and after welding joints be smoothen properly by grinding, complete all as specified and shown on drawing No. FD-1003 and as directed. |
| 23 | M&L for scraping and removing old defective paint spots/ denting from table officer steel leg wih using abrasive cloth and making the surface smooth by filling putty etc. and applying two coats of synthetic enamel as required OG colour paint, complete all as specified and shown on drawing No. FD-1003 and as directed. |
| 24 | CHARPOY GI PIPE PLYTOP (Drawing No. FD-220)Removing/ taking down of old unserviceable of plywood and broken components & tightening the frame in original shapea and supply and fixing of new plywood 12mm thick BWR phenolbonded along with components on the charpoy duly fixed with nuts and bolts as per the existing pattern, complete all as specified and shown on drawing No. FD-220 and as directed. Make :- Top brand/ model in Century / Greenply / Kitlpy (Phenol bonded) |
| 25 | Removing of old damaged / bend iron stiffeners and S&F of new stiffeners. Size shall be as per existing stiffeners and duly painted with black paint, complete all as specified and shown on drawing No. FD-220 and as directed. |
| 26 | Removing of old damaged GI threeway elbow and supply and fix of new GI 32mm threeway elbow (ISI Marked), complete all as specified and shown on drawing No. FD-220 and as directed. |
| 27 | Removing of old unserviceable damaged long rail and supply and fixing of new GI pipe 32mm dia (ISI Marked), length of long rail shown in drawing No. FD-220 and as directed. Make of GI Pipe :- Jindal / Surya / Prakash |
| 28 | Obtained damaged old unserviceable long rail from serial item No. 27.00 here-in-above and converted to short rail and fixed after threading both side as shown in drawing No. FD-220 and directed by Engrineer-in-Charge. |
| 29 | Obtained damaged old unserviceable short rail and converted to legs and fixed after threading as shown in drawing No. FD-220 and directed by Engineer-in- Charge. |
| 30 | Removing of old unserviceable damaged checknut and supply & fixing of new GI Checknut 32mm dia (ISI Marked) and fixed as shown in drawing No. FD-220 and as direcetd by Engineer-in-Charge. |
| 31 | TABLE STEEL 3' X 2' (Drawing No. FD-1007/1008)Removing of unserviceable table top of table 3' x 2' with/ without drawer steel and S&F of new table top made of 18mm thick prelaminated MDF board, complete all as specified and shown on drawing No. FD-1007/1008 and as directed. Make :- Century / Greenply / Kitply |
| 32 | M&L for painting to table steel 3’ x 2’ with/ without internally externally both sides on steel surface with synthetic enamel paint OG colour with two coats after denting as required treatment and applying putty, scraping and cleaning surface, complete all as specified and shown on drawing No. FD-1007/1008 and as directed. |
| 33 | CHAIR WRITING CUSHIONED (MAP) (Drawing No. FD-E6/MAP/12)Removing of existing old unserviceable seat and S&F of new hot pressed plywood upholsted with fabric and moulded plyurethane foam with PVC liping all round seat of chair writing cushioned with approved tapestry cloth, not less than Rs. 250.00 per mtr, complete all as specified and shown on drawing No. FD-E6/MAP/12 and as directed. |
| 34 | All as per srl item No. 33.00 here-in-above but back of chair writing, complete all as specified and shown on drawing No. FD-E6/MAP/12 and as directed. |
| 35 | Removing of old unserviceable arm rests of chair writing and S&F of new arm rest with accessories for fixing in accordance with drg, complete all as specified and shown on drawing No. FD-E6/MAP/12 and as directed. |
| 36 | M&L for spot welding to existing cracked / joints of chair writing cushioned MAP by gas welding not exceeding 2.5cm in length as required and after welding joints be plain/ smoothen steel structure properly by grinding, complete all as specified and shown on drawing No. FD-E6/MAP/12 and as directed. |
| 37 | M&L for scraping out old defective paint/ rusted spots from chair writing (MAP) with using abressive paper/ cloth and making the surface smooth by rectifying the bends/ dents of cantilever pipe and applying two coats of synthetic paint first quality by sprayer method including S&F of new nylon shoes for proper balance, complete all as specified and shown on drawing No. FD-E6/MAP/12 and as directed. Make :- Asian / Nerolac / Berger |
| 38 | BED PLY TOP STEEL (MAP) (Drawing No. FD/E6/MAP-08(R))Taking out unserviceable plywood from bed plywood steel and supply & fixing of new 12mm thick BWR/BWP, AA, plywood and fix with suitable round head steel nut and steel bolts of suitable size as fit to the bed from headrest to the footrest, complete all as specified and shown on drawing No. FD/E6/MAP-08(R) and as directed. Make of Plywood :- Century / Greenply / Wrown (Top model). |
| 39 | Removing of old unservieable existing headrest and S&F of new plank of headrest, made up of prelaminated MDF Board of 18/19mm thick duly covered with PVC beading all around. The shade of the headrest should be matched with existing footrest, complete all as specified and shown on drawing No. FD/E6/MAP-08(R) and as directed. Make :- Century / Greenply / Kitply / Action Tesa |
| 40 | Removing of old unserviceable footrest and S&F of new plank of footrest made up of prelaminated MDF board of 18/19mm duly covered with PVC beading all around. The shade of the footrest should be matched with existing headrest, complete all as specified and shown on drawing No. FD/E6/MAP-08(R) and as directed. Make :- Century / Greenply / Kitply / Action Tesa |
| 41 | M&L for spot welding to existing cracked/ joints of bed hard steel (MAP) by arc welding not exceeding 2.5cm in length as required and after welding joints be smoothen properly by grinding and proving suitable nuts and bolts to fix, complete all as specified and shown on drawing No. FD/E6/MAP-08(R) and as directed. |
| 42 | M&L for scratching out old defective paint/ rusted spots from bed hard steel (MAP) frame by abressive paper/ cloth and making the surface smooth by filling putty etc. and applying two coats of synthetic black enamel paint of first quality by sprayer method, complete all as specified and shown on drawing No. FD/E6/MAP-08(R) and as directed. Make :- Asian / Nerolac / Berger |
| 43 | SOFA SET 5 SEATER (Drawing No. FD-281)Supply and fixing of new foam cushions 40 density of size 22\\" x 21\\" x 4\\" of make : Sleepwell / Kurlon / Featherfoam (Top brand and model) duly covered with velvet/tapestry cloth not less than Rs. 450/- per metre, complete all as specified and shown on drawing No. FD-281 and as directed. |
| 44 | Taking down old unserviceable cover of seat and back of sofa set and supplying and fixing of new covers with velvet/ tapestry cloth not less than Rs.450/- per metre, complete all as specified and shown on drawing No. FD-281 and as directed. |
| 45 | M&L for applying two coats of french polish on the sofa set five seater after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper, complete all as specified and shown on drawing No. FD-281 and as directed. |
| 46 | CHAIR WRITING (Drawing No. FD-250)Removing of unserviceble front legs from chair writing and S&F of new approved quality seasoned teak wood new legs to match other legs as per existing pattern, complete all as specified and shown on drawing No. FD-250 and as directed. |
| 47 | All as per srl item No. 46.00 here-in-above but rear legs, complete all as specified and shown on drawing No. FD-250 and as directed. |
| 48 | All as per srl item No. 46.00 here-in-above but front/ back/ side rails of seat, complete all as specified and shown on drawing No. FD-250 and as directed. |
| 49 | All as per srl item No. 46.00 here-in-above but stiffener, complete all as specified and shown on drawing No. FD-250 and as directed. |
| 50 | All as per srl item No. 46.00 here-in-above but arms, complete all as specified and shown on drawing No. FD-250 and as directed. |
| 51 | M&L for applying two coats of french polish on the chair writing after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper, complete all as specified and shown on drawing No. FD-250 and as directed. |
| 52 | CHAIR DINING (Drawing No. FD-279) Removing of unserviceable front leg from chair dinning and S&F of new approved quality seasoned teak wood leg including polishing of new legs to match with other legs as per existing design, pattern, complete all as specified and shown on drawing No. FD-279 and as directed. |
| 53 | All as per srl item No. 52.00 here-in-above but rear legs, complete all as specified and shown on drawing No. FD-279 and as directed. |
| 54 | All as per srl item No. 52.00 here-in-above but front/ back/ side rails of seat, complete all as specified and shown on drawing No. FD-279 and as directed. |
| 55 | All as per srl item No. 52.00 here-in-above but back rest batten, complete all as specified and shown on drawing No. FD-279 and as directed. |
| 56 | All as per srl item No. 52.00 here-in-above but stiffener, complete all as specified and shown on drawing No. FD-279 and as directed. |
| 57 | S&F new nylon buffer at bottom of all legs of chair dining (Drawing No. FD-279), complete all as specified and directed. |
| 58 | M&L for applying two coats of french polish on the chair dining after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper, complete all as specified and shown on drawing No. FD-279 and as directed. |
| 59 | CHAIR EASY (Drawing No. FD-229)Removing of unserviceable front leg from chair easy and S&F of new approved quality seasoned teak wood leg including polishing of new leg to match with other legs as per existing design & pattern, complete all as specified and shown on drawing No. FD-229 and as directed. |
| 60 | All as per srl item No. 59.00 here-in-above but rear leg, complete all as specified and shown on drawing No. FD-229 and as directed. |
| 61 | All as per srl item No. 59.00 here-in-above but front / back / side rail of seat and back, complete all as specified and shown on drawing No. FD-229 and as directed. |
| 62 | S&F new nylon buffer at bottom of all legs of chair easy (Drawing No. FD-229), complete all as specified and directed. |
| 63 | All as per srl item No. 59.00 here-in-above but arm, complete all as specified and shown on drawing No. FD-229 and as directed. |
| 64 | M&L for applying two coats of french polish on the chair easy after preparing the old surface and making smooth surfaces by rubbing with suitable emery paper, complete all as specified and shown on drawing No. FD-229 and as directed. |
| 65 | CANNING OF CHAIR WOODEN OF ALL TYPES (Drawing Nos FD-250, 280, 16, 228, 279, 229)Removing of old unserviceable cane from all type of wooden chairs and supply and fixing of new approved quality (as approved by the GE) white plastic cane 2mm wide semi round and weaving the same in Godrej pattern. Canning holes shall be covered with 4mm wide semi round white plastic cane, complete all as shown on drawing Nos FD-250, 280, 16, 228, 279, 285, 229 and as directed by Engineer-in-Charge. Make :- Shah / Premium / Arihant S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
